Download or read book Advanced Multipoles for Accelerator Magnets written by Pierre Schnizer and published by Springer. This book was released on 2017-09-25 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents research on the transversal beam dynamics of accelerators and evaluates and describes the respective magnetic field homogeneity. The widely used cylindrical circular multipoles have disadvantages for elliptical apertures or curved trajectories, and the book also introduces new types of advanced multipole magnets, detailing their application, as well as the numerical data and measurements obtained. The research presented here provides more precise descriptions of the field and better estimates of the beam dynamics. Moreover, the effects of field inhomogeneity can be estimated with higher precision than before. These findings are further elaborated to demonstrate their usefulness for real magnets and accelerator set ups, showing their advantages over cylindrical circular multipoles. The research findings are complemented with data obtained from the new superconducting beam guiding magnet models (SIS100) for the FAIR (Facility for Antiproton and Ion Research) project. Lastly, the book offers a comprehensive survey of error propagation in multipole measurements and an appendix with Mathematica scripts to calculate advanced magnetic coil designs.
Download or read book Superconducting Accelerator Magnets written by Karl-hubert Mess and published by World Scientific. This book was released on 1996-08-30 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.
Download or read book Iron Dominated Electromagnets written by Jack T Tanabe and published by World Scientific Publishing Company. This book was released on 2005-05-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book, written by one of the world's foremost specialists in the field, is devoted to the design of low and medium field electromagnets whose field level and quality (uniformity) are dominated by the pole shape and saturation characteristics of the iron yoke. The wide scope covers material ranging from the physical requirements for typical high performance accelerators, through the mathematical relationships which describe the shape of two-dimensional magnetic fields, to the mechanical fabrication, assembly, installation, and alignment of magnets in a typical accelerator lattice. In addition, stored energy concepts are used to develop magnetic force relationships and expressions for magnets with time varying fields. The material in the book is derived from lecture notes used in a course at the Lawrence Livermore National Laboratory and subsequently expanded for the U.S. Particle Accelerator School, making this text an invaluable reference for students planning to enter the field of high energy physics. Mathematical relationships tying together magnet design and measurement theory are derived from first principles, and chapters are included that describe mechanical design, fabrication, installation, and alignment. Some fabrication and assembly practices are reviewed to ensure personnel and equipment safety and operational reliability of electromagnets and their power supply systems. This additional coverage makes the book an important resource for those already in the particle accelerator business as well as those requiring the design and fabrication of low and medium field level magnets for charged particle beam transport in ion implantation and medical applications.
Download or read book Particle Optics in High Intensity Accelerators written by J. G. Wang and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced high intensity accelerators have important applications in pulsed spallation neutron sources, synchrotron radiation light sources, radioactive ion beam facilities, etc. In contrast to traditional high energy physics accelerators, these high intensity accelerators require very high beam currents with relatively low particle energy. A common practice in the design of high intensity machines is to employ large aperture and short length magnets packed densely along beam lines in limited spaces. As a result, magnetic fringe fields become more profound, and the interference among adjacent magnets often causes problems for machine operation. This has become a new challenge for the design of high-intensity accelerators.This book describes how to solve the problems of magnetic fringe fields and interference, and how to correctly compute particle optics in advanced high intensity accelerators. The book has evolved from the authors research on the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). The author has developed the theory and technique of 3D-field multipole expansion, assisted by advanced 3D-magnet modeling codes and Mathematica scripts. Advanced 3D-magnet modeling produces accurate, discrete magnetic field data on selected boundaries in magnets. With these simulation data, the 3D-field multipole expansion will produce quasi-analytic field distributions within the boundaries. Furthermore, with mathematical tools, particle optics in magnets can be accurately computed with the fringe fields and interference effects taken into account automatically.The author applied the new theory and technique to the SNS quadrupoles, dipoles, other magnets, and beam transport lines. His new approach also helped to discover and to solve the design problems of the SNS ring injection and extraction during the SNS ring commissioning. These practices are described in great detail in this book, and can be followed by the design of any other accelerator project. In addition, based on the comments and feedback from students and readers, the book also includes many important command input files and Mathematica scripts, which should be very useful and can be directly employed by readers to compute particle optics in their own machines.
Download or read book Particle Optics in High Intensity Accelerators written by Jian Guang Wang and published by . This book was released on 2018 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced high intensity accelerators have important applications in pulsed spallation neutron sources, synchrotron radiation light sources, radioactive ion beam facilities, etc. In contrast to traditional high energy physics accelerators, these high intensity accelerators require very high beam currents with relatively low particle energy. A common practice in the design of high intensity machines is to employ large aperture and short length magnets packed densely along beam lines in limited spaces. As a result, magnetic fringe fields become more profound, and the interference among adjacent magnets often causes problems for machine operation. This has become a new challenge for the design of high-intensity accelerators.This book describes how to solve the problems of magnetic fringe fields and interference, and how to correctly compute particle optics in advanced high intensity accelerators. The book has evolved from the author's research on the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). The author has developed the theory and technique of 3D-field multipole expansion, assisted by advanced 3D-magnet modeling codes and Mathematica scripts. Advanced 3D-magnet modeling produces accurate, discrete magnetic field data on selected boundaries in magnets. With these simulation data, the 3D-field multipole expansion will produce quasi-analytic field distributions within the boundaries. Furthermore, with mathematical tools, particle optics in magnets can be accurately computed with the fringe fields and interference effects taken into account automatically.The author applied the new theory and technique to the SNS quadrupoles, dipoles, other magnets, and beam transport lines. His new approach also helped to discover and to solve the design problems of the SNS ring injection and extraction during the SNS ring commissioning. These practices are described in great detail in this book, and can be followed by the design of any other accelerator project. In addition, based on the comments and feedback from students and readers, the book also includes many important command input files and Mathematica scripts, which should be very useful and can be directly employed by readers to compute particle optics in their own machines.
Download or read book New Techniques for Future Accelerators III written by G. Torelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fundamental step towards gaining a deeper understanding of our world is to increase the resolution of the investigative instruments we use; i.e. to increase the energy, and hence to decrease the wavelength, of the particles which constitute our probes. Almost any substantial progress in our understanding of the fundamental laws of Nature has been obtained when a new generation of accelerators has allowed us to achieve a new energy range. The new results have generated new questions, thus encouraging us to construct new machines to reach even higher energy levels. The relative energy gain from one generation of accelerators to the next is progressively increasing. The energy ga in suggested by the theoretical predictions at the time has usually been much greater than the value allowed by our technical capabilities. But this smaller energy gain permitted by accelerator technology improvement has generally been sufficient up until now to bring about a substantial increase in our knowledge. Hence a large increase in accelerator energy is very important, and we know that this result can essentially be obtained by developing some new device or some new approach.
Download or read book Nb3Sn Accelerator Magnets written by Daniel Schoerling and published by Springer Nature. This book was released on 2019-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is written by world-recognized experts in the fields of applied superconductivity and superconducting accelerator magnet technologies. It provides a contemporary review and assessment of the experience in research and development of high-field accelerator dipole magnets based on Nb3Sn superconductor over the past five decades. The reader attains clear insight into the development and the main properties of Nb3Sn composite superconducting wires and Rutherford cables, and details of accelerator dipole designs, technologies and performance. Special attention is given to innovative features of the developed Nb3Sn magnets. The book concludes with a discussion of accelerator magnet needs for future circular colliders.
Download or read book Field Computation for Accelerator Magnets written by Stephan Russenschuck and published by John Wiley & Sons. This book was released on 2011-02-08 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert on the electromagnetic design and engineering of superconducting accelerator magnets, this book offers the most comprehensive treatment of the subject to date. In concise and easy-to-read style, the author lays out both the mathematical basis for analytical and numerical field computation and their application to magnet design and manufacture. Of special interest is the presentation of a software-based design process that has been applied to the entire production cycle of accelerator magnets from the concept phase to field optimization, production follow-up, and hardware commissioning. Included topics: Technological challenges for the Large Hadron Collider at CERN Algebraic structures and vector fields Classical vector analysis Foundations of analytical field computation Fields and Potentials of line currents Harmonic fields The conceptual design of iron- and coil-dominated magnets Solenoids Complex analysis methods for magnet design Elementary beam optics and magnet polarities Numerical field calculation using finite- and boundary-elements Mesh generation Time transient effects in superconducting magnets, including superconductor magnetization and cable eddy-currents Quench simulation and magnet protection Mathematical optimization techniques using genetic and deterministic algorithms Practical experience from the electromagnetic design of the LHC magnets illustrates the analytical and numerical concepts, emphasizing the relevance of the presented methods to a great many applications in electrical engineering. The result is an indispensable guide for high-energy physicists, electrical engineers, materials scientists, applied mathematicians, and systems engineers.
Download or read book Particle Accelerator Physics written by Helmut Wiedemann and published by Springer Science & Business Media. This book was released on 2003 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book serves as a thorough introduction to the field of high-energy particle accelerator physics and beam dynamics. Volume 1 provides a general understanding of the field and a firm basis for the study of the more elaborate topic, mainly nonlinear and higher-order beam dynamics, which is the subject of Volume 2.
Download or read book Particle Accelerator Physics written by Helmut Wiedemann and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book serves as a thorough introduction to the field of high-energy particle accelerator physics and beam dynamics. Volume 1 provides a general understanding of the field and a firm basis for the study of the more elaborate topic, mainly nonlinear and higher-order beam dynamics, which is the subject of Volume 2.
Download or read book Nb3Sn Accelerator Magnets written by Alexander V Zlobin and published by . This book was released on 2020-10-08 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is written by world-recognized experts in the fields of applied superconductivity and superconducting accelerator magnet technologies. It provides a contemporary review and assessment of the experience in research and development of high-field accelerator dipole magnets based on Nb3Sn superconductor over the past five decades. The reader attains clear insight into the development and the main properties of Nb3Sn composite superconducting wires and Rutherford cables, and details of accelerator dipole designs, technologies and performance. Special attention is given to innovative features of the developed Nb3Sn magnets. The book concludes with a discussion of accelerator magnet needs for future circular colliders.; Broadens our understanding of design and performance limits of high-field Nb3Sn accelerator magnets for a future very high energy hadron collider Offers beginners a concise overview of the relevant design concepts for a new generation of superconducting accelerator magnets based on Nb3Sn superconductor Illustrates the complete process of accelerator magnet design and fabrication Provides a contemporary review and assessment of the past experience with Nb3Sn high-field dipole accelerator magnets Identifies the main open R&D issues for Nb3Sn high-field dipole magnets This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Measurement and Alignment of Accelerator and Detector Magnets written by Stuart Turner and published by Cern European Organization for Nuclear Research. This book was released on 1998 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beam Dynamics In High Energy Particle Accelerators Second Edition written by Andrzej Wolski and published by World Scientific. This book was released on 2023-05-12 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-energy particle accelerators are as diverse as their uses, which range from scientific research in fields such as high-energy physics, materials science and the life sciences, to applications in industry and medicine. Despite the diversity of accelerators, the particle beams that they are designed to produce behave in ways that share many common features. Beam Dynamics in High Energy Particle Accelerators aims to provide an introduction to phenomena regularly encountered when working with beams in accelerators; from the basic principles of motion of relativistic particles in electromagnetic fields, to instabilities that can affect beam quality in machines operating at high current. This book assumes no prior experience with accelerator physics and develops the subject in a way that provides a solid foundation for more advanced study of specific topics.As well as including numerous revisions and improvements in the text, this second edition features substantial new material, including sections on fringe fields in multipole magnets, Verlet integration for particle tracking, and measurement of beam emittances. References and discussions of current topics have been updated. As with the first edition, the aim is to provide practical and powerful tools and techniques for the study of beam dynamics, while emphasizing the elegance of the subject and helping the reader develop a deep understanding of the relevant physics.
Download or read book High Field Superconducting Magnets written by Fred M. Ašner and published by Oxford University Press. This book was released on 1999 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconducting devices, which can carry huge currents and generate strong magnetic fields without losing energy, are improving at a tremendous pace. This book provides a modern, up-to-date reference on both the physics and the technology of superconducting magnets. It is unique in combining the theoretical aspects of superconductivity, electromagnetic field theory, and the thermodynamics of helium cooling with the technological details of producing and engineering high performance superconducting materials. The book provides the reliable, expert advice for designing, manufacturing, and testing complex high field superconducting magnets of predictable performance, and it places particular emphasis on beam transport and accelerator magnets in high energy particle physics.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1984 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science and Technology of Particle Accelerators written by Rob Appleby and published by CRC Press. This book was released on 2020-12-27 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Particle Accelerators provides an accessible introduction to the field, and is suitable for advanced undergraduates, graduate students, and academics, as well as professionals in national laboratories and facilities, industry, and medicine who are designing or using particle accelerators. Providing integrated coverage of accelerator science and technology, this book presents the fundamental concepts alongside detailed engineering discussions and extensive practical guidance, including many numerical examples. For each topic, the authors provide a description of the physical principles, a guide to the practical application of those principles, and a discussion of how to design the components that allow the application to be realised. Features: Written by an interdisciplinary and highly respected team of physicists and engineers from the Cockcroft Institute of Accelerator Science and Technology in the UK Accessible style, with many numerical examples Contains an extensive set of problems, with fully worked solutions available Rob Appleby is an academic member of staff at the University of Manchester, and Chief Examiner in the Department of Physics and Astronomy. Graeme Burt is an academic member of staff at the University of Lancaster, and previous Director of Education at the Cockcroft Institute. James Clarke is head of Science Division in the Accelerator Science and Technology Centre at STFC Daresbury Laboratory. Hywel Owen is an academic member of staff at the University of Manchester, and Director of Education at the Cockcroft Institute. All authors are researchers within the Cockcroft Institute of Accelerator Science and Technology and have extensive experience in the design and construction of particle accelerators, including particle colliders, synchrotron radiation sources, free electron lasers, and medical and industrial accelerator systems.
Download or read book Handbook of Magnetism and Advanced Magnetic Materials 5 Volume Set written by Helmut Kronmüller and published by Wiley-Interscience. This book was released on 2007-09-11 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the first application of the oxide magnetite as a compass in China in ancient times, and from the early middle ages in Europe, magnetic materials have become an indispensable part of our daily life. Magnetic materials are used ubiquitously in the modern world, in fields as diverse as, for example, electrical energy transport, high-power electro-motors and generators, telecommunication systems, navigation equipment, aviation and space operations, micromechanical automation, medicine, magnetocaloric refrigeration, computer science, high density recording, non-destructive testing of materials, and in many household applications. Research in many of these areas continues apace. The progress made in recent years in computational sciences and advanced material preparation techniques has dramatically improved our knowledge of fundamental properties and increased our ability to produce materials with highly-tailored magnetic properties, even down to the nanoscale dimension. Containing approximately 120 chapters written and edited by acknowledged world leaders in the field, The Handbook of Magnetism and Advanced Magnetic Materials provides a state-of-the-art, comprehensive overview of our current understanding of the fundamental properties of magnetically ordered materials, and their use in a wide range of sophisticated applications. The Handbook is published in five themed volumes, as follows: Volume 1- Fundamentals and Theory Volume 2- Micromagnetism Volume 3- Novel Techniques for Characterizing and Preparing Samples Volume 4- Novel Materials Volume 5- Spintronics and Magnetoelectronics
