Download or read book Advanced Mathematics for FPGA and DSP Programmers written by Tim Cooper and published by . This book was released on 2014-03-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Mathematics for FPGA and DSP Programmers covers the mathematical concepts involved in FPGA and DSP programing that can make or break a project. Coverage includes Numbers and Representation, Signals and Noise, Complex Arithmetic, Statistics, Correlation and Convolution, Frequencies, The FFT, Filters, Decimating and Interpolating, Practical Applications, Dot Product Applications, and a glossary of DSP arithmetical terms. About the Author Tim Cooper has been developing real-time embedded and signal processing software for commercial and military applications for over 30 years. Mr. Cooper has authored numerous device drivers, board support packages, and signal processing applications for real-time-operating systems. Mr. Cooper has also authored high-performance signal processing libraries based on SIMD architectures. Other signal processing experience includes MATLAB algorithm development and verification, and working with FPGA engineers to implement and validate signal processing algorithms in VHDL. Much of Mr. Cooper's experience involves software development for systems having hard real-time requirements and deeply embedded processors, where software reliability, performance, and latency are significant cost drivers. Such systems typically require innovative embedded instrumentation that collects performance data without competing for processing resources. Mr. Cooper holds a Bachelor of Science in Computer Sciences and a Master's degree in Computer and Electronics Engineering from George Mason University.

Download or read book Advances in Communication Devices and Networking written by Sourav Dhar and published by Springer Nature. This book was released on 2022-08-29 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent trends in the field of devices, wireless communication and networking. It gathers selected papers presented at the 5th International Conference on Communication, Devices and Networking (ICCDN 2021), which was organized by the Department of Electronics and Communication Engineering, Sikkim Manipal Institute of Technology, Sikkim, India, on 15–16 December 2021. Gathering cutting-edge research papers prepared by researchers, engineers and industry professionals, it will help young and experienced scientists and developers alike to explore new perspectives and offer them inspirations on how to address real-world problems in the areas of electronics, communication, devices and networking.

Download or read book Advanced FPGA Design written by Steve Kilts and published by John Wiley & Sons. This book was released on 2007-06-18 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the advanced issues of FPGA design as the underlying theme of the work. In practice, an engineer typically needs to be mentored for several years before these principles are appropriately utilized. The topics that will be discussed in this book are essential to designing FPGA's beyond moderate complexity. The goal of the book is to present practical design techniques that are otherwise only available through mentorship and real-world experience.

Download or read book FPGA based Implementation of Signal Processing Systems written by Roger Woods and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important working resource for engineers and researchers involved in the design, development, and implementation of signal processing systems The last decade has seen a rapid expansion of the use of field programmable gate arrays (FPGAs) for a wide range of applications beyond traditional digital signal processing (DSP) systems. Written by a team of experts working at the leading edge of FPGA research and development, this second edition of FPGA-based Implementation of Signal Processing Systems has been extensively updated and revised to reflect the latest iterations of FPGA theory, applications, and technology. Written from a system-level perspective, it features expert discussions of contemporary methods and tools used in the design, optimization and implementation of DSP systems using programmable FPGA hardware. And it provides a wealth of practical insights—along with illustrative case studies and timely real-world examples—of critical concern to engineers working in the design and development of DSP systems for radio, telecommunications, audio-visual, and security applications, as well as bioinformatics, Big Data applications, and more. Inside you will find up-to-date coverage of: FPGA solutions for Big Data Applications, especially as they apply to huge data sets The use of ARM processors in FPGAs and the transfer of FPGAs towards heterogeneous computing platforms The evolution of High Level Synthesis tools—including new sections on Xilinx's HLS Vivado tool flow and Altera's OpenCL approach Developments in Graphical Processing Units (GPUs), which are rapidly replacing more traditional DSP systems FPGA-based Implementation of Signal Processing Systems, 2nd Edition is an indispensable guide for engineers and researchers involved in the design and development of both traditional and cutting-edge data and signal processing systems. Senior-level electrical and computer engineering graduates studying signal processing or digital signal processing also will find this volume of great interest.

Download or read book The Design Warrior s Guide to FPGAs written by Clive Maxfield and published by Elsevier. This book was released on 2004-06-16 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field Programmable Gate Arrays (FPGAs) are devices that provide a fast, low-cost way for embedded system designers to customize products and deliver new versions with upgraded features, because they can handle very complicated functions, and be reconfigured an infinite number of times. In addition to introducing the various architectural features available in the latest generation of FPGAs, The Design Warrior's Guide to FPGAs also covers different design tools and flows.This book covers information ranging from schematic-driven entry, through traditional HDL/RTL-based simulation and logic synthesis, all the way up to the current state-of-the-art in pure C/C++ design capture and synthesis technology. Also discussed are specialist areas such as mixed hardward/software and DSP-based design flows, along with innovative new devices such as field programmable node arrays (FPNAs). Clive "Max" Maxfield is a bestselling author and engineer with a large following in the electronic design automation (EDA)and embedded systems industry. In this comprehensive book, he covers all the issues of interest to designers working with, or contemplating a move to, FPGAs in their product designs. While other books cover fragments of FPGA technology or applications this is the first to focus exclusively and comprehensively on FPGA use for embedded systems. - First book to focus exclusively and comprehensively on FPGA use in embedded designs - World-renowned best-selling author - Will help engineers get familiar and succeed with this new technology by providing much-needed advice on choosing the right FPGA for any design project

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book FPGA Design written by Philip Simpson and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: In August of 2006, an engineering VP from one of Altera’s customers approached Misha Burich, VP of Engineering at Altera, asking for help in reliably being able to predict the cost, schedule and quality of system designs reliant on FPGA designs. At this time, I was responsible for defining the design flow requirements for the Altera design software and was tasked with investigating this further. As I worked with the customer to understand what worked and what did not work reliably in their FPGA design process, I noted that this problem was not unique to this one customer. The characteristics of the problem are shared by many Corporations that implement designs in FPGAs. The Corporation has many design teams at different locations and the success of the FPGA projects vary between the teams. There is a wide range of design experience across the teams. There is no working process for sharing design blocks between engineering teams. As I analyzed the data that I had received from hundreds of customer visits in the past, I noticed that design reuse among engineering teams was a challenge. I also noticed that many of the design teams at the same Companies and even within the same design team used different design methodologies. Altera had recently solved this problem as part of its own FPGA design software and IP development process.

Download or read book Digital Design of Signal Processing Systems written by Shoab Ahmed Khan and published by John Wiley & Sons. This book was released on 2011-02-02 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Design of Signal Processing Systems discusses a spectrum of architectures and methods for effective implementation of algorithms in hardware (HW). Encompassing all facets of the subject this book includes conversion of algorithms from floating-point to fixed-point format, parallel architectures for basic computational blocks, Verilog Hardware Description Language (HDL), SystemVerilog and coding guidelines for synthesis. The book also covers system level design of Multi Processor System on Chip (MPSoC); a consideration of different design methodologies including Network on Chip (NoC) and Kahn Process Network (KPN) based connectivity among processing elements. A special emphasis is placed on implementing streaming applications like a digital communication system in HW. Several novel architectures for implementing commonly used algorithms in signal processing are also revealed. With a comprehensive coverage of topics the book provides an appropriate mix of examples to illustrate the design methodology. Key Features: A practical guide to designing efficient digital systems, covering the complete spectrum of digital design from a digital signal processing perspective Provides a full account of HW building blocks and their architectures, while also elaborating effective use of embedded computational resources such as multipliers, adders and memories in FPGAs Covers a system level architecture using NoC and KPN for streaming applications, giving examples of structuring MATLAB code and its easy mapping in HW for these applications Explains state machine based and Micro-Program architectures with comprehensive case studies for mapping complex applications The techniques and examples discussed in this book are used in the award winning products from the Center for Advanced Research in Engineering (CARE). Software Defined Radio, 10 Gigabit VoIP monitoring system and Digital Surveillance equipment has respectively won APICTA (Asia Pacific Information and Communication Alliance) awards in 2010 for their unique and effective designs.

Download or read book Digital Systems Design with FPGAs and CPLDs written by Ian Grout and published by Elsevier. This book was released on 2011-04-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Systems Design with FPGAs and CPLDs explains how to design and develop digital electronic systems using programmable logic devices (PLDs). Totally practical in nature, the book features numerous (quantify when known) case study designs using a variety of Field Programmable Gate Array (FPGA) and Complex Programmable Logic Devices (CPLD), for a range of applications from control and instrumentation to semiconductor automatic test equipment.Key features include:* Case studies that provide a walk through of the design process, highlighting the trade-offs involved.* Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.With this book engineers will be able to:* Use PLD technology to develop digital and mixed signal electronic systems* Develop PLD based designs using both schematic capture and VHDL synthesis techniques* Interface a PLD to digital and mixed-signal systems* Undertake complete design exercises from design concept through to the build and test of PLD based electronic hardwareThis book will be ideal for electronic and computer engineering students taking a practical or Lab based course on digital systems development using PLDs and for engineers in industry looking for concrete advice on developing a digital system using a FPGA or CPLD as its core. - Case studies that provide a walk through of the design process, highlighting the trade-offs involved. - Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.

Download or read book FPGAs for Software Programmers written by Dirk Koch and published by Springer. This book was released on 2016-06-17 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes powerful Field Programmable Gate Array (FPGA) and reconfigurable technology accessible to software engineers by covering different state-of-the-art high-level synthesis approaches (e.g., OpenCL and several C-to-gates compilers). It introduces FPGA technology, its programming model, and how various applications can be implemented on FPGAs without going through low-level hardware design phases. Readers will get a realistic sense for problems that are suited for FPGAs and how to implement them from a software designer’s point of view. The authors demonstrate that FPGAs and their programming model reflect the needs of stream processing problems much better than traditional CPU or GPU architectures, making them well-suited for a wide variety of systems, from embedded systems performing sensor processing to large setups for Big Data number crunching. This book serves as an invaluable tool for software designers and FPGA design engineers who are interested in high design productivity through behavioural synthesis, domain-specific compilation, and FPGA overlays. Introduces FPGA technology to software developers by giving an overview of FPGA programming models and design tools, as well as various application examples; Provides a holistic analysis of the topic and enables developers to tackle the architectural needs for Big Data processing with FPGAs; Explains the reasons for the energy efficiency and performance benefits of FPGA processing; Provides a user-oriented approach and a sense for where and how to apply FPGA technology.

Download or read book Digital Signal Processing 101 written by Michael Parker and published by Newnes. This book was released on 2010-05-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing 101: Everything You Need to Know to Get Started provides a basic tutorial on digital signal processing (DSP). Beginning with discussions of numerical representation and complex numbers and exponentials, it goes on to explain difficult concepts such as sampling, aliasing, imaginary numbers, and frequency response. It does so using easy-to-understand examples and a minimum of mathematics. In addition, there is an overview of the DSP functions and implementation used in several DSP-intensive fields or applications, from error correction to CDMA mobile communication to airborne radar systems. This book is intended for those who have absolutely no previous experience with DSP, but are comfortable with high-school-level math skills. It is also for those who work in or provide components for industries that are made possible by DSP. Sample industries include wireless mobile phone and infrastructure equipment, broadcast and cable video, DSL modems, satellite communications, medical imaging, audio, radar, sonar, surveillance, and electrical motor control. - Dismayed when presented with a mass of equations as an explanation of DSP? This is the book for you! - Clear examples and a non-mathematical approach gets you up to speed with DSP - Includes an overview of the DSP functions and implementation used in typical DSP-intensive applications, including error correction, CDMA mobile communication, and radar systems

Download or read book Practical Signal Processing written by Mark Owen and published by Cambridge University Press. This book was released on 2007-05-17 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic theory of digital signal processing, with emphasis on real-world applications.

Download or read book Exploring Zynq Mpsoc written by Louise H Crockett and published by . This book was released on 2019-04-11 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the Zynq MPSoC (Multi-Processor System-on-Chip), an embedded device from Xilinx. The Zynq MPSoC combines a sophisticated processing system that includes ARM Cortex-A53 applications and ARM Cortex-R5 real-time processors, with FPGA programmable logic. As well as guiding the reader through the architecture of the device, design tools and methods are also covered in detail: both the conventional hardware/software co-design approach, and the newer software-defined methodology using Xilinx's SDx development environment. Featured aspects of Zynq MPSoC design include hardware and software development, multiprocessing, safety, security and platform management, and system booting. There are also special features on PYNQ, the Python-based framework for Zynq devices, and machine learning applications. This book should serve as a useful guide for those working with Zynq MPSoC, and equally as a reference for technical managers wishing to gain familiarity with the device and its associated design methodologies.

Download or read book Digital Signal Processing with Field Programmable Gate Arrays written by Uwe Meyer-Baese and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starts with an overview of today's FPGA technology, devices, and tools for designing state-of-the-art DSP systems. A case study in the first chapter is the basis for more than 30 design examples throughout. The following chapters deal with computer arithmetic concepts, theory and the implementation of FIR and IIR filters, multirate digital signal processing systems, DFT and FFT algorithms, and advanced algorithms with high future potential. Each chapter contains exercises. The VERILOG source code and a glossary are given in the appendices, while the accompanying CD-ROM contains the examples in VHDL and Verilog code as well as the newest Altera "Baseline" software. This edition has a new chapter on adaptive filters, new sections on division and floating point arithmetics, an up-date to the current Altera software, and some new exercises.

Download or read book Communication System Design Using DSP Algorithms written by Steven A. Tretter and published by Springer Science & Business Media. This book was released on 2008-01-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for senior electrical engineering students, this textbook explores the theoretical concepts of digital signal processing and communication systems by presenting laboratory experiments using real-time DSP hardware. This new edition updates the experiments based on the TMS320C6713 (but can easily be adapted to other DSP boards). Each chapter begins with a presentation of the required theory and concludes with instructions for performing experiments to implement the theory. In the process of performing the experiments, students gain experience in working with software tools and equipment commonly used in industry.

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Partitioned convolution algorithms for real time auralization written by Frank Wefers and published by Logos Verlag Berlin GmbH. This book was released on 2015-05-11 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses methods for efficient audio processing with finite impulse response (FIR) filters. Such filters are widely used for high-quality acoustic signal processing, e.g. for headphone or loudspeaker equalization, in binaural synthesis, in spatial sound reproduction techniques and for the auralization of reverberant environments. This work focuses on real-time applications, where the audio processing is subject to minimal delays (latencies). Different fast convolution concepts (transform-based, interpolation-based and number-theoretic), which are used to implement FIR filters efficiently, are examined regarding their applicability in real-time. These fast, elementary techniques can be further improved by the concept of partitioned convolution. This work introduces a classification and a general framework for partitioned convolution algorithms and analyzes the algorithmic classes which are relevant for real-time filtering: Elementary concepts which do not partition the filter impulse response (e.g. regular Overlap-Add and Overlap-Save convolution) and advanced techniques, which partition filters uniformly and non-uniformly. The algorithms are thereby regarded in their analytic complexity, their performance on target hardware, the optimal choice of parameters, assemblies of multiple filters, multi-channel processing and the exchange of filter impulse responses without audible artifacts. Suitable convolution techniques are identified for different types of audio applications, ranging from resource-aware auralizations on mobile devices to extensive room acoustics audio rendering using dedicated multi-processor systems.