Download or read book Advanced Materials and Engineering Materials III written by Katsuyuki Kida and published by Trans Tech Publications Ltd. This book was released on 2014-02-19 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of Selected, Peer Reviewed Papers from the 2013 3rd International Conference on Advanced Materials and Engineering Materials 2013 (3rd ICAMEM 2013), December 14-15, 2013, Singapore. The 173 papers are grouped as follows: Chapter 1: Materials Science, Chapter 2: Nanomaterials and Nanotechnologies, Chapter 3: Polymers and Composites, Chapter 4: Metals and Alloys, Chapter 5: Biomaterials, Chapter 6: Thin Film and DLC Coating, Chapter 7: Building and Road Materials, Chapter 8: Manufacturing Technology and Processing, Chapter 9: Structural Materials and Systems, Chapter 10: Materials Application.

Download or read book Advanced Engineering Materials III written by Jing Long Bu and published by Trans Tech Publications Ltd. This book was released on 2013-08-30 with total page 2500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China

Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.

Download or read book Advanced Materials Science and Engineering of Carbon written by Michio Inagaki and published by Butterworth-Heinemann. This book was released on 2013-09-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials are exceptionally diverse in their preparation, structure, texture, and applications. In Advanced Materials Science and Engineering of Carbon, noted carbon scientist Michio Inagaki and his coauthors cover the most recent advances in carbon materials, including new techniques and processes, carbon materials synthesis, and up-to-date descriptions of current carbon-based materials, trends and applications. Beginning with the synthesis and preparation of nanocarbons, carbon nanotubes, and graphenes, the book then reviews recently developed carbonization techniques, such as templating, electrospinning, foaming, stress graphitization, and the formation of glass-like carbon. The last third of the book is devoted to applications, featuring coverage of carbon materials for energy storage, electrochemical capacitors, lithium-ion rechargeable batteries, and adsorptive storage of hydrogen and methane for environmental protection, photocatalysis, spilled oil recovery, and nuclear applications of isotropic high-density graphite.

Download or read book Advanced Material Engineering Proceedings Of The 2015 International Conference written by Yongchang Liu and published by World Scientific. This book was released on 2015-09-08 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of papers presented at the 2015 International Conference on Advanced Material Engineering (AME 2015), held in Guangzhou, China. With the rapid development of industry and information technology, researchers across all fields began to discuss new ideas related to materials science and manufacturing technology. This proceedings provide a valuable insight from researchers and scientists who exchanged their ideas in the conference.

Download or read book Handbook of Advanced Materials Testing written by Louise Ferrante and published by CRC Press. This book was released on 1994-11-29 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses techniques for developing new engineering materials such as elastomers, plastic blends, composites, ceramics and high-temperature alloys. Instrumentation for evaluating their properties and identifying potential end uses are presented.;The book is intended for materials, manufacturing, mechanical, chemical and metallurgical engi

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Mechanics of Advanced Materials written by Vadim V. Silberschmidt and published by Springer. This book was released on 2015-04-09 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc. The last decades have seen a large extension of types of materials employed in various applications. In many cases these materials demonstrate mechanical properties and performance that vary significantly from those of their traditional counterparts. Such uniqueness is sought – or even specially manufactured – to meet increased requirements on modern components and structures related to their specific use. As a result, mechanical behaviors of these materials under different loading and environmental conditions are outside the boundaries of traditional mechanics of materials, presupposing development of new characterization techniques, theoretical descriptions and numerical tools. The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc.

Download or read book Advanced Materials written by Shun-Hsyung Chang and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.

Download or read book Advanced Materials and Engineering Materials written by Sally Gao and published by Trans Tech Publications Ltd. This book was released on 2012-01-24 with total page 1700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference provided a platform for the presentation of cutting-edge work in the management of Advanced Materials and Engineering Materials. The 292 papers are grouped into the chapters: 1: Advanced Materials Science, 2: Engineering Research, 3: Materials and Information Technology, 4: Materials Processing Technology, 5: Mechanical and Computer Control, 6: System Analysis and Industrial Engineering, 7: Intelligent Mechatronics and 8: Signal Processing. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Download or read book Advanced Materials Engineering and Technology II written by Mohd Mustafa Al Bakri Abdullah and published by . This book was released on 2014-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Conference on Advanced Materials Engineering and Technology (ICAMET 2013), November 28-29, 2013, Bandung, Indonesia

Download or read book Advanced Surface Engineering Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-09-14 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced surfaces enriches the high-throughput engineering of physical and chemical phenomenon in relatin to electrical, magnetic, electronics, thermal and optical controls, as well as large surface areas, protective coatings against water loss and excessive gas exchange. A more sophisticated example could be a highly selective surface permeability allowing passive diffusion and selective transport of molecules in the water or gases. The smart surface technology provides an interlayer model which prevents the entry of substances without affecting the properties of neighboring layers. A number of methods have been developed for coatings, which are essential building blocks for the top-down and/or bottom-up design of numerous functional materials. Advanced Surface Engineering Materials offers a detailed up-to-date review chapters on the functional coatings and adhesives, engineering of nanosurfaces, high-tech surface, characterization and new applications. The 13 chapters in this book are divided into 3 parts (Functional coatings and adhesives; Engineering of nanosurfaces; High-tech surface, characterization and new applications) and are all written by worldwide subject matter specialists. The book is written for readers from diverse backgrounds across chemistry, physics, materials science and engineering, medical science, environmental, bio- and nano- technologies and biomedical engineering. It offers a comprehensive view of cutting-edge research on surface engineering materials and their technological importance.

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Advanced Materials and Engineering Materials VII written by Peng Sheng Wei and published by Trans Tech Publications Ltd. This book was released on 2018-08-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7th International Conference on Advanced Materials and Engineering Materials (7th ICAMEM 2018) Selected, peer reviewed papers from the 7th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2018), May 17-18, 2018, Bangkok, Thailand

Download or read book Selection and Use of Engineering Materials written by J A Charles and published by Elsevier. This book was released on 2013-10-22 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selection and Use of Engineering Materials, Second Edition covers the substantial development in the selection and application of materials and of associated materials. This book is organized into four parts encompassing 20 chapters that also consider the advances in materials databases and computer programs. The first part deals with the motivation, cost basis, service requirements, failure analysis, specifications, and quality control of engineering materials. The second part describes the mechanical properties of these materials, including static strength, toughness, stiffness, fatigue, creep, and temperature resistance. The third part examines the selection requirements for surface durability, such as corrosion and wear resistance. This part also explores the relationship between materials selection and materials processing, as well as the formalization of selection procedures. The fourth part provides some case studies in materials selection. This book will prove useful to materials scientists and practicing engineers.

Download or read book Applied Materials Science written by Deborah D. L. Chung and published by CRC Press. This book was released on 2001-06-13 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are the foundation of technology. As such, most universities provide engineering undergraduates with the fundamental concepts of materials science, including crystal structures, imperfections, phase diagrams, materials processing, and materials properties. Few, however, offer the practical, applications-oriented background that their stud

Download or read book Advanced Materials and Engineering Materials VI written by Katsuyuki Kida and published by Trans Tech Publications Ltd. This book was released on 2017-08-10 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: 6th ICAMEM Selected, peer reviewed papers from the 6th International Conference of Advanced Materials and Engineering Materials (ICAMEM), March 11-12, 2017, Singapore