Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-04-27 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements

Download or read book Radiation Technology for Advanced Materials written by Guozhong Wu and published by Academic Press. This book was released on 2018-11-26 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation Technology for Advanced Materials presents a range of radiation technology applications for advanced materials. The book aims to bridge the gap between researchers and industry, describing current uses and future prospects. It describes the mature radiation processing technology used in preparing heat shrinkable materials and in wire and cable materials, giving commercial cases. In addition, the book illustrates future applications, including high-performance fibers, special self-lubricating materials, special ultra-fine powder materials, civil fibers, natural polymeric materials, battery separator membranes, special filtration materials and metallic nanomaterials. Chapters cover radiation technology in high-performance fiber and functional textiles, radiation crosslinking and typical applications, radiation crosslinking for polymer foaming material, radiation degradation and application, radiation emulsion polymerization, radiation effects of ionic liquids, radiation technology in advanced new materials, and future prospects. Presents a range of radiation technology applications and their application to advanced materials Covers the mature radiation processing technology used to prepare heat shrinkable materials and wire cable materials, describing real-world commercial applications Shows the promising application of radiation technology in preparing high-performance Si and carbon fibers Describes the radiation degradation/radiation effect used to prepare fine powder materials Discusses radiation modification and radiation grafting techniques used to synthesize materials, such as civil fibers, natural polymeric materials and others

Download or read book Advanced Materials for Renewable Energy written by Aripriharta, and published by Trans Tech Publications Ltd. This book was released on 2020-07-03 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed papers from the Annual International Conference on Renewable Energy (ICORE 2019) Selected, peer-reviewed papers from the annual International Conference on Renewable Energy (ICORE 2019), August 9-10, 2019, Malang, East Java, Indonesia

Download or read book Advanced Materials for Defense written by Raul Fangueiro and published by Springer Nature. This book was released on 2020-01-02 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of high quality research and review papers submitted to the 1st World Conference on Advanced Materials for Defense (AUXDEFENSE 2018). A wide range of topics related to the defense area such as ballistic protection, impact and energy absorption, composite materials, smart materials and structures, nanomaterials and nano structures, CBRN protection, thermoregulation, camouflage, auxetic materials, and monitoring systems is covered. Written by the leading experts in these subjects, this work discusses both technological advances in terms of materials as well as product designing, analysis as well as case studies. This volume will prove to be a valuable resource for researchers and scientists from different engineering disciplines such as materials science, chemical engineering, biological sciences, textile engineering, mechanical engineering, environmental science, and nanotechnology.

Download or read book Advanced Materials written by Theodorus van de Ven and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials gives an unique insight into the specialized materials that are required to run our modern society. Provided within are the fundamental theories and applications of advanced materials for metals, glasses, polymers, composites, and nanomaterials. This book is ideal for scientists and engineers of materials science, chemistry, physics, and engineering, and students of these disciplines.

Download or read book Joining Processes for Dissimilar and Advanced Materials written by Pawan Kumar Rakesh and published by Woodhead Publishing. This book was released on 2021-11-13 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining Processes for Dissimilar and Advanced Materials describes how to overcome the many challenges involved in the joining of similar and dissimilar materials resulting from factors including different thermal coefficients and melting points. Traditional joining processes are ineffective with many newly developed materials. The ever-increasing industrial demands for production efficiency and high-performance materials are also pushing this technology forward. The resulting emergence of advanced micro- and nanoscale material joining technologies, have provided many solutions to these challenges. Drawing on the latest research, this book describes primary and secondary processes for the joining of advanced materials such as metals and alloys, intermetallics, ceramics, glasses, polymers, superalloys, electronic materials and composites in similar and dissimilar combinations. It also covers details of joint design, quality assurance, economics and service life of the product. Provides valuable information on innovative joining technologies including induction heating of metals, ultrasonic heating, and laser heating at micro- and nanoscale levels Describes the newly developed modelling, simulation and digitalization of the joining process Includes a methodology for characterization of joints

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Polymers and Other Advanced Materials written by Ting Joo Fai and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Frontiers of Polymers and Advanced Materials held in Kuala Lumpur, Malaysia, January 16-20, 1995

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2018-05-12 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2017 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 (Jabalpur, India, 14–16 October, 2017), which is devoted to processing techniques, physics, mechanics, and applications of advanced materials. The book focuses on a wide spectrum of nanostructures, ferroelectric crystals, materials and composites as well as promising materials with special properties. It presents nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques and physical and mechanical studies of the structural and physical–mechanical properties of materials. Various original mathematical and numerical methods are applied to the solution of different technological, mechanical and physical problems that are interesting from theoretical, modeling and experimental points of view. Further, the book highlights novel devices with high accuracy, longevity and extended capabilities to operate under wide temperature and pressure ranges and aggressive media, which show improved characteristics, thanks to the developed materials and composites, opening new possibilities for different physico-mechanical processes and phenomena.

Download or read book Advanced Materials for Water Handling written by D.V. Scott and published by Elsevier. This book was released on 2000-08-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid evolution is taking place in the water market world wide - driven by increased consumer demand allied to the rarefraction of clean water. The inherent characteristics of composites materials associated with current materials and production technology is allowing the increased use of previously high cost materials and processes at ever decreasing costs. The Handbook is designed to bring specifiers up to speed with these materials and the new areas of application associated with them, exploring the scope, performance, cost effectiveness and environmental and legislative consequences of their use.

Download or read book Advanced Composite Materials for Automotive Applications written by Ahmed Elmarakbi and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces many challenges, including increased global competition, the need for higher-performance vehicles, a reduction in costs and tighter environmental and safety requirements. The materials used in automotive engineering play key roles in overcoming these issues: ultimately lighter materials mean lighter vehicles and lower emissions. Composites are being used increasingly in the automotive industry due to their strength, quality and light weight. Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness provides a comprehensive explanation of how advanced composite materials, including FRPs, reinforced thermoplastics, carbon-based composites and many others, are designed, processed and utilized in vehicles. It includes technical explanations of composite materials in vehicle design and analysis and covers all phases of composite design, modelling, testing and failure analysis. It also sheds light on the performance of existing materials including carbon composites and future developments in automotive material technology which work towards reducing the weight of the vehicle structure. Key features: Chapters written by world-renowned authors and experts in their own fields Includes detailed case studies and examples covering all aspects of composite materials and their application in the automotive industries Unique topic integration between the impact, crash, failure, damage, analysis and modelling of composites Presents the state of the art in composite materials and their application in the automotive industry Integrates theory and practice in the fields of composite materials and automotive engineering Considers energy efficiency and environmental implications Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness is a comprehensive reference for those working with composite materials in both academia and industry, and is also a useful source of information for those considering using composites in automotive applications in the future.

Download or read book Advanced Materials for Future Terahertz Devices Circuits and Systems written by Aritra Acharyya and published by Springer Nature. This book was released on 2021-02-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the properties of advanced materials suitable for realizing THz devices, circuits and systems, and processing and fabrication technologies associated with those. It also discusses some measurement techniques exclusively effective for THz regime, newly explored materials and recently developed solid-state devices for efficient generation and detection of THz waves, potentiality of metamaterials for implementing THz passive circuits and bio-sensors, and finally the future of silicon as the base material of THz devices. The book especially focuses on the recent advancements and several research issues related to THz materials and devices; it also discusses theoretical, experimental, established, and validated empirical works on these topics.

Download or read book Advanced Materials Polymers and Composites written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2021-11-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews several domains of polymer science, especially new trends in polymerization synthesis, physical-chemical properties, and inorganic systems. Composites and nanocomposites are also covered in this book, emphasizing nanotechnologies and their impact on the enhancement of physical and mechanical properties of these new materials. Kinetics and simulation are discussed and also considered as promising techniques for achieving chemistry and predicting physical property goals. This book presents a selection of interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research.

Download or read book Advanced Materials and Design for Electromagnetic Interference Shielding written by Xingcun Colin Tong and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: With electromagnetic compliance (EMC) now a major factor in the design of all electronic products, it is crucial to understand how electromagnetic interference (EMI) shielding products are used in various industries. Focusing on the practicalities of this area, Advanced Materials and Design for Electromagnetic Interference Shielding comprehensively

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Advanced Materials Sourcebook written by Jon Binner and published by . This book was released on 1990 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials Science and Engineering of Carbon written by Michio Inagaki and published by Butterworth-Heinemann. This book was released on 2013-09-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials are exceptionally diverse in their preparation, structure, texture, and applications. In Advanced Materials Science and Engineering of Carbon, noted carbon scientist Michio Inagaki and his coauthors cover the most recent advances in carbon materials, including new techniques and processes, carbon materials synthesis, and up-to-date descriptions of current carbon-based materials, trends and applications. Beginning with the synthesis and preparation of nanocarbons, carbon nanotubes, and graphenes, the book then reviews recently developed carbonization techniques, such as templating, electrospinning, foaming, stress graphitization, and the formation of glass-like carbon. The last third of the book is devoted to applications, featuring coverage of carbon materials for energy storage, electrochemical capacitors, lithium-ion rechargeable batteries, and adsorptive storage of hydrogen and methane for environmental protection, photocatalysis, spilled oil recovery, and nuclear applications of isotropic high-density graphite.