Download or read book ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE U S DEPARTMENT OF ENERGY OCTOBER 1 2001 THROUGH SEPTEMBER 30 2002 written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: OAK-B135 The General Atomics (GA) Advanced Fusion Technology program seeks to advance the knowledge base needed for next-generation fusion experiments and, ultimately, for an economical and environmentally attractive fusion energy source. To achieve this objective, we carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and we conduct research to develop basic and applied knowledge about these technologies. GA's Advanced Fusion Technology program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. Our technology development activities take full advantage of the GA DIII-D program, the DIII-D facility and the Inertial Confinement Fusion (ICF) program and the ICF Target Fabrication facility. The following sections summarize GA's FY02 work in the areas of Fusion Power Plant Studies (ARIES, Section 2), Inertial Fusion Energy (IFE) Chamber Analysis (Section 3), IFE Target Supply System Development (Section 4), Next Step Fusion Design (Section 5), Advanced Liquid Plasma Facing Surfaces (ALPS, Section 6), Advanced Power Extraction Study (APEX, Section 7), Plasma Interactive Materials (DiMES, Section 8) and RF Technology (Section 9). Our work in these areas continues to address many of the issues that must be resolved for the successful construction and operation of next-generation experiments and, ultimately, the development of safe, reliable, economic fusion power plants.
Download or read book ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE U S DEPARTMENT OF ENERGY OCTOBER 1 1998 THROUGH SEPTEMBER 30 1999 written by and published by . This book was released on 2000 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY written by and published by . This book was released on 2001 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: OAK A271 ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY. The General Atomics (GA) Advanced Fusion Technology Program seeks to advance the knowledge base needed for next-generation fusion experiments, and ultimately for an economical and environmentally attractive fusion energy source. To achieve this objective, they carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic and applied knowledge about these technologies. GA's Advanced Fusion Technology program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. The technology development activities take full advantage of the GA DIII-D program, the DIII-D facility and the Inertial Confinement Fusion (ICF) program and the ICF Target Fabrication facility.
Download or read book Fusion Technology Development written by General Atomics (Firm). Magnetic Fusion Research Program and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Technology Development written by General Atomics (Firm). Magnetic Fusion Research Program and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE U S DEPARTMENT OF ENERGY written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: OAK-B135 The General Atomics (GA) Advanced Fusion Technology program seeks to advance the knowledge base needed for next-generation fusion experiments, and ultimately for an economical and environmentally attractive fusion energy source. To achieve this objective, we carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic and applied knowledge about these technologies. GA's Advanced Fusion Technology program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. The technology development activities take full advantage of the GA DIII-D program, the DIII-D facility, the Inertial Confinement Fusion (ICF) program and the ICF Target Fabrication facility.
Download or read book written by and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Technology Development written by and published by . This book was released on 1999 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall objective of the General Atomics (GA) fusion technology development program is the advancement of the knowledge base needed for next-generation fusion experiments, and ultimately for an economical and environmentally attractive fusion energy source. To achieve this objective, the authors carry out fusion systems design studies to evaluate the technologies and materials needed for next-step experiments and power plants, and they conduct research to develop basic and applied knowledge about these materials and technologies. GA's fusion technology development program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. The technology development activities take full advantage of the current DIII-D program and facility. The following sections summarize GA's FY98 work done in the areas of Fusion Power Plan Design Studies (Section 2), Plasma Interactive Materials (Section 3), Radiation Testing of ITER Magnetic Coil (Section 4), RF Technology (Section 5), Advanced Liquid Plasma Facing Surfaces (Section 6), and Advanced Power Extraction Study (Section 7). The work in these areas continues to address many of the issues that must be resolved for the successful construction and operation of next-generation experiments and, ultimately, the development of safe, reliable, economic fusion power plants.
Download or read book Fusion Research at General Atomics Annual Report October 1 1993 September 30 1994 written by and published by . This book was released on 1995 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: In FY94, the General Atomics (GA) Fusion Group made significant contributions to the technology needs of the controlled fusion power program. The work was supported by the Office of Fusion Energy, Advanced Physics and Technology Division and ITER and Technology Division, of the US Department of Energy. The work is reported in the following sections on Fusion Power Plant Studies, Plasma Interactive Materials, RF Technology, and Diagnostics. Meetings attended and publications are listed in their respective sections. The overall objective of GA's fusion technology research is to develop the technologies necessary for fusion to move successfully from present-day physics experiments to the next-generation fusion reactor experiments, Tokamak Physics Experiment (TPX) and ITER, and ultimately to fusion power plants. To achieve this overall objective, we carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power reactors, and we conduct research to develop basic knowledge about these technologies, including plasma technologies, fusion nuclear technologies, and fusion materials. We continue to be committed to the development of fusion power and its commercialization by US industry.
Download or read book Fusion Technology Development Annual Report October 1 1991 September 30 1992 written by and published by . This book was released on 1993 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper discusses the following research in fusion technology; Development and technology overview; reactor design studies; RF technology; and plasma facing components.
Download or read book Fusion Technology Development Annual Report October 1 1995 September 30 1996 written by and published by . This book was released on 1997 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: In FY96, the General Atomics (GA) Fusion Group made significant contributions to the technology needs of the magnetic fusion program. The work is reported in the following sections on Fusion Power Plant Design Studies (Section 2), Plasma Interactive Materials (Section 3), SiC/SiC Composite Material Development (Section 4), Magnetic Diagnostic Probes (Section 5) and RF Technology (Section 6). Meetings attended and publications are listed in their respective sections. The overall objective of GA's fusion technology research is to develop the technologies necessary for fusion to move successfully from present-day physics experiments to ITER and other next-generation fusion experiments, and ultimately to fusion power plants. To achieve this overall objective, the authors carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic knowledge about these technologies, including plasma technologies, fusion nuclear technologies, and fusion materials. They continue to be committed to the development of fusion power and its commercialization by US industry.
Download or read book Fusion Technology Development Annual Report October 1 1994 September 30 1995 written by and published by . This book was released on 1996 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: In FY95, the General Atomics (GA) Fusion Group made significant contributions to the technology needs of the magnetic fusion program. The work is reported in the following sections on Fusion Power Plant Studies (Section 2), DiMES (Section 3), SiC Composite Studies (Section 4), Magnetic Probe (Section 5) and RF Technology (Section 6). Meetings attended and publications are listed in their respective sections. The overall objective of GA's fusion technology research is to develop the technologies necessary for fusion to move successfully from present-day physics experiments to ITER and other next-generation fusion experiments, and ultimately to fusion power plants. To achieve this overall objective, they carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic knowledge about these technologies, including plasma technologies, fusion nuclear technologies, and fusion materials. They continue to be committed to the development of fusion power and its commercialization by US industry.
Download or read book Congressional Record written by United States. Congress and published by . This book was released on 1952 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Congressional Record is the official record of the proceedings and debates of the United States Congress. It is published daily when Congress is in session. The Congressional Record began publication in 1873. Debates for sessions prior to 1873 are recorded in The Debates and Proceedings in the Congress of the United States (1789-1824), the Register of Debates in Congress (1824-1837), and the Congressional Globe (1833-1873)
Download or read book Fusion Technology Development Annual Report October 1 1990 September 30 1991 written by and published by . This book was released on 1992 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report discusses: development and technology overview; reactor design studies; RF technology; fusion nuclear technologies; and, plasma facing components.
Download or read book Bringing Fusion to the U S Grid written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.
Download or read book Nuclear Fusion Energy Encyclopedia Volume 2 ITER Project Burning Plasma American and International Fusion Research Facilities Spinoffs FESAC Reports Toroidal Magnetic Fusion written by Department of Energy (DOE) and published by . This book was released on 2017-06-03 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compilation of official information provides an incredibly comprehensive overview of all aspects of the worlds' quest for nuclear fusion energy, including the ambitious ITER experimental burning plasma project, U.S. fusion research and facilities, international efforts in China, Russia, South Korea, and other countries, and plans for the DEMO reactor and full-scale electrical generation plants. Because of the enormous size of this material, for reproduction in paperback format it has been divided into two parts.VOLUME 1 - Part 1: DOE Fusion Energy Sciences * Part 2: ITER Project Overview and U.S. Contribution * Part 3: The Next Generation of Fusion Energy Research (Hearing) * Part 4: Fusion Energy (GAO) * Part 5: Fusion Spinoffs: Making A Difference Today * Part 6: Report of the FESAC Subcommittee on the Priorities of the Magnetic Fusion Energy Science Program 2013 * Part 7: Report of the FESAC Subcommittee on the Prioritization of Proposed Scientific User Facilities for the Office of Science 2013 * Part 8: Fusion Energy Sciences Advisory Committee Report on Opportunities for and Modes of International Collaboration in Fusion Energy Sciences Research during the ITER Era - February 2012 * Part 9: Fusion Energy Sciences Advisory Committee Report on Opportunities for Fusion Materials Science and Technology Research Now and During the ITER Era February 2012 * Part 10: Report of the Burning Plasma Organization Panel on Planning for US Participation in ITER - September 3, 2009 * Part 11: Priorities, Gaps and Opportunities: Towards A Long-Range Strategic Plan For Magnetic Fusion Energy - A Report to the Fusion Energy Sciences Advisory Committee - October 2007VOLUME 2 - Part 11: Priorities, Gaps and Opportunities: Towards A Long-Range Strategic Plan For Magnetic Fusion Energy - A Report to the Fusion Energy Sciences Advisory Committee - October 2007 (conclusion) * Part 12: Report of the 2005 FESAC Facilities Panel - Characteristics and Contributions of the Three Major United States Toroidal Magnetic Fusion Facilities * Part 13: FESAC A Plan for the Development of Fusion Energy * Part 14: Report of the Fusion Energy Sciences Advisory Committee Burning Plasma Strategy Panel - A Burning Plasma Program Strategy To Advance Fusion Energy * Part 15: NSTX-U FY2013 Year End Report * Part 16: Fusion Energy Sciences Advisory Committee (FESAC) Meeting Minutes * Part 17: 2014 Fusion Energy Sciences Congressional Budget Request * Part 18: 2013 Fusion Energy Sciences Congressional Budget Request * Part 19: ITER Presentations
