Download or read book Advanced Design and Manufacture to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industry has been one of the key drivers for recent rapid global economic development. Globalisation of manufacturing industries due to distributed design and labour advantage leads to a drive and thirst for technological advancements and expertise in the fields of advanced design and manufacturing. This development results in many economical benefits to and improvement of quality of life for many people all over the world. This rapid development also creates many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. More and more design and manufacture tasks can now be undertaken within computer environment using simulation and virtual reality technologies. These technological advancements hence support more advanced product development and manufacturing operations in such a global design and manufacturing environment. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture.

Download or read book Advanced Design and Manufacture to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer. This book was released on 2010-12-14 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industry has been one of the key drivers for recent rapid global economic development. Globalisation of manufacturing industries due to distributed design and labour advantage leads to a drive and thirst for technological advancements and expertise in the fields of advanced design and manufacturing. This development results in many economical benefits to and improvement of quality of life for many people all over the world. This rapid development also creates many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. More and more design and manufacture tasks can now be undertaken within computer environment using simulation and virtual reality technologies. These technological advancements hence support more advanced product development and manufacturing operations in such a global design and manufacturing environment. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture.

Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.

Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer. This book was released on 2010-12-14 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.

Download or read book The Competitive Edge written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain competitiveness in the emerging global economy, U.S. manufacturing must rise to new standards of product quality, responsiveness to customers, and process flexibility. This volume presents a concise and well-organized analysis of new research directions to achieve these goals. Five critical areas receive in-depth analysis of present practices, needed improvement, and research priorities: Advanced engineered materials that offer the prospect of better life-cycle performance and other gains. Equipment reliability and maintenance practices for better returns on capital investment. Rapid product realization techniques to speed delivery to the marketplace. Intelligent manufacturing control for improved reliability and greater precision. Building a workforce with the multidisciplinary skills needed for competitiveness. This sound and accessible analysis will be useful to manufacturing engineers and researchers, business executives, and economic and policy analysts.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.

Download or read book Improving Engineering Design written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective design and manufacturing, both of which are necessary to produce high-quality products, are closely related. However, effective design is a prerequisite for effective manufacturing. This new book explores the status of engineering design practice, education, and research in the United States and recommends ways to improve design to increase U.S. industry's competitiveness in world markets.

Download or read book Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes written by Jan C. Aurich and published by Springer Nature. This book was released on 2023-07-10 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis. The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available. This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer Science & Business Media. This book was released on 2010-10-21 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market demand for skills, knowledge and adaptability have positioned robotics to be an important field in both engineering and science. One of the most highly visible applications of robotics has been the robotic automation of many industrial tasks in factories. In the future, a new era will come in which we will see a greater success for robotics in non-industrial environments. In order to anticipate a wider deployment of intelligent and autonomous robots for tasks such as manufacturing, healthcare, ent- tainment, search and rescue, surveillance, exploration, and security missions, it is essential to push the frontier of robotics into a new dimension, one in which motion and intelligence play equally important roles. The 2010 International Conference on Intelligent Robotics and Applications (ICIRA 2010) was held in Shanghai, China, November 10–12, 2010. The theme of the c- ference was “Robotics Harmonizing Life,” a theme that reflects the ever-growing interest in research, development and applications in the dynamic and exciting areas of intelligent robotics. These volumes of Springer’s Lecture Notes in Artificial Intel- gence and Lecture Notes in Computer Science contain 140 high-quality papers, which were selected at least for the papers in general sessions, with a 62% acceptance rate Traditionally, ICIRA 2010 holds a series of plenary talks, and we were fortunate to have two such keynote speakers who shared their expertise with us in diverse topic areas spanning the rang of intelligent robotics and application activities.

Download or read book Residual Stress Thermomechanics Infrared Imaging and Inverse Problems Volume 6 written by Antonio Baldi and published by Springer Nature. This book was released on 2020-01-22 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 6 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Test Design and Inverse Method Algorithms Inverse Problems: Virtual Fields Method Residual Stresses: Measurement, Uncertainty & Validation Residual Stresses: Eigenvalues, Modeling, & Crack Growth Material Characterizations Using Thermography Fatigue, Damage & Fracture Evaluation Using Infrared Thermography

Download or read book Challenges in Mechanics of Biological Systems and Materials Thermomechanics and Infrared Imaging Time Dependent Materials and Residual Stress Volume 2 written by Christian Franck and published by Springer Nature. This book was released on with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrating Design and Manufacturing for Competitive Advantage written by Gerald I. Susman and published by Oxford University Press. This book was released on 1992-10-15 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more emphasis being placed on the cost and quality of new products and on reducing the lead time to develop them, attention is turning to the increasingly important topic of design for manufacturing (DFM). This involves the collaboration among research and development, manufacturing, and other company functions and is aimed at accelerating the new product development process from product conception to market introduction. A company can create a competitive advantage for itself by managing the process and its related organizational dynamics effectively. This collection of essays focuses on the development of strategic capabilities through use of DFM tools and practices, the role of DFM in specific product development phases, and the social, political, and cultural context within which DFM is introduced.

Download or read book International Conference on Manufacturing Automation written by X. Y. Shao and published by John Wiley & Sons. This book was released on 2004-12-27 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the fourth ICMA in 2004 represent a huge contribution to research in this area. Everyone attending the conference was asked to submit their papers electronically which meant that 100 top quality papers from no less that 10 different countries contributed to the theme of the conference.

Download or read book Handbook on Advanced Design and Manufacturing Technologies for Biomedical Devices written by Andrés Díaz Lantada and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​The last decades have seen remarkable advances in computer‐aided design, engineering and manufacturing technologies, multi‐variable simulation tools, medical imaging, biomimetic design, rapid prototyping, micro and nanomanufacturing methods and information management resources, all of which provide new horizons for the Biomedical Engineering fields and the Medical Device Industry. Advanced Design and Manufacturing Technologies for Biomedical Devices covers such topics in depth, with an applied perspective and providing several case studies that help to analyze and understand the key factors of the different stages linked to the development of a novel biomedical device, from the conceptual and design steps, to the prototyping and industrialization phases. Main research challenges and future potentials are also discussed, taking into account relevant social demands and a growing market already exceeding billions of dollars. In time, advanced biomedical devices will decisively change methods and results in the medical world, dramatically improving diagnoses and therapies for all kinds of pathologies. But if these biodevices are to fulfill present expectations, today’s engineers need a thorough grounding in related simulation, design and manufacturing technologies, and collaboration between experts of different areas has to be promoted, as is also analyzed within this handbook.

Download or read book Integrating Design and Manufacturing for Competitive Advantage written by Gerald I. Susman and published by Oxford University Press, USA. This book was released on 1992 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more emphasis being placed on the cost and quality of new products and on reducing the lead time to develop them, attention is turning to the increasingly important topic of design for manufacturing (DFM). This involves the collaboration among research and development, manufacturing, and other company functions and is aimed at accelerating the new product development process from product conception to market introduction. A company can create a competitive advantage for itself by managing the process and its related organizational dynamics effectively. This collection of essays focuses on the development of strategic capabilities through use of DFM tools and practices, the role of DFM in specific product development phases, and the social, political, and cultural context within which DFM is introduced.

Download or read book Design of Advanced Manufacturing Systems written by Andrea Matta and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since manufacturing has acquired industrial relevance, the problem of adequately sizing manufacturing plants has always been discussed and has represented a di?cult problem for the enterprises, which prepare strategic plans to competitively operate in the market. Manufact- ing capacity is quite expensive and its exploitation and planning must be carefully designed in order to avoid large wastes, or to preserve the survival of enterprises in the market. Indeed a good choice of ma- facturing capacity can result in improved performance in terms of cost, innovativeness, ?exibility, quality and service delivery. Unfortunately the capacity planning problem is not easy to solve because of the lack of clarity in the decisional process, the large number of variables involved, the high correlation among variables and the high level of uncertainty that inevitably a?ects decisions. The aim of this book is to provide a framework and speci?c methods and tools for the selection and con?guration of capacity of Advanced Manufacturing Systems (AMS). In particular this book de?nes an - chitecture where the multidisciplinary aspects of the designofAMSare properly organized and addressed. The tool will support the decisi- maker in the de?nition of the con?guration of the system which is best suited for the particular competitive context where the ?rm operates or wants tooperate. Thisbookisofinterest for academic researchers in the ?eldofind- trial engineering and particularly indicated in the areas of operations and manufacturing strategy.

Download or read book Designing for the 21st Century written by Tom Inns and published by Gower Publishing, Ltd.. This book was released on 2010 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume describes Phase 2 of the UK's research council supported Initiative to capitalise on the potential that a design approach might bring to innovation in business and society