Download or read book Advanced Computational Methods in Life System Modeling and Simulation written by Minrui Fei and published by Springer. This book was released on 2017-09-01 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 761, CCIS 762, and CCIS 763 constitutes the thoroughly refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2017, and of the International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2017, held in Nanjing, China, in September 2017. The 208 revised full papers presented were carefully reviewed and selected from over 625 submissions. The papers of this volume are organized in topical sections on: Biomedical Signal Processing; Computational Methods in Organism Modeling; Medical Apparatus and Clinical Applications; Bionics Control Methods, Algorithms and Apparatus; Modeling and Simulation of Life Systems; Data Driven Analysis; Image and Video Processing; Advanced Fuzzy and Neural Network Theory and Algorithms; Advanced Evolutionary Methods and Applications; Advanced Machine Learning Methods and Applications; Intelligent Modeling, Monitoring, and Control of Complex Nonlinear Systems; Advanced Methods for Networked Systems; Control and Analysis of Transportation Systems; Advanced Sliding Mode Control and Applications; Advanced Analysis of New Materials and Devices; Computational Intelligence in Utilization of Clean and Renewable Energy Resources; Intelligent Methods for Energy Saving and Pollution Reduction; Intelligent Methods in Developing Electric Vehicles, Engines and Equipment; Intelligent Computing and Control in Power Systems; Modeling, Simulation and Control in Smart Grid and Microgrid; Optimization Methods; Computational Methods for Sustainable Environment.

Download or read book Advanced Computational Methods in Energy Power Electric Vehicles and Their Integration written by Kang Li and published by Springer. This book was released on 2017-09-01 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 761, CCIS 762, and CCIS 763 constitutes the thoroughly refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2017, and of the International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2017, held in Nanjing, China, in September 2017. The 208 revised full papers presented were carefully reviewed and selected from over 625 submissions. The papers of this volume are organized in topical sections on: Biomedical Signal Processing; Computational Methods in Organism Modeling; Medical Apparatus and Clinical Applications; Bionics Control Methods, Algorithms and Apparatus; Modeling and Simulation of Life Systems; Data Driven Analysis; Image and Video Processing; Advanced Fuzzy and Neural Network Theory and Algorithms; Advanced Evolutionary Methods and Applications; Advanced Machine Learning Methods and Applications; Intelligent Modeling, Monitoring, and Control of Complex Nonlinear Systems; Advanced Methods for Networked Systems; Control and Analysis of Transportation Systems; Advanced Sliding Mode Control and Applications; Advanced Analysis of New Materials and Devices; Computational Intelligence in Utilization of Clean and Renewable Energy Resources; Intelligent Methods for Energy Saving and Pollution Reduction; Intelligent Methods in Developing Electric Vehicles, Engines and Equipment; Intelligent Computing and Control in Power Systems; Modeling, Simulation and Control in Smart Grid and Microgrid; Optimization Methods; Computational Methods for Sustainable Environment.

Download or read book Life System Modeling and Simulation written by Shiwei Ma and published by Springer. This book was released on 2014-10-01 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the first part of the refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2014, and of the International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2014, held in Shanghai, China, in September 2014. The 159 revised full papers presented in the three volumes of CCIS 461-463 were carefully reviewed and selected from 572 submissions. The papers of this volume are organized in topical sections on biomedical signal processing, imaging, and visualization; computational methods and intelligence in modeling genetic and chemical networks and regulation; computational methods and intelligence in organism modeling; computational methods and intelligence in modeling and design of synthetic biological systems; computational methods and intelligence in biomechanical systems, tissue engineering and clinical bioengineering; intelligent medical apparatus and clinical applications; modeling and simulation of societies and collective behaviour; innovative education in systems modeling and simulation; data analysis and data mining of biosignals; feature selection; robust optimization and data analysis.

Download or read book Life System Modeling and Intelligent Computing written by Minrui Fei and published by Springer Science & Business Media. This book was released on 2010-09 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part I of a two-volume work that contains the refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2010 and the International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2010, held in Wuxi, China, in September 2010. The 194 revised full papers presented were carefully reviewed and selected from over 880 submissions and recommended for publication by Springer in two volumes of Lecture Notes in Computer Science (LNCS) and one volume of Lecture Notes in Bioinformatics (LNBI). This particular volume of Lecture Notes in Computer Science (LNCS) includes 55 papers covering 7 relevant topics. The 55 papers in this volume are organized in topical sections on intelligent modeling, monitoring, and control of complex nonlinear systems; autonomy-oriented computing and intelligent agents; advanced theory and methodology in fuzzy systems and soft computing; computational intelligence in utilization of clean and renewable energy resources; intelligent modeling, control and supervision for energy saving and pollution reduction; intelligent methods in developing vehicles, engines and equipments; computational methods and intelligence in modeling genetic and biochemical networks and regulation.

Download or read book Life System Modeling and Simulation written by Minrui Fei and published by Springer Science & Business Media. This book was released on 2007-08-30 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that constitutes the refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2007, held in Shanghai, China, September 2007. Coverage includes modeling and simulation of societies and collective behavior, computational methods and intelligence in biomechanical systems, tissue engineering and clinical bioengineering, computational intelligence in bioinformatics and biometrics, and brain stimulation.

Download or read book Intelligent Computing Networked Control and Their Engineering Applications written by Dong Yue and published by Springer. This book was released on 2017-09-01 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set CCIS 761, CCIS 762, and CCIS 763 constitutes the thoroughly refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2017, and of the International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2017, held in Nanjing, China, in September 2017. The 208 revised full papers presented were carefully reviewed and selected from over 625 submissions. The papers of this volume are organized in topical sections on: Biomedical Signal Processing; Computational Methods in Organism Modeling; Medical Apparatus and Clinical Applications; Bionics Control Methods, Algorithms and Apparatus; Modeling and Simulation of Life Systems; Data Driven Analysis; Image and Video Processing; Advanced Fuzzy and Neural Network Theory and Algorithms; Advanced Evolutionary Methods and Applications; Advanced Machine Learning Methods and Applications; Intelligent Modeling, Monitoring, and Control of Complex Nonlinear Systems; Advanced Methods for Networked Systems; Control and Analysis of Transportation Systems; Advanced Sliding Mode Control and Applications; Advanced Analysis of New Materials and Devices; Computational Intelligence in Utilization of Clean and Renewable Energy Resources; Intelligent Methods for Energy Saving and Pollution Reduction; Intelligent Methods in Developing Electric Vehicles, Engines and Equipment; Intelligent Computing and Control in Power Systems; Modeling, Simulation and Control in Smart Grid and Microgrid; Optimization Methods; Computational Methods for Sustainable Environment.

Download or read book Intelligent Life System Modelling Image Processing and Analysis written by Minrui Fei and published by Springer Nature. This book was released on 2021-10-21 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set CCIS 1467, CCIS 1468, and CCIS 1469 constitutes the thoroughly refereed proceedings of the 7th International Conference on Life System Modeling and Simulation, LSMS 2021, and of the 7th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2021, held in Hangzhou, China, in October 2021. The 159 revised papers presented were carefully reviewed and selected from over 430 submissions. The papers of this volume are organized in topical sections on: Medical Imaging and Analysis Using Intelligence Computing; Biomedical signal processing, imaging, visualization and surgical robotics; Computational method in taxonomy study and neural dynamics; Intelligent medical apparatus, clinical applications and intelligent design of biochips; Power and Energy Systems; Computational Intelligence in Utilization of Clean and Renewable Energy Resources, and Intelligent Modelling, Control and Supervision for Energy Saving and Pollution Reduction; Intelligent Methods in Developing Electric Vehicles, Engines and Equipment; Intelligent Control Methods in Energy Infrastructure Development and Distributed Power Generation Systems; Intelligent Modeling, Simulation and Control of Power Electronics and Power Networks; Intelligent Techniques for Sustainable Energy and Green Built Environment, Water Treatment and Waste Management; Intelligent Robot and Simulation; Intelligent Data Processing, Analysis and Control in Complex Systems; Advanced Neural Network Theory and Algorithms; Advanced Computational Methods and Applications; Fuzzy, Neural, and Fuzzy-neuro Hybrids; Intelligent Modelling, Monitoring, and Control of Complex Nonlinear Systems; Intelligent manufacturing, autonomous systems, intelligent robotic systems; Computational Intelligence and Applications.

Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.

Download or read book Bio Inspired Computational Intelligence and Applications written by Minrui Fei and published by Springer. This book was released on 2007-08-26 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that constitutes the refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2007, held in Shanghai, China, September 2007. Coverage includes advanced neural network theory, advanced evolutionary computing theory, ant colonies and particle swarm optimization, intelligent modeling, monitoring, and control of complex nonlinear systems, as well as biomedical signal processing, imaging and visualization.

Download or read book Life System Modeling and Intelligent Computing written by Minrui Fei and published by Springer Science & Business Media. This book was released on 2010-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part II of a two-volume work that contains the refereed proceedings of the International Conference on Life System Modeling and Simulation, LSMS 2010 and the International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2010, held in Wuxi, China, in September 2010. The 194 revised full papers presented were carefully reviewed and selected from over 880 submissions and recommended for publication by Springer in two volumes of Lecture Notes in Computer Science (LNCS) and one volume of Lecture Notes in Bioinformatics (LNBI). This particular volume of Lecture Notes in Computer Science (LNCS) includes 55 papers covering 7 relevant topics. The 56 papers in this volume are organized in topical sections on advanced evolutionary computing theory and algorithms; advanced neural network and fuzzy system theory and algorithms; modeling and simulation of societies and collective behavior; biomedical signal processing, imaging, and visualization; intelligent computing and control in distributed power generation systems; intelligent methods in power and energy infrastructure development; intelligent modeling, monitoring, and control of complex nonlinear systems.

Download or read book Life System Modeling and Intelligent Computing written by Kang Li and published by Springer Science & Business Media. This book was released on 2010-09-02 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2010 International Conference on Life System Modeling and Simulation (LSMS 2010) and the 2010 International Conference on Intelligent Computing for Sustainable Energy and Environment (ICSEE 2010) were formed to bring together researchers and practitioners in the fields of life system modeling/simulation and intelligent computing applied to worldwide sustainable energy and environmental applications. A life system is a broad concept, covering both micro and macro components ra- ing from cells, tissues and organs across to organisms and ecological niches. To c- prehend and predict the complex behavior of even a simple life system can be - tremely difficult using conventional approaches. To meet this challenge, a variety of new theories and methodologies have emerged in recent years on life system modeling and simulation. Along with improved understanding of the behavior of biological systems, novel intelligent computing paradigms and techniques have emerged to h- dle complicated real-world problems and applications. In particular, intelligent c- puting approaches have been valuable in the design and development of systems and facilities for achieving sustainable energy and a sustainable environment, the two most challenging issues currently facing humanity. The two LSMS 2010 and ICSEE 2010 conferences served as an important platform for synergizing these two research streams.

Download or read book Intelligent Life System Modelling Image Processing and Analysis written by Minrui Fei and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set CCIS 1467, CCIS 1468, and CCIS 1469 constitutes the thoroughly refereed proceedings of the 7th International Conference on Life System Modeling and Simulation, LSMS 2021, and of the 7th International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2021, held in Hangzhou, China, in October 2021. The 159 revised papers presented were carefully reviewed and selected from over 430 submissions. The papers of this volume are organized in topical sections on: Medical Imaging and Analysis Using Intelligence Computing; Biomedical signal processing, imaging, visualization and surgical robotics; Computational method in taxonomy study and neural dynamics; Intelligent medical apparatus, clinical applications and intelligent design of biochips; Power and Energy Systems; Computational Intelligence in Utilization of Clean and Renewable Energy Resources, and Intelligent Modelling, Control and Supervision for Energy Saving and Pollution Reduction; Intelligent Methods in Developing Electric Vehicles, Engines and Equipment; Intelligent Control Methods in Energy Infrastructure Development and Distributed Power Generation Systems; Intelligent Modeling, Simulation and Control of Power Electronics and Power Networks; Intelligent Techniques for Sustainable Energy and Green Built Environment, Water Treatment and Waste Management; Intelligent Robot and Simulation; Intelligent Data Processing, Analysis and Control in Complex Systems; Advanced Neural Network Theory and Algorithms; Advanced Computational Methods and Applications; Fuzzy, Neural, and Fuzzy-neuro Hybrids; Intelligent Modelling, Monitoring, and Control of Complex Nonlinear Systems; Intelligent manufacturing, autonomous systems, intelligent robotic systems; Computational Intelligence and Applications.

Download or read book Computational Techniques in Modeling and Simulation written by Victor Krasnoproshin and published by Nova Science Publishers. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with Computational Techniques in Modeling and Simulation. Initially, there are four research papers and apart from those, the rest of the research papers are coming from the International Conference on Modeling and Simulation (MS2012), held in Minsk, 24 May 2012. MS'12 was co-organised by the AMSE Association and the Belarusian State University in co-operation with other scientific establishments: the Belarusian Academy of Sciences (United Institute of Problems of Informatics), the Belarusian Society of International Association of Pattern Recognition and the International Association for Fuzzy Set Management and Economy (SIGEF, Spain). The Conference was sponsored by the Belarusian State University and Byelex Multimedia Products BV (The Netherlands). It offered a unique opportunity for researchers, professionals and students to share ideas concerning modelling, simulation and implementation of the results in the real world.We would like to thank all contributors, referees, honorary committees for their co-operation within MS'12, in particular: Jaime Gil Aluja (AMSE President), Sergey Ablameyko (the Rector of the Belarusian State University) as honorary chairmen.

Download or read book Advanced Systems Modeling and Simulation written by Anjali Awasthi and published by Elsevier. This book was released on 2022-05-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Systems Modeling and Simulation explains a wide range of concepts, tools, and techniques for advanced systems modeling and simulation. A simulation is a computer model of a system and almost any phenomenon can be analyzed and described as such in order to gain practical insights into how it works. Increases in computing power as well as ongoing developments in the creation and storage of data have brought simulations into a wider range of application areas, adding significant value and also creating a need for information and advice on how to use these tools in new contexts. Starting with fundamental information on modeling and simulation, this book goes on to provide detailed and practical advice on the most relevant modeling and simulation methods, before exploring case studies from applications in other areas, including transportation, supply chain, manufacturing, and healthcare. Explains the fundamentals of systems modeling, helping a wide range of readers engage with these methods. Provides practical advice on decision-making under uncertainty. Features applications and case studies from a range of industries, including manufacturing, supply chain, transport, and healthcare.

Download or read book Advanced Computational Techniques for Heat and Mass Transfer in Food Processing written by Krunal Gangawane and published by CRC Press. This book was released on 2022-02-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational methods have risen as a powerful technique for exploring the system phenomena and solving real-life problems. Currently, there are two principle computational approaches for system analysis: continuous and discrete. In the continuous approach, the governing equations can be obtained by applying the fundamental laws, such as conservation of mass, momentum, and energy over an infinitesimal control volume. On the other hand, the discrete approach concentrates on mimicking the molecular movement within the system. Both approaches have pros and cons, and continuous development and improvement in the existing computational methods are ongoing. Advanced Computational Techniques for Heat and Mass Transfer in Food Processing provides, in a single source, information on the use of methods based on numerical and computational analysis as applied in food science and technology. It explores the use of various numerical/computational techniques for the simulation of fluid flow and heat and mass transfer within food products. Key Features: Explores various numerical techniques used for modeling and validation Describes the knowhow of numerical and computational techniques for food process operations Covers a detailed numerical or computational approach of the principles of heat and mass transfer in the food processing operation Discusses the detailed computational simulation procedure of the food operation Recent years have witnessed a rapid development in the field of computational techniques owing to its abundant benefit to the food processing industry. The relevance of advanced computational methods has helped in understanding the fundamental physics of thermal and hydrodynamic behavior that can provide benefits to the food processing industry in numerous applications. As a single information source for those interested in the use of methods based on numerical and computational analysis as applied in food science and technology, this book will ably serve any food academician or researcher in learning the advanced numerical techniques exploring fluid flow, crystallization, and other food processing operations.

Download or read book Biological Modeling and Simulation written by Russell Schwartz and published by MIT Press. This book was released on 2008-07-25 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practice-oriented survey of techniques for computational modeling and simulation suitable for a broad range of biological problems. There are many excellent computational biology resources now available for learning about methods that have been developed to address specific biological systems, but comparatively little attention has been paid to training aspiring computational biologists to handle new and unanticipated problems. This text is intended to fill that gap by teaching students how to reason about developing formal mathematical models of biological systems that are amenable to computational analysis. It collects in one place a selection of broadly useful models, algorithms, and theoretical analysis tools normally found scattered among many other disciplines. It thereby gives the aspiring student a bag of tricks that will serve him or her well in modeling problems drawn from numerous subfields of biology. These techniques are taught from the perspective of what the practitioner needs to know to use them effectively, supplemented with references for further reading on more advanced use of each method covered. The text, which grew out of a class taught at Carnegie Mellon University, covers models for optimization, simulation and sampling, and parameter tuning. These topics provide a general framework for learning how to formulate mathematical models of biological systems, what techniques are available to work with these models, and how to fit the models to particular systems. Their application is illustrated by many examples drawn from a variety of biological disciplines and several extended case studies that show how the methods described have been applied to real problems in biology.

Download or read book Advances in Computational Modeling and Simulation written by Rallapalli Srinivas and published by Springer Nature. This book was released on 2022-02-15 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents select proceedings of Global meet on ‘Computational Modelling and Simulation, Recent Innovations, Challenges and Perspectives, 2020. This book covers leading-edge technologies from different domains such as computation in optimization and control, multiscale and multiphysics modeling and computation analysis, environmental modeling, modeling approaches to enterprise systems and services, finite element analysis, dependability and security, high-performance computation/cloud computing applications, computational biology and chemistry and computational mechanics. The primary goal of this book is to strengthen pre-eminence in computational modeling and simulation by catalyzing the transformative use of innovative developments in a wide range of disciplines to achieve lasting societal impact. The book discusses on how to perform simulation of large complex dynamic systems in an efficient manner using advanced computational analysis. The inter-disciplinary nature of the book would be a valuable reference for academicians and research scientists, industrialists interested in modelling and simulation driven by computational technology.