Download or read book Advanced Characterization of Crumb Rubber Modified Asphalts Using Protocols Developed for Complex Binders written by Sohee Kim (Research assistant) and published by . This book was released on 2000 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Long and Deep Tunnels written by Vittorio Guglielmetti and published by CRC Press. This book was released on 2016-04-15 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of “long and deep” tunnels, i.e. tunnels under mountains, characterised by either considerable length and/or overburden, represent a considerable challenge. The scope of this book is not to instruct how to design and construct such tunnels but to share a method to identify the potential hazards related to the process of designing and constructing long and deep tunnels, to produce a relevant comprehensive analysis and listing, to quantify the probability and consequences, and to design proper mitigation measures and countermeasures. The design, developed using probabilistic methods, is verified during execution by means of the so called Plan for Advance of the Tunnel (PAT) method, which allows adapting the design and control parameters of the future stretches of the tunnel to the results of the stretches already finished, using the monitoring data base. Numerous criteria are given to identify the key parameters, necessary for the PAT procedure. Best practices of excavation management with the help of real time monitoring and control are also provided. Furthermore cost and time evaluation systems are analysed. Finally, contractual aspects related to construction by contract are investigated, for best development and application of models more appropriate for tunnelling-construction contracts. The work will be of interest to practising engineers, designers, consultants and students in mining, underground, tunnelling, transportation and construction engineering, as well as to foundation and geological engineers, urban planners/developers and architects.
Download or read book Sustainable Waste Management and Recycling written by Mukesh C. Limbachiya and published by Thomas Telford. This book was released on 2004 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Conference organised by the Concrete and Masonry Research Group and held at Kingston University - London at 14-15 September 2004 With the introduction of waste legislation, in the form of regulations and directives, in many parts of the world a significant move towards sustainable waste management is becoming a legal requirement. Emphasisis now being placed on increasing recycling and promoting more sustainable waste management practices, and greater co-ordination between the public, private and independent sectors, and all concerned with the management of waste and reusable materials.
Download or read book Environmental Degradation of Advanced and Traditional Engineering Materials written by Lloyd H. Hihara and published by CRC Press. This book was released on 2013-10-23 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main, ongoing challenges for any engineering enterprise is that systems are built of materials subject to environmental degradation. Whether working with an airframe, integrated circuit, bridge, prosthetic device, or implantable drug-delivery system, understanding the chemical stability of materials remains a key element in determining their useful life. Environmental Degradation of Advanced and Traditional Engineering Materials is a monumental work for the field, providing comprehensive coverage of the environmental impacts on the full breadth of materials used for engineering infrastructure, buildings, machines, and components. The book discusses fundamental degradation processes and presents examples of degradation under various environmental conditions. Each chapter presents the basic properties of the class of material, followed by detailed characteristics of degradation, guidelines on how to protect against corrosion, and a description of testing procedures. A complete, self-contained industrial reference guide, this valuable resource is designed for students and professionals interested in the development of deterioration-resistant technological systems constructed with metallurgical, polymeric, ceramic, and natural materials.
Download or read book Sustainable Construction and Building Materials written by Sayed Hemeda and published by BoD – Books on Demand. This book was released on 2019-03-13 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on recent advances in sustainable construction and building materials with special emphasis on the characterization of natural and composite hydraulic mortars, advanced concrete technology, green building materials, and application of nanotechnology to the improvement of the design of building materials. The book covers in detail the characterization of natural hydraulic lime mortars, a decade of research on self-healing concrete, biocomposite cement binding process and performance, development of sustainable building materials from agro-industrial wastes, applications of sugarcane biomass ash for developing sustainable construction materials, oil-contaminated sand: sources, properties, remediation, and engineering applications, oil shale ash addition effect in concrete to freezing/thawing, connection node design and performance optimization of girders, functionally graded concrete structures, cumulative tensile damage and consolidation effects on fracture properties of sandstone, key performance criteria influencing the selection of construction methods used for the fabrication of building components in the Middle East, fly ash as a resource material for the construction industry, degradation monitoring systems for a building information modeling maintenance approach, durability of composite-modified asphalt mixtures based on inherent and improved performance, and bitumen and its modifiers.
Download or read book Climate Change Energy Sustainability and Pavements written by Kasthurirangan Gopalakrishnan and published by Springer. This book was released on 2014-09-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change, energy production and consumption, and the need to improve the sustainability of all aspects of human activity are key inter-related issues for which solutions must be found and implemented quickly and efficiently. To be successfully implemented, solutions must recognize the rapidly changing socio-techno-political environment and multi-dimensional constraints presented by today’s interconnected world. As part of this global effort, considerations of climate change impacts, energy demands, and incorporation of sustainability concepts have increasing importance in the design, construction, and maintenance of highway and airport pavement systems. To prepare the human capacity to develop and implement these solutions, many educators, policy-makers and practitioners have stressed the paramount importance of formally incorporating sustainability concepts in the civil engineering curriculum to educate and train future civil engineers well-equipped to address our current and future sustainability challenges. This book will prove a valuable resource in the hands of researchers, educators and future engineering leaders, most of whom will be working in multidisciplinary environments to address a host of next-generation sustainable transportation infrastructure challenges. "This book proposes a broad detailed overview of the actual scientific knowledge about pavements linked to climate change, energy and sustainability at the international level in an original multidimensional/multi-effects way. By the end, the reader will be aware of the whole global issues to care about for various pavement technical features around the world, among which the implications of modelling including data collection, challenging resources saving and infrastructures services optimisation. This is a complete and varied work, rare in the domain." Dr. Agnes Jullien Research Director Director of Environmental, Development, Safety and Eco-Design Laboratory (EASE) Department of Development, Mobility and Environment Ifsttar Centre de Nantes Cedex- France “An excellent compilation of latest developments in the field of sustainable pavements. The chapter topics have been carefully chosen and are very well-organized with the intention of equipping the reader with the state-of-the-art knowledge on all aspects of pavement sustainability. Topics covered include pavement Life Cycle Analysis (LCA), pervious pavements, cool pavements, photocatalytic pavements, energy harvesting pavements, etc. which will all be of significant interest to students, researchers, and practitioners of pavement engineering. This book will no doubt serve as an excellent reference on the topic of sustainable pavements.” Dr. Wei-Hsing Huang Editor-in-Chief of International Journal of Pavement Research and Technology (IJPRT) and Professor of Civil Engineering National Central University Taiwan
Download or read book Advanced Testing and Characterization of Bituminous Materials Two Volume Set written by Andreas Loizos and published by CRC Press. This book was released on 2009-05-14 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous materials are used to build durable roads that sustain diverse environmental conditions. However, due to their complexity and a global shortage of these materials, their design and technical development present several challenges. Advanced Testing and Characterisation of Bituminous Materials focuses on fundamental and performance testing
Download or read book Binder Characterization and Evaluation written by David A. Anderson and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Asphalt Materials written by Shin-Che Huang and published by Woodhead Publishing. This book was released on 2015-04-08 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need for infrastructure rehabilitation and maintenance has led to a rise in the levels of research into bituminous materials. Breakthroughs in sustainable and environmentally friendly bituminous materials are certain to have a significant impact on national economies and energy sustainability. This book will provide a comprehensive review on recent advances in research and technological developments in bituminous materials. Opening with an introductory chapter on asphalt materials and a section on the perspective of bituminous binder specifications, Part One covers the physiochemical characterisation and analysis of asphalt materials. Part Two reviews the range of distress (damage) mechanisms in asphalt materials, with chapters covering cracking, deformation, fatigue cracking and healing of asphalt mixtures, as well as moisture damage and the multiscale oxidative aging modelling approach for asphalt concrete. The final section of this book investigates alternative asphalt materials. Chapters within this section review such aspects as alternative binders for asphalt pavements such as bio binders and RAP, paving with asphalt emulsions and aggregate grading optimization. - Provides an insight into advances and techniques for bituminous materials - Comprehensively reviews the physicochemical characteristics of bituminous materials - Investigate asphalt materials on the nano-scale, including how RAP/RAS materials can be recycled and how asphalt materials can self-heal and rejuvenator selection
Download or read book Use of Waste Materials in Hot mix Asphalt written by H. Fred Waller and published by ASTM International. This book was released on 1993 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: In light of requirements that rubber be mixed with any asphalt used in projects receiving federal aid beginning in 1994, and the general increase in the problem of what to do with waste material, 17 papers from a December 1992 symposium in Miami discuss some of the technical and economic considerati
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modified Asphalt written by Jose Luis Rivera Armenta and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt modification is an important area in the development of new road and pavement materials. There is an urgent demand for road materials that can minimize fracture at low temperatures and increase resistance to deformation at high temperatures. The function of asphalt is to bind aggregate to protect it from water and other harmful agents. In the beginning asphalt was ideal for this purpose, but recently traffic loads have increased and environmental factors have deteriorated more rapidly than before. Asphalt is a byproduct of crude oil in the refining process, and it is considered a complex heterogeneous mixture of hydrocarbons. Asphalt modification has become an important research area, using several methods and new materials as modifiers.
Download or read book Proceedings of the 5th International Symposium on Asphalt Pavements Environment APE written by Marco Pasetto and published by Springer Nature. This book was released on 2019-08-29 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Hot mix Asphalt Mixtures written by and published by . This book was released on 1999 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Modified Bitumen written by Tony McNally and published by Elsevier. This book was released on 2011-09-15 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen.After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen.Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. - Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen - Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres - Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels
Download or read book Crumb Rubber Modifier written by and published by . This book was released on 1993 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Section 1038 of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) contains provisions for each State to begin incorporating scrap tire rubber into their asphalt paving materials. A workshop was developed through the cooperation of highway agencies and the asphalt industry to discuss present procedures and practices for designing and constructing asphalt pavements which incorporate scrap tire rubber (crumb rubber modifier). These workshop notes were prepared from the proceedings of the 13 workshop sessions.
Download or read book Modification of Polymers written by Charles E. Carraher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sheer volume of topics which could have been included under our general title prompted us to make some rather arbitrary decisions about content. Modification by irradiation is not included because the activity in this area is being treated elsewhere. We have chosen to emphasize chemical routes to modification and have striven to pre sent as balanced a representation of current activity as time and page count permit. Industrial applications, both real and potential, are included. Where appropriate, we have encouraged the contributors to include review material to help provide the reader with adequate context. The initial chapter is a review from a historical perspective of polymer modification and contains an extensive bibliography. The remainder of the book is divided into four general areas: Reactions and Preparation of Copolymers Reactions and Preparation of Block and Graft Copolymers Modification Through Condensation Reactions Applications The chemical modification of homopolymers such as polyvinylchlo ride, polyethylene, poly(chloroalkylene sulfides), polysulfones, poly chloromethylstyrene, polyisobutylene, polysodium acrylate, polyvinyl alcohol, polyvinyl chloroformate, sulfonated polystyrene; block and graft copolymers such as poly(styrene-block-ethylene-co-butylene block-styrene), poly(I,4-polybutadiene-block ethylene oxide), star chlorine-telechelic polyisobutylene, poly(isobutylene-co-2,3-dimethyl- 1,3-butadiene), poly(styrene-co-N-butylmethacrylate); cellulose, dex tran and inulin, is described.
