Download or read book Model Systems in Catalysis written by Robert Rioux and published by Springer Science & Business Media. This book was released on 2009-11-11 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an excellent compilation of cutting-edge research in heterogeneous catalysis and related disciplines – surface science, organometallic catalysis, and enzymatic catalysis. In 23 chapters by noted experts, the volume demonstrates varied approaches using model systems and their successes in understanding aspects of heterogeneous catalysis, both metal- and metal oxide-based catalysis in extended single crystal and nanostructured catalytic materials. To truly appreciate the astounding advances of modern heterogeneous catalysis, let us first consider the subject from a historical perspective. Heterogeneous catalysis had its beginnings in England and France with the work of scientists such as Humphrey Davy (1778–1829), Michael Faraday (1791–1867), and Paul Sabatier (1854–1941). Sabatier postulated that surface compounds, si- lar to those familiar in bulk to chemists, were the intermediate species leading to catalytic products. Sabatier proposed, for example, that NiH moieties on a Ni sur- 2 face were able to hydrogenate ethylene, whereas NiH was not. In the USA, Irving Langmuir concluded just the opposite, namely, that chemisorbed surface species are chemically bound to surfaces and are unlike known molecules. These chemisorbed species were the active participants in catalysis. The equilibrium between gas-phase molecules and adsorbed chemisorbed species (yielding an adsorption isotherm) produced a monolayer by simple site-filling kinetics.

Download or read book Selective Catalysis for Renewable Feedstocks and Chemicals written by Kenneth M. Nicholas and published by Springer. This book was released on 2014-09-13 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.

Download or read book Hydroformylation for Organic Synthesis written by Maurizio Taddei and published by Springer. This book was released on 2014-07-08 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Metals and Ligands in Organic Hydroformylation, by Luca Gonsalvi, Antonella Guerriero, Eric Monflier, Frédéric Hapiot, Maurizio Peruzzini. Hydroformylation in Aqueous Biphasic Media Assisted by Molecular Receptors, by Frédéric Hapiot, Hervé Bricout, Sébastien Tilloy, Eric Monflier. Asymmetric Hydroformylation, by Bernabé F. Perandones, Cyril Godard, Carmen Claver. Domino Reactions Triggered by Hydroformylation, by Elena Petricci, Elena Cini. Rhodium-Catalyzed Hydroformylation in Fused Azapolycycles Synthesis, by Roberta Settambolo. Hydroformylation in Natural Product Synthesis, by Roderick W. Bates, Sivarajan Kasinathan.

Download or read book Chemical Catalysts for Biomass Upgrading written by Mark Crocker and published by John Wiley & Sons. This book was released on 2020-03-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference to the use of innovative catalysts and processes to turn biomass into value-added chemicals Chemical Catalysts for Biomass Upgrading offers detailed descriptions of catalysts and catalytic processes employed in the synthesis of chemicals and fuels from the most abundant and important biomass types. The contributors?noted experts on the topic?focus on the application of catalysts to the pyrolysis of whole biomass and to the upgrading of bio-oils. The authors discuss catalytic approaches to the processing of biomass-derived oxygenates, as exemplified by sugars, via reactions such as reforming, hydrogenation, oxidation, and condensation reactions. Additionally, the book provides an overview of catalysts for lignin valorization via oxidative and reductive methods and considers the conversion of fats and oils to fuels and terminal olefins by means of esterification/transesterification, hydrodeoxygenation, and decarboxylation/decarbonylation processes. The authors also provide an overview of conversion processes based on terpenes and chitin, two emerging feedstocks with a rich chemistry, and summarize some of the emerging trends in the field. This important book: -Provides a comprehensive review of innovative catalysts, catalytic processes, and catalyst design -Offers a guide to one of the most promising ways to find useful alternatives for fossil fuel resources -Includes information on the most abundant and important types of biomass feedstocks -Examines fields such as catalytic cracking, pyrolysis, depolymerization, and many more Written for catalytic chemists, process engineers, environmental chemists, bioengineers, organic chemists, and polymer chemists, Chemical Catalysts for Biomass Upgrading presents deep insights on the most important aspects of biomass upgrading and their various types.

Download or read book Selectivity in Catalysis written by Mark E. Davis and published by . This book was released on 1993 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses recent research and provides tutorial chapters on enhancing selectivity in catalysis through stereoselectivity, reaction pathway control, shape selectivity, and alloys and clusters. Presents an interdisciplinary approach to increasing selectivity in homogeneous and heterogeneous catalysis research. Includes an overview chapter that discusses the current state of the field and offers a perspective on future directions.

Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.

Download or read book Catalytic Hydrogenation written by L. Cervený and published by Elsevier. This book was released on 1986-08-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of contributions in this volume presents the most up-to-date findings in catalytic hydrogenation. The individual chapters have been written by 36 top specialists each of whom has achieved a remarkable depth of coverage when dealing with his particular topic. In addition to detailed treatment of the most recent problems connected with catalytic hydrogenations, the book also contains a number of previously unpublished results obtained either by the authors themselves or within the organizations to which they are affiliated.Because of its topical and original character, the book provides a wealth of information which will be invaluable not only to researchers and technicians dealing with hydrogenation, but also to all those concerned with homogeneous and heterogeneous catalysis, organic technology, petrochemistry and chemical engineering.

Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: - Catalytic pyrolysis of lignocellulosic biomass - Hybrid biogasoline by co-processing in FCC units - Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) - Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. - Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes - Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process - Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature

Download or read book Side Reactions in Organic Synthesis written by Florencio Zaragoza Dörwald and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most syntheses in the chemical research laboratory fail and usually require several attempts before proceeding satisfactorily. Failed syntheses are not only discouraging and frustrating, but also cost a lot of time and money. Many failures may, however, be avoided by understanding the structure-reactivity relationship of organic compounds. This textbook highlights the competing processes and limitations of the most important reactions used in organic synthesis. By allowing chemists to quickly recognize potential problems this book will help to improve their efficiency and success-rate. A must for every graduate student but also for every chemist in industry and academia. Contents: 1 Organic Synthesis: General Remarks 2 Stereoelectronic Effects and Reactivity 3 The Stability of Organic Compounds 4 Aliphatic Nucleophilic Substitutions: Problematic Electrophiles 5 The Alkylation of Carbanions 6 The Alkylation of Heteroatoms 7 The Acylation of Heteroatoms 8 Palladium-Catalyzed C-C Bond Formation 9 Cyclizations 10 Monofunctionalization of Symmetric Difunctional Substrates

Download or read book Metal Nanoparticles in Microbiology written by Mahendra Rai and published by Springer Science & Business Media. This book was released on 2011-04-02 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following an introduction to biogenic metal nanoparticles, this book presents how they can be biosynthesized using bacteria, fungi and yeast, as well as their potential applications in biomedicine. It is shown that the synthesis of nanoparticles using microbes is eco-friendly and results in reproducible metal nanoparticles of well-defined sizes, shapes and structures. This biotechnological approach based on the process of biomineralization exploits the effectiveness and flexibility of biological systems. Chapters include practical protocols for microbial synthesis of nanoparticles and microbial screening methods for isolating a specific nanoparticle producer as well as reviews on process optimization, industrial scale production, biomolecule-nanoparticle interactions, magnetosomes, silver nanoparticles and their numerous applications in medicine, and the application of gold nanoparticles in developing sensitive biosensors.

Download or read book Carbon Materials for Catalysis written by Philippe Serp and published by John Wiley & Sons. This book was released on 2009-02-04 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book covering all aspects of the use of carbonaceous materials in heterogeneous catalysis. It covers the preparation and characterization of carbon supports and carbon-supported catalysts; carbon surface chemistry in catalysis; the description of catalytic, photo-catalytic, or electro-catalytic reactions, including the development of new carbon materials such as carbon xerogels, aerogels, or carbon nanotubes; and new carbon-based materials in catalytic or adsorption processes. This is a premier reference for carbon, inorganic, and physical chemists, materials scientists and engineers, chemical engineers, and others.

Download or read book Fundamental Concepts in Heterogeneous Catalysis written by Jens K. Nørskov and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a graduate course and suitable as a primer for any newcomer to the field, this book is a detailed introduction to the experimental and computational methods that are used to study how solid surfaces act as catalysts. Features include: First comprehensive description of modern theory of heterogeneous catalysis Basis for understanding and designing experiments in the field Allows reader to understand catalyst design principles Introduction to important elements of energy transformation technology Test driven at Stanford University over several semesters

Download or read book Microwave Assisted Organic Synthesis written by Jason Tierney and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first reports on the application of microwaves in organicsynthesis date back to 1986, but it was not until the recentintroduction of specifically designed and constructed equipment,which countered the safety and reproducibility concerns, thatsynthetic application of microwaves has become established as alaboratory technique. Microwave assisted synthesis is now beingadopted in many industrial and academic laboratories to takeadvantage of the novel chemistry that can be carried out using avariety of organic reaction types. This book demonstrates the underlying principles of microwavedielectric heating and, by reference to a range of organic reactiontypes, it's effective use in synthetic organic chemistry. Toillustrate the impact microwave assisted organic synthesis can haveon chemical research, case studies drawn mainly from thepharmaceutical industry are presented.

Download or read book The Activation of Dioxygen and Homogeneous Catalytic Oxidation written by D.H.R. Barton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of the proceedings of the Fifth International Symposium on the Activation of Dioxygen and Homogeneous Catalytic Oxidation, held in College Station, Texas, March 14-19, 1993. It contains an introductory chapter authored by Professors D. H. R. Barton and D. T. Sawyer, and twenty-nine chapters describing presentations by the plenary lecturers and invited speakers. One of the invited speakers, who could not submit a manuscript for reasons beyond his control, is represented by an abstract of his lecture. Also included are abstracts of forty-seven posters contributed by participants in the symposium. Readers who may wish to know more about the subjects presented in abstract form are invited to communicate directly with the authors of the abstracts. This is the fifth international symposium that has been held on this subject. The first was hosted by the CNRS, May 21-29, 1979, in Bendor, France (on the Island of Bandol). The second meeting was organized as a NATO workshop in Padova, Italy, June 24-27, 1984. This was followed by a meeting in Tsukuba, Japan, July 12-16, 1987. The fourth symposium was held at Balatonfured, Hungary, September 10-14, 1990. The sixth meeting is scheduled to take place in Delft, The Netherlands (late Spring, 1996); the organizer and host will be Professor R. A. Sheldon.

Download or read book Zeolite Characterization and Catalysis written by Arthur W. Chester and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for putting together a tutorial on zeolites came originally from my co-editor, Eric Derouane, about 5 years ago. I ?rst met Eric in the mid-1980s when he spent 2 years working for Mobil R&D at our then Corporate lab at Princeton, NJ. He was on the senior technical staff with projects in the synthesis and characterization of new materials. At that time, I managed a group at our Paulsboro lab that was responsible for catalyst characterization in support of our catalyst and process development efforts, and also had a substantial group working on new material synthesis. Hence, our interests overlapped considerably and we met regularly. After Eric moved back to Namur (initially), we maintained contact, and in the 1990s, we met a number of times in Europe on projects of joint interest. It was after I retired from ExxonMobil in 2002 that we began to discuss the tutorial concept seriously. Eric had (semi-)retired and lived on the Algarve, the southern coast of Portugal. In January 2003, my wife and I spent 3 weeks outside of Lagos, and I worked parts of most days with Eric on the proposed content of the book. We decided on a comprehensive approach that ultimately amounted to some 20+ chapters covering all of zeolite chemistry and catalysis and gave it the title Zeolite Chemistry and Catalysis: An integrated Approach and Tutorial.

Download or read book Preparation of Solid Catalysts written by Gerhard Ertl and published by John Wiley & Sons. This book was released on 2008-08-29 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid catalysts play a fundamental role in all areas between basic research and industrial applications. This book offers a large amount of information about the preparation of solid catalysts. All types of solid catalysts and all important aspects of their preparation are discussed. The highly topical contributions are written by leading experts in disciplines ranging from solid state, interface and solution chemistry to industrial engineering. The straightforward presentation of the material and the comprehensive coverage make this book an essential and indispensible tool for every scientist and engineer working with solid catalysts.

Download or read book Industrial Catalysis written by Jens Hagen and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in it's 3rd Edition, Industrial Catalysis offers all relevant information on catalytic processes in industry, including many recent examples. Perfectly suited for self-study, it is the ideal companion for scientists who want to get into the field or refresh existing knowledge. The updated edition covers the full range of industrial aspects, from catalyst development and testing to process examples and catalyst recycling. The book is characterized by its practical relevance, expressed by a selection of over 40 examples of catalytic processes in industry. In addition, new chapters on catalytic processes with renewable materials and polymerization catalysis have been included. Existing chapters have been carefully revised and supported by new subchapters, for example, on metathesis reactions, refinery processes, petrochemistry and new reactor concepts. "I found the book accesible, readable and interesting - both as a refresher and as an introduction to new topics - and a convenient first reference on current industrial catalytic practise and processes." Excerpt from a book review for the second edition by P. C. H. Mitchell, Applied Organometallic Chemistry (2007)