Download or read book Kinetics of Catalytic Reactions written by M. Albert Vannice and published by Springer Science & Business Media. This book was released on 2006-04-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes how to conduct kinetic experiments with heterogeneous catalysts, analyze and model the results, and characterize the catalysts Detailed analysis of mass transfer in liquid phase reactions involving porous catalysts. Important to the fine chemicals and pharmaceutical industries so it has appeal to many researchers in both industry and academia (chemical engineering and chemistry departments
Download or read book Modeling and Simulation of Heterogeneous Catalytic Reactions written by Olaf Deutschmann and published by John Wiley & Sons. This book was released on 2013-09-18 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize in Chemistry 2007 awarded to Gerhard Ertl for his groundbreaking studies in surface chemistry highlighted the importance of heterogeneous catalysis not only for modern chemical industry but also for environmental protection. Heterogeneous catalysis is seen as one of the key technologies which could solve the challenges associated with the increasing diversification of raw materials and energy sources. It is the decisive step in most chemical industry processes, a major method of reducing pollutant emissions from mobile sources and is present in fuel cells to produce electricity. The increasing power of computers over the last decades has led to modeling and numerical simulation becoming valuable tools in heterogeneous catalysis. This book covers many aspects, from the state-of-the-art in modeling and simulations of heterogeneous catalytic reactions on a molecular level to heterogeneous catalytic reactions from an engineering perspective. This first book on the topic conveys expert knowledge from surface science to both chemists and engineers interested in heterogeneous catalysis. The well-known and international authors comprehensively present many aspects of the wide bridge between surface science and catalytic technologies, including DFT calculations, reaction dynamics on surfaces, Monte Carlo simulations, heterogeneous reaction rates, reactions in porous media, electro-catalytic reactions, technical reactors, and perspectives of chemical and automobile industry on modeling heterogeneous catalysis. The result is a one-stop reference for theoretical and physical chemists, catalysis researchers, materials scientists, chemical engineers, and chemists in industry who would like to broaden their horizon and get a substantial overview on the different aspects of modeling and simulation of heterogeneous catalytic reactions.
Download or read book Catalysis By Gold written by Geoffrey C Bond and published by World Scientific. This book was released on 2006-08-15 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold has traditionally been regarded as inactive as a catalytic metal. However, the advent of nanoparticulate gold on high surface area oxide supports has demonstrated its high catalytic activity in many chemical reactions. Gold is active as a heterogeneous catalyst in both gas and liquid phases, and complexes catalyse reactions homogeneously in solution. Many of the reactions being studied will lead to new application areas for catalysis by gold in pollution control, chemical processing, sensors and fuel cell technology. This book describes the properties of gold, the methods for preparing gold catalysts and ways to characterise and use them effectively in reactions. The reaction mechanisms and reasons for the high activities are discussed and the applications for gold catalysis considered./a
Download or read book Alternative Catalytic Materials written by Justin S J Hargreaves and published by Royal Society of Chemistry. This book was released on 2018-07-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many important industrial chemical processes rely heavily on catalysis and so researchers are always on the lookout for alternative catalytic materials that may improve existing processes or lead to new ones. Families of alternative catalytic materials currently being investigated include the carbides, nitrides and phosphides as well as amorphous boron catalysts. The addition of carbon, nitrogen or phosphorous to transition metals and the creation of boron-transition metal alloys leads to catalytic materials that have interesting properties, with applications in a range of different reactions, including electrocatalysis. This book provides a comprehensive account of the preparation, characterisation and application of these catalytic materials. It is an important reference for researchers and industrialists working in heterogeneous catalysis and materials chemistry.
Download or read book Catalysis by Materials with Well Defined Structures written by Zili Wu and published by Academic Press. This book was released on 2015-03-26 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis by Materials with Well-Defined Structures examines the latest developments in the use of model systems in fundamental catalytic science. A team of prominent experts provides authoritative, first-hand information, helping readers better understand heterogeneous catalysis by utilizing model catalysts based on uniformly nanostructured materials. The text addresses topics and issues related to material synthesis, characterization, catalytic reactions, surface chemistry, mechanism, and theoretical modeling, and features a comprehensive review of recent advances in catalytic studies on nanomaterials with well-defined structures, including nanoshaped metals and metal oxides, nanoclusters, and single sites in the areas of heterogeneous thermal catalysis, photocatalysis, and electrocatalysis. Users will find this book to be an invaluable, authoritative source of information for both the surface scientist and the catalysis practitioner - Outlines the importance of nanomaterials and their potential as catalysts - Provides detailed information on synthesis and characterization of nanomaterials with well-defined structures, relating surface activity to catalytic activity - Details how to establish the structure-catalysis relationship and how to reveal the surface chemistry and surface structure of catalysts - Offers examples on various in situ characterization instrumental techniques - Includes in-depth theoretical modeling utilizing advanced Density Functional Theory (DFT) methods
Download or read book Adsorption Ion Exchange and Catalysis written by Stavros G. Poulopoulos and published by Elsevier. This book was released on 2006-08-23 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption, Ion Exchange and Catalysis is essentially a mixture of environmental science and chemical reactor engineering. More specifically, three important heterogeneous processes, namely, adsorption, ion exchange and catalysis, are analysed, from fundamental kinetics to reactor design with emphasis on their environmental applications. In Chapter 1, the subject of air and water pollution is dealt with. Data about pollutants and emission sources are given and the treatment methods are shortly presented. In Chapter 2, the very basics and historical development of adsorption, ion exchange and catalysis are presented as well as their environmental applications. Chapter 3 is devoted to heterogeneous processes and reactor analysis. All types of reactors are described in depth and reactor modelling, hydraulics and mass/heat transfer phenomena are examined for each type of reactor. Chapters 4 and 5 are dedicated to adsorption & ion exchange and catalysis, respectively. The basic principles are presented including kinetics, equilibrium, mass/heat transfer phenomena as well as the analytical solutions of the reactor models presented in Chapter 3. In the sixth chapter, the subject of scale up is approached. The two Annexes at the end of the book contain physical properties of substances of environmental interest as well as unit conversion tables. Finally, nearly all the examples contained are based on real experimental data found in literature with environmental interest. Most of the examples consider all aspects of operation design – kinetics, hydraulics and mass transfer.* Provides basic knowledge of major environmental problems and connects them to chemical engineering
Download or read book Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis written by G.F. Froment and published by Elsevier. This book was released on 1997-09-03 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many processes of the chemical industry are based upon heterogeneous catalysis. Two important items of these processes are the development of the catalyst itself and the design and optimization of the reactor. Both aspects would benefit from rigorous and accurate kinetic modeling, based upon information on the working catalyst gained from classical steady state experimentation, but also from studies using surface science techniques, from quantum chemical calculations providing more insight into possible reaction pathways and from transient experimentation dealing with reactions and reactors. This information is seldom combined into a kinetic model and into a quantitative description of the process. Generally the catalytic aspects are dealt with by chemists and by physicists, while the chemical engineers are called upon for mechanical aspects of the reactor design and its control. The symposium "Dynamics of Surfaces and Reaction Kinetics in Heterogeneous Catalysis" aims at illustrating a more global and concerted approach through a number of prestigious keynote lectures and severely screened oral and poster presentations.
Download or read book Perovskites and Related Mixed Oxides written by Pascal Granger and published by John Wiley & Sons. This book was released on 2016-02-23 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook and ready reference details all the main achievements in the field of perovskite-based and related mixed-oxide materials. The authors discuss, in an unbiased manner, the potentials as well as the challenges related to their use, thus offering new perspectives for research and development on both an academic and industrial level. The first volume begins by summarizing the different synthesis routes from molten salts at high temperatures to colloidal crystal template methods, before going on to focus on the physical properties of the resulting materials and their related applications in the fields of electronics, energy harvesting, and storage as well as electromechanics and superconductivity. The second volume is dedicated to the catalytic applications of perovskites and related mixed oxides, including, but not limited to total oxidation of hydrocarbons, dry reforming of methane and denitrogenation. The concluding section deals with the development of chemical reactors and novel perovskite-based applications, such as fuel cells and high-performance ceramic membranes. Throughout, the contributions clearly point out the intimate links between structure, properties and applications of these materials, making this an invaluable tool for materials scientists and for catalytic and physical chemists.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Air Pollution Abstracts written by and published by . This book was released on 1975 with total page 1182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Pollution Abstracts written by United States. Environmental Protection Agency. Air Pollution Control Office and published by . This book was released on 1971 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinetics of Chemical Reactions written by Guy B. Marin and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This systematic presentation covers both experimental and theoretical kinetic methods, as well as fundamental and applied. The identification of dominant reaction paths, reaction intermediates and rate-determining steps allows a quantification of the effects of reaction conditions and catalyst properties, providing guidelines for catalyst optimization. In addition, the form in which the equations are presented allows for their straightforward implementation for scale-up and chemical reactor design purposes. Throughout, the methodologies given are illustrated by many examples.
Download or read book Advances in Catalysis written by and published by Academic Press. This book was released on 1980-01-23 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Catalysis
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1969 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1983 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Chemistry and Catalysis written by Albert F. Carley and published by Springer Science & Business Media. This book was released on 2002-09-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting results are still emerging from the many research groups working in this fertile area and the book is an excellent stimulus to researchers at the start of the 21st century."--BOOK JACKET.
Download or read book An Introduction to Chemical Engineering Kinetics Reactor Design written by Charles G. Hill and published by Рипол Классик. This book was released on with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt:
