Download or read book Adhesives for Wood and Lignocellulosic Materials written by R. N. Kumar and published by John Wiley & Sons. This book was released on 2019-07-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and ground-breaking book from two leading specialists on adhesion and adhesives for wood and lignocellulosic materials The book is a comprehensive treatment covering a wide range of subjects uniquely available in a single source for the first time. A material science approach has been adopted in dealing with wood adhesion and adhesives. The approach of the authors is to bring out hierarchical cellular and porous characteristics of wood with polymeric cell wall structure, along with the associated non-cell wall extractives, which greatly influence the interaction of wood substrate with polymeric adhesives in a very unique manner not existent in the case of other adherends. Environmental aspects, in particular formaldehyde emission from adhesive bonded wood products, has been included. A significant feature of the book is the inclusion of polymeric matrix materials for wood polymer composites.
Download or read book Lignocellulosic Fibers and Wood Handbook written by Mohamed Naceur Belgacem and published by John Wiley & Sons. This book was released on 2016-04-05 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will focus on lignocellulosic fibres as a raw material for several applications. It will start with wood chemistry and morphology. Then, some fibre isolation processes will be given, before moving to composites, panel and paper manufacturing, characterization and aging.
Download or read book Bio based Wood Adhesives written by Zhongqi He and published by CRC Press. This book was released on 2017-05-25 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding plays an increasing role in the forest product industry and is a key factor for efficiently utilizing timber and other lignocellulosic resources. As synthetic wood adhesives are mostly derived from depleting petrochemical resources and have caused increasing environmental concern, natural product and byproduct-derived adhesives have attracted much attention in the last decades. Although adhesives made from plant and animal sources have been in existence since ancient times, increased knowledge of their chemistry and improved technical formulation of their preparation are still needed to promote their broader industrial applications. The primary goals of this book are to (1) synthesize the fundamental knowledge and latest research on bio-based adhesives from a remarkable range of natural products and byproducts, (2) identify need areas and provide directions of future bio-based adhesive research, and (3) help integrating research findings in practical adhesive application for maximal benefits. This book covers information on a variety of natural products and byproducts and the latest research on formulation, testing and improvement of the relevant adhesives in fifteen chapters written by an international group of accomplished contributors. This book will serve as a valuable reference source for university faculty, graduate students, research scientists, agricultural and wood engineers, international organization advocators and government agency regulators who work and deal with enhanced utilization of agricultural and forest products and byproducts.
Download or read book Green Adhesives written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-03 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Adhesives: Preparation, Properties and Applications deals with the fabrication methods, characterization, and applications of green adhesives. It also includes the collective properties of waterborne, bio, and wound-healing green adhesives. Exclusive attention is devoted to discussing the applications of green adhesives in biomedical coatings, food, and industrial applications.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Progress in Adhesion and Adhesives Volume 6 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the voluminous research being published, it is difficult, if not impossible, to stay abreast of current developments in a given area. The review articles in this book consolidate information to provide an alternative way to follow the latest research activity and developments in adhesion science and adhesives. With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. The 19 chapters in this Volume 6 follow the same order as the review articles originally published in RAA in the year 2020 and up to June 2021. The subjects of these 19 chapters fall in the following areas: Adhesives and adhesive joints Contact angle Reinforced polymer composites Bioadhesives Icephobic coatings Adhesives based on natural resources Polymer surface modification Superhydrophobic surfaces The topics covered include: hot-melt adhesives; adhesively-bonded spar-wingskin joints; contact angle hysteresis; fiber/matrix adhesion in reinforced thermoplastic composites; bioadhesives in biomedical applications; mucoadhesive pellets for drug delivery applications; bio-inspired icephobic coatings; wood adhesives based on natural resources; adhesion in biocomposites; vacuum UV surface photo-oxidation of polymers and other materials; vitrimers and their relevance to adhesives; superhydrophobic surfaces by microtexturing; structural acrylic adhesives; mechanically durable water-repellent surfaces; mussel-inspired underwater adhesives; and cold atmospheric pressure plasma technology for modifying polymers. Audience This book will be valuable and useful to researchers and technologists in materials science, nanotechnology, physics, surface and colloid chemistry in multiple disciplines in academia, industry, various research institutes and other organizations.
Download or read book Wood Adhesives written by Antonio Pizzi and published by CRC Press. This book was released on 2011-01-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood adhesives are of tremendous industrial importance, as more than two-thirds of wood products in the world today are completely or partially bonded together using a variety of adhesives. Adhesive bonding offers many advantages over other joining methods for wood components, and there has been a great deal of R& D activity in devising new wood adhesives or improving the existing ones. The modern mantra in all industrial sectors is: "think green, go green," which has attracted much attention in the wood adhesive industry. Therefore, there is also a lot of research activity in synthesizing environmentally benign and human-friendly wood adhesives. This book is divided into four parts: Part 1: Fundamental Adhesion Aspects in Wood Bonding; Part 2: Synthetic Adhesives; Part 3: Environment-friendly adhesives; and Part 4: Wood Welding and General Paper. It addresses many different types of wood adhesives, as well as bonding (welding) of wood components without adhesives, a more recent development. The information contained in this book is valuable for individuals engaged in all aspects of wood adhesion and adhesives and, hopefully, will inspire new ideas in wood adhesives, a topic of vital industrial importance.
Download or read book Eco Friendly Adhesives for Wood and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2021-01-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of eco-friendly resins and their composite materials covering their synthesis, sources, structures and properties for different industrial applications to support the ongoing research and development in eco-friendly and renewable commercial products. It provides comparative discussions on the properties of eco-friendly resins with other polymer composites. It is a useful reference on bio-based eco-friendly polymer resins, wood-based composites, natural fibers and biomass materials for the polymer scientists, engineers and material scientists.
Download or read book Introduction to Wood and Natural Fiber Composites written by Douglas D. Stokke and published by John Wiley & Sons. This book was released on 2013-12-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, there has been a shift in research and industrial practice, and products traditionally manufactured primarily from wood are increasingly combined with other nonwood materials of either natural or synthetic origin. Wood and other plant-based fiber is routinely combined with adhesives, polymers, and other "ingredients" to produce composite materials. Introduction to Wood and Natural Fiber Composites draws together widely scattered information concerning fundamental concepts and technical applications, essential to the manufacture of wood and natural fiber composites. The topics addressed include basic information on the chemical and physical composition of wood and other lignocellulosic materials, the behavior of these materials under thermocompression processes, fundamentals of adhesion, specific adhesive systems used to manufacture composite materials, and an overview of the industrial technologies used to manufacture major product categories. The book concludes with a chapter on the burgeoning field of natural fiber-plastic composites. Introduction to Wood and Natural Fiber Composites is a valuable resource for upper-level undergraduate students and graduate students studying forest products and wood science, as well as for practicing professionals working in operational areas of wood- and natural-fiber processing. For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: Overview of lignocellulosic material, their chemical and physical composition Consolidation behavior of wood and fiber in response to heat and pressure Fundamentals of adhesion Adhesives used to bond wood and lignocellulosic composites Manufacturing technology of major product types Fiber/plastic composites
Download or read book Chemical Modification of Lignocellulosic Materials written by DavidN.-S. Hon and published by Routledge. This book was released on 2017-09-29 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume emphasizes the growing need for wood products with advanced engineering properties. It details the fundamental principles of cellulose technology and presents current techniques to modifying the basic chemistry of lignocellulosic materials. The work: discusses the cost-efficient use of cellulose derivatives in a variety of commodities; highlights the chemical modification of wood by methods such as etherification, esterification and thermoplasticization; considers recent progress in the lignocellulosic liquefaction of wood; and more.
Download or read book Progress in Adhesion and Adhesives Volume 4 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2019-07-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A solid collection of interdisciplinary review articles on the latest developments in adhesion science and adhesives technology With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series "Progress in Adhesion and Adhesives"), the present volume comprises 9 review articles published in Volume 6 (2018) of Reviews of Adhesion and Adhesives. The subject of these reviews fall into the following general areas: 1. Adhesion to wood and wood bonds 2. Adhesive joints 3. Adhesion in microelectronic packaging 4. Surface modification 5. Contact angle, wettability and surface free energy. The topics covered include: Adhesion phenomena in microelectronic packaging; adhesives for wood and lignocellulosic materials; adhesion to wood and lignocellulosic materials; adhesively bonded lap joints having bi-adhesive and modulus-graded bondlines; adhesion between compounded elastomers; applications of contact angle measurements in pharmaceuticals and foods; oxygen or ammonia plasma treatment of polyolefin surfaces; surface free energy determination of powders and particles; wood bonds; and dispersion adhesion forces between macroscopic objects.
Download or read book Lignocellulose for Future Bioeconomy written by Hidayah Ariffin and published by Elsevier. This book was released on 2019-04-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulose for Future Bioeconomy discusses the conversion and utilization of lignocellulosic biomass. This book focuses on the utilization of lignocelluloses for various products, including biopolymers, bionanomaterials and bioproducts. Recent findings in scientific investigation, engineering, product development, economic and lifecycle analysis are discussed, as are current synthesis technologies and potential applications. The book progresses from a discussion of the potential sources of biomass, to the refinement and processing of materials. A sampling of various sustainability issues faced by industries in their production methods and a look at real world examples of the use of lignocellulose-based materials in the bioeconomy round out the discussion. - Presents information on lignocellulosic biomass management and its utilization for the production of bioproducts, biopolymers and bionanomaterials - Highlights the applications of advanced materials developed from lignocellulosic biomass and their contribution towards future bioeconomy - Discusses the lifecycle of lignocellulosic biomass
Download or read book Wood Adhesives written by A. Pizzi and published by Routledge. This book was released on 2018-10-08 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perfect companion to the highly acclaimed Volume 1 of Wood Adhesives,Volume 2 presents stimulating discussions on technically and economically importantadhesives for wood bonding-covering their preparation and formulation, as well astechniques and suggestions for their application.Like its companion book, Wood Adhesives, Volume 2 provides up-to-date informationand analysis of new technologies and recent breakthroughs ... gives insightinto the relationship between adhesive chemistry and technical application . . . anddiscusses present and future trends likely to have considerable impact on the field.Elaborating upon general overviews presented in Volume 1, Wood Adhesives,Volume 2 includes a chapter on protein adhesives ... fills the gap on the chemistryof polyvinyl acetate wood adhesives ... contains a detailed discussion of formaldehydeemission ... and much more.A complementary and much needed follow-up to Volume 1, Wood Adhesives,Volume 2 is essential reading for wood technologists; adhesives and physicalchemists; forest products researchers; polymer scientists; chemical, mechanical, process,and civil engineers who must choose and apply wood adhesives; and advancedundergraduate and graduate students in the above disciplines.
Download or read book Green Polymer Composites Technology written by Inamuddin and published by CRC Press. This book was released on 2016-11-03 with total page 1590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction to "green" or environmentally friendly polymer composites developed using renewable polymers of natural origin such as starch, lignin, cellulose acetate, poly-lactic acid (PLA), polyhydroxylalkanoates (PHA), polyhydroxylbutyrate (PHB), etc., and the development of modern technologies for preparing green composites with various applications. The book also discusses major applications of green polymer composites in industries such as medicine, biotechnology, fine chemicals and engineering.
Download or read book Functional Materials From Lignin Methods And Advances written by Xian Jun Loh and published by World Scientific Publishing. This book was released on 2018-06-08 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignin is one of the most abundant plant-derived feedstock on earth and qualifies as a renewable material. However, lignin is widely recognized as waste byproduct of the cellulosic ethanol and pulp and paper industry. How to properly modify lignin and develop it into functional polymers is a huge challenge, but an attractive research topic in both industry and academia.This book brings together leading engineering approaches to address the challenges of lignin valorization. It presents the chemistry and properties of different types of lignin, and explores the cutting-edge approaches of lignin modifications. Unlike any existing texts, this book not only summarizes the traditional ways of using lignin, but also presents various potential applications of lignin materials together with advanced processing techniques.The basis of lignin (its chemistry, types and properties) is described, as are different approaches to modify it. The features of lignin and its copolymers are explored and aligned with their potential applications. In addition to the carbon materials from lignin, the advanced fabrication approaches to engineer lignin-based micro/nano-structural materials are summarized.
Download or read book Handbook of Composites from Renewable Materials Structure and Chemistry written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2016-12-30 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique multidisciplinary 8-volume set focuses on the emerging issues concerning synthesis, characterization, design, manufacturing and various other aspects of composite materials from renewable materials and provides a shared platform for both researcher and industry. The Handbook of Composites from Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The Handbook comprises 169 chapters from world renowned experts covering a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Volume 1 is solely focused on the Structure and Chemistry of renewable materials. Some of the important topics include but not limited to: carbon fibers from sustainable resources; polylactic acid composites and composite foams based on natural fibres; composites materials from other than cellulosic resources; microcrystalline cellulose and related polymer composites; tannin-based foam; renewable feedstock vanillin derived polymer and composites; silk biocomposites; bioderived adhesives and matrix polymers; biomass-based formaldehyde-free bioresin; isolation and characterization of water soluble polysaccharide; biobased fillers; keratin-based materials in biotechnology; structure of proteins adsorbed onto bioactive glasses for sustainable composite; effect of filler properties on the antioxidant response of starch composites; composite of chitosan and its derivate; magnetic biochar from discarded agricultural biomass; biodegradable polymers for protein and peptide conjugation; polyurethanes and polyurethane composites from biobased / recycled components.
Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.
