Download or read book Friction Wear and Adhesion Characteristics of Titanium aluminum Alloys in Vacuum written by Donald H. Buckley and published by . This book was released on 1966 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, wear, and adhesion measurements were made in vacuum of titanium-aluminum alloys containing 11, 16, and 21 weight percent aluminum. Experiments were conducted with a 3/16 inch radius rider sliding on the flat surface of a 2.5 inch diameter disk specimen at loads to 1500 grams. The disk was rotated to produce sliding velocities to 750 centimeters per second. With increasing addition of aluminum to titanium, an increase in lattice ratio for titanium occurred along with a decrease in friction, wear, and adhesion. The increases in lattice ratio with the addition of aluminum to titanium occurred even though the unit cell size decreased; these results are unlike those with the addition of tin and oxygen to alloys exhibited adhesion characteristics which could be considered negligible. These alloys exhibited superior friction and wear properties in vacuum compared with 52100 and 440-C stainless steels. Experiments were conducted with the alloys sliding on themselves and on 440-C stainless steel. Friction was less for the alloys sliding on 440-C stainless than when sliding on themselves.
Download or read book Molecular Biology of the Cell written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesive Joints Formation Characteristics and Testing written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-27 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.
Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Download or read book Adhesives Technology Handbook written by Sina Ebnesajjad and published by William Andrew. This book was released on 2014-11-26 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion
Download or read book Handbook of Adhesion written by D. E. Packham and published by John Wiley & Sons. This book was released on 2006-02-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the successful Handbook of Adhesion provides concise and authoritative articles covering many aspects of the science and technology associated with adhesion and adhesives. It is intended to fill a gap between the necessarily simplified treatment of the student textbook and the full and thorough treatment of the research monograph and review article. The articles are structured in such a way, with internal cross-referencing and external literature references, that the reader can build up a broader and deeper understanding, as their needs require. This second edition includes many new articles covering developments which have risen in prominence in the intervening years, such as scanning probe techniques, the surface forces apparatus and the relation between adhesion and fractal surfaces. Advances in understanding polymer - polymer interdiffusion are reflected in articles drawing out the implications for adhesive bonding. In addition, articles derived from the earlier edition have been revised and updated where needed. Throughout the book there is a renewed emphasis on environmental implications of the use of adhesives and sealants. The scope of the Handbook, which features nearly 250 articles from over 60 authors, includes the background science - physics, chemistry and material science - and engineering, and also aspects of adhesion relevant to the use of adhesives, including topics such as: Sealants and mastics Paints and coatings Printing and composite materials Welding and autohesion Engineering design The Handbook of Adhesion is intended for scientists and engineers in both academia and industry, requiring an understanding of the various facets of adhesion.
Download or read book Fundamentals of Adhesion and Interfaces written by Lawrence P Demajo and published by CRC Press. This book was released on 2000-10-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The understanding of adhesion and interfacial effects has benefited from various technological advances in recent years. Advances in laboratory equipment, analytical tools such as the nanoindentor, SIMS, and ESCA, and improvements in computing technology have greatly expanded the relevant body of knowledge. Rapid progress in adhesion and interfacial science has made dissemination of results in a timely fashion more important than ever. Accordingly, the editors of this book organized an ACS symposium, sponsored by the Division of Polymer Chemistry, entitled Fundamentals of Adhesion and Interfaces. The papers in this volume were selected from those presented at the symposium.
Download or read book Progress in Adhesion and Adhesives Volume 6 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2021-08-16 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the voluminous research being published, it is difficult, if not impossible, to stay abreast of current developments in a given area. The review articles in this book consolidate information to provide an alternative way to follow the latest research activity and developments in adhesion science and adhesives. With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. The 19 chapters in this Volume 6 follow the same order as the review articles originally published in RAA in the year 2020 and up to June 2021. The subjects of these 19 chapters fall in the following areas: Adhesives and adhesive joints Contact angle Reinforced polymer composites Bioadhesives Icephobic coatings Adhesives based on natural resources Polymer surface modification Superhydrophobic surfaces The topics covered include: hot-melt adhesives; adhesively-bonded spar-wingskin joints; contact angle hysteresis; fiber/matrix adhesion in reinforced thermoplastic composites; bioadhesives in biomedical applications; mucoadhesive pellets for drug delivery applications; bio-inspired icephobic coatings; wood adhesives based on natural resources; adhesion in biocomposites; vacuum UV surface photo-oxidation of polymers and other materials; vitrimers and their relevance to adhesives; superhydrophobic surfaces by microtexturing; structural acrylic adhesives; mechanically durable water-repellent surfaces; mussel-inspired underwater adhesives; and cold atmospheric pressure plasma technology for modifying polymers. Audience This book will be valuable and useful to researchers and technologists in materials science, nanotechnology, physics, surface and colloid chemistry in multiple disciplines in academia, industry, various research institutes and other organizations.
Download or read book Adhesion written by American Society for Testing and Materials and published by ASTM International. This book was released on 1965 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesion in Foods written by Amos Nussinovitch and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the layman, adhesion is a simple matter of how well two different materials stick together, and adhesion measurements provide some indication of the force required to separate them. However, a more detailed look at adhesion shows that it is a very important feature of food throughout its manufacturing, packaging and storage. Chapters are fully devoted to the fascinating topic of adhesion in foods. Key features of the book include, but are not limited to: definition and nomenclature of adhesion; adhesion mechanisms and measurements; stickiness in various foods and its relation to technological processes; perception of stickiness; hydrocolloids as adhesive agents for foods; adhesion phenomena in coated, battered, breaded and fried foods; electrostatic adhesion in foods; multilayered adhered food products, and adhesion of substances to packaging and cookware. Adhesion in Foods: Fundamental Principles and Applications is dedicated not only to the academic community but also to the broader population of industrialists and experimentalists who will find it to be not only a source of knowledge, but also a launching pad for novel ideas and inventions. In particular, this book is expected to be of interest to personnel involved in food formulation, food scientists, food technologists, industrial chemists and engineers, and those working in product development.
Download or read book Adhesion to Fluoropolymers written by Derek Brewis and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Bacterial Adhesion written by Yuehuei H. An and published by Springer Science & Business Media. This book was released on 2000-01-21 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on bacterial adhesion and its significance is a major field involving many different aspects of nature and human life, such as marine science, soil and plant ecology, most importantly, the biomedical field. The adhesion ofbacteria to the food industry, and human tissue surfaces and implanted biomaterial surfaces is an important step in the patho genesis of infection. Handbook 0/ Bacterial Adhesion: Principles, Methods, and Applications is an outgrowth of the editors' own quest for information on laboratory techniques for studying bacte rial adhesion to biomaterials, bone, and other tissues and, more importantly, a response to significant needs in the research community. This book is designed to be an experimental guide for biomedical scientists, biomaterials scientists, students, laboratory technicians, or anyone who plans to conduct bacterial adhesion studies. More specifically, it is intended for all those researchers facing the chal lenge of implant infections in such devices as orthopedic prostheses, cardiovascular devices or catheters, cerebrospinal fluid shunts or extradural catheters, thoracic or abdominal catheters, portosystemic shunts or bile stents, urological catheters or stents, plastic surgical implants, oral or maxillofacial implants, contraceptive implants, or even contact lenses. It also covers research methods for the study of bacterial adhesion to tis sues such as teeth, respiratory mucosa, intestinal mucosa, and the urinary tract. In short, it constitutes a handbook for biomechanical and bioengineering researchers and students at all levels.
Download or read book Adhesion 9 written by K.W. Allen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of adhesives continues to increase both in importance and in areas of use, particularly in engineering construction. Alongside this is a steady growth in our fundamental understanding of the factors involved. Both of these topics are reflected in various meetings and nowhere more consistently than at the Annual Conference on Adhesion and Adhesives at The City University each Easter. 1984 was the twenty-second of these when, once again, people carne from far and near to present accounts of their work and to discuss them in all their variety. This publication makes the papers available to the wider audience who were not able to attend in person. In presenting this volume, may I express sincere gratitude, both personally and on behalf of the University, to all those who contributed in so many and various ways to the conference. K. W. ALLEN Contents Preface. v l. Textile-to-Rubber Adhesion: Theory and Practice David B. Wootton (Milliken Industrials Ltd, Wellington Mill, Wellington Street, Bury, Lancashire BL8 2AY, UK) 2. Aspects of Adhesion Promotion with Flexible Coated Fabrics 13 J. R. Holker and A. J. G. Sagar (Shirley Institute, Didsbury, Manchester M20 8RX, UK) 3. The Adhesion of Some Ethylene-Vinyl Acetate Copolymers Applied as Hot Melt Coatings to Metals 33 T. A. Hatzinikolaou and D. E. Packham (School of Materials Science, University of Bath, Claverton Down, Bath BA2 7 A Y, UK) 4. Formation of Indium Bonds for Ultrasonic Systems and Examination of Metal Diffusion Bonds by Scanning Acoustic Microscopy .
Download or read book Adhesion in Pharmaceutical Biomedical and Dental Fields written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2017-06-23 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book to cover adhesion in pharmaceutical, biomedical and dental fields The phenomenon of adhesion is of cardinal importance in the pharmaceutical, biomedical and dental fields. A few eclectic examples will suffice to underscore the importance/relevance of adhesion in these three areas. For example, the adhesion between powdered solids is of crucial importance in tablet manufacture. The interaction between biodevices (e.g., stents, bio-implants) and body environment dictates the performance of such devices, and there is burgeoning research activity in modifying the surfaces of such implements to render them compatible with bodily components. In the field of dentistry, the modern trend is to shift from retaining of restorative materials by mechanical interlocking to adhesive bonding. The book contains 15 chapters written by internationally-renowned subject matter experts and is divided into four parts: Part 1: General Topics; Part 2: Adhesion in Pharmaceutical Field; Part 3: Adhesion in Biomedical Field; and Part 4: Adhesion in Dental Field. The topics covered include: Theories or mechanisms of adhesion; wettability of powders; role of surface free energy in tablet strength and powder flow behavior; mucoadhesive polymers for drug delivery systems; transdermal patches; skin adhesion in long-wear cosmetics; factors affecting microbial adhesion; biofouling and ways to mitigate it; adhesion of coatings on surgical tools and bio-implants; adhesion in fabrication of microarrays in clinical diagnostics; antibacterial polymers for dental adhesives and composites; evolution of dental adhesives; and testing of dental adhesive joints.
Download or read book Handbook of Adhesion Technology written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2011-06-10 with total page 1569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives have been used for thousands of years, but until 100 years ago, the vast majority was from natural products such as bones, skins, fish, milk, and plants. Since about 1900, adhesives based on synthetic polymers have been introduced, and today, there are many industrial uses of adhesives and sealants. It is difficult to imagine a product—in the home, in industry, in transportation, or anywhere else for that matter—that does not use adhesives or sealants in some manner. The Handbook of Adhesion Technology is intended to be the definitive reference in the field of adhesion. Essential information is provided for all those concerned with the adhesion phenomenon. Adhesion is a phenomenon of interest in diverse scientific disciplines and of importance in a wide range of technologies. Therefore, this handbook includes the background science (physics, chemistry and materials science), engineering aspects of adhesion and industry specific applications. It is arranged in a user-friendly format with ten main sections: theory of adhesion, surface treatments, adhesive and sealant materials, testing of adhesive properties, joint design, durability, manufacture, quality control, applications and emerging areas. Each section contains about five chapters written by internationally renowned authors who are authorities in their fields. This book is intended to be a reference for people needing a quick, but authoritative, description of topics in the field of adhesion and the practical use of adhesives and sealants. Scientists and engineers of many different backgrounds who need to have an understanding of various aspects of adhesion technology will find it highly valuable. These will include those working in research or design, as well as others involved with marketing services. Graduate students in materials, processes and manufacturing will also want to consult it.
Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in
Download or read book Polymer Adhesion Friction and Lubrication written by Hongbo Zeng and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically dedicated to polymer and biopolymer systems, Polymer Adhesion, Friction, and Lubrication guides readers to the scratch, wear, and lubrication properties of polymers and the engineering applications, from biomedical research to automotive engineering. Author Hongbo Zeng details different experimental and theoretical methods used to probe static and dynamic properties of polymer materials and biomacromolecular systems. Topics include the use of atomic force microscopy (AFM) to analyze nanotribology, polymer thin films and brushes, nanoparticles, rubber and tire technology, synovial joint lubrication, adhesion in paper products, bioMEMS, and electrorheological fluids.
