Download or read book Adhesion Aspects of Thin Films Volume 1 written by Kash L. Mittal and published by CRC Press. This book was released on 2014-07-30 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the First International Symposium on Adhesion Aspects of Thin Films, held in Newark, New Jersey, October 28-29, 1999. Films and coatings are used for a variety of purposes a decorative, protective, functional, etc. a in a host of applications. Irrespective of the intended function or application of a film
Download or read book Adhesion Aspects of Thin Films written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesion Aspects of Thin Films written by K. L. Mittal and published by VSP. This book was released on 2001-04-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the First International Symposium on Adhesion Aspects of Thin Films, held in Newark, New Jersey, October 28-29, 1999. Films and coatings are used for a variety of purposes – decorative, protective, functional, etc. – in a host of applications. Irrespective of the intended function or application of a film or a coating, their adequate adhesion to the underlying substrates is of cardinal importance. Concomitantly, the need to understand the factors controlling adhesion and to tailor adhesion to a desired level is quite patent. This book contains a total of 16 papers, which were presented by researchers from academia, industry and other laboratories, and have been rigorously peer reviewed, suitably revised and properly edited before inclusion. The topics covered include: mechanisms, origin, evolution and measurement of stresses in thin films; surface stress effects on the intrinsic stress; various factors affecting stresses in thin films; delamination of coatings caused by residual stress; effects of surface treatments on the adhesion of metallic films; adhesion of CVD diamond to carbide cutting inserts; effect of carbon contaminant on adhesion of aluminum films; effect of interlayers on adhesion of ceramic coatings; effect of residual stress on adhesion and wear resistance of hard coatings; tribological properties of ceramic films; oxide layers as barrier coatings on a plastic substrate; adhesion aspects of organic coatings to metals; and adhesion of thin plasma polymerized fluorocarbon films.This book, providing a commentary on the current state of knowledge of adhesion of thin films, will be useful to anyone interested in thin films and will provide ideas on how to improve or tailor adhesion of a film or a coating for a given situation.
Download or read book Adhesion Aspects of Thin Films written by K. L. Mittal and published by . This book was released on 2007 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesion Aspects of Thin Films volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2005-05-06 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the International Symposium on Adhesion Aspects of Thin Films (including Adhesion Measurement, and Metallized plastics) held in Orlando, FL, December 15-16, 2003. This volume is divided into three parts. Part 1 “General Papers”; Part 2 “Metallized Plastics”; and Part 3 “Adhesion Measurement”. The topics covered include: Factors influencing adhesion of thin films; relevance of stresses in film adhesion; surface effects on intrinsic thin film stresses; adhesion improvement; hemocompatibility of DLC coatings; thin films of various materials on a host of substrates; thin polymer films; surface modification of polymers; adhesion of metal films on polymers; investigation of metal-polymer interactions; adhesion measurement; scratch test; microscratch test; and abrasion and durability of thin films.
Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in
Download or read book Surfactant Science and Technology written by Laurence S. Romsted and published by CRC Press. This book was released on 2014-05-05 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactant research explores the forces responsible for surfactant assembly and the critical industrial, medical, and personal applications, including viscosity control, microelectronics, drug stabilization, drug delivery, cosmetics, enhanced oil recovery, and foods. Surfactant Science and Technology: Retrospects and Prospects, "a Festschrift in ho
Download or read book Application of Fracture Mechanics to Polymers Adhesives and Composites written by D R Moore and published by Elsevier. This book was released on 2003-12-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Fracture Mechanics to Polymers, Adhesives and Composites
Download or read book The Failure Mechanisms of Coated Precision Glass Molding Tools written by Kyriakos Georgiadis and published by Apprimus Wissenschaftsverlag. This book was released on 2015-10-19 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molding tools in precision glass molding fail easily, even with protective thin film coatings applied. In this work, various efficient methods for assessing glass-coating interactions are developed, including a new, automated testing rig. Analysis of the testing results provides a better understanding of these mechanisms and how they are influenced by material properties and process parameters, so that the appropriate measures can be taken to prolong the life of the molding tools.
Download or read book Adhesion written by Wulff Possart and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing the most recent developments this book addresses both the basic and applied aspects of adhesion. The authors present the latest results on fundamental aspects, adhesion in biology, chemistry for adhesive formulation, surface chemistry and the pretreatment of adherends, mechanical issues, non-destructive testing and the durability of adhesive joints, as well as advanced technical applications of adhesive joints. Prominent scientists review the current level of knowledge concerning the role of chemical bonds in adhesion, new resins and nanocomposites for adhesives, and about the role played by macromolecular architecture in the properties of hot melt and pressure sensitive adhesives. Written by 34 acknowledged experts from academic and industrial research facilities, this is a valuable source of information for chemists, physicists, biologists and engineers, as well as graduate students interested in fundamental and practical adhesion.
Download or read book Engineering Thin Films and Nanostructures with Ion Beams written by Emile Knystautas and published by CRC Press. This book was released on 2018-10-03 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: While ion-beam techniques have been used to create thin films in the semiconductor industry for several decades, these methods have been too costly for other surface treatment applications. However, as manufacturing devices become increasingly smaller, the use of a directed-energy ion beam is finding novel industrial applications that require the custom tailoring of new materials and devices, including magnetic storage devices, photonics, opto-electronics, and molecular transport. Engineering Thin Films and Nanostructures with Ion Beams offers a thorough narrative of the recent advances that make this technology relevant to current and future applications. Featuring internationally recognized researchers, the book compiles their expertise in a multidimensional source that: Highlights the mechanisms and visual evidence of the effects of single-ion impacts on metallic surfaces Considers how ion-beam techniques can help achieve higher disk-drive densities Introduces gas-cluster ion-beam technology and reviews its precedents Explains how ion beams are used to aggregate metals and semiconductors into nanoclusters with nonlinear optical properties Addresses current challenges in building equipment needed to produce nanostructures in an industrial setting Examines the combination of ion-beam techniques, particularly with physical vapor deposition Delineates the fabrication of nanopillars, nanoflowers, and interconnected nanochannels in three dimensions by using atomic shadowing techniques Illustrates the production of nanopores of varying dimensions in polymer films, alloys, and superconductors using ion-beam irradiation Shows how fingerprints can be made more reliable as forensic evidence by recoil-mixing them into the substrate using ion beams From the basics of the ion-beam modification of materials to state-of-the-art applications, Engineering Th
Download or read book Functional Materials for Bio Applications written by Laura Maria Vergani and published by Frontiers Media SA. This book was released on 2020-12-15 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Progress in Adhesion and Adhesives written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2015-07-27 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 13 review articles written by subject experts and published in 2014 in the Journal Reviews of Adhesion and Adhesives. The rationale for publication of this book is that currently the RAA has limited circulation, so this book provides broad exposure and dissemination of the concise, critical, illuminating, and thought-provoking review articles. The subjects of the reviews fall into 4 general areas: 1. Polymer surface modification 2. Biomedical, pharmaceutical and dental fields 3. Adhesives and adhesive joints 4. General Adhesion Aspects The topics covered include: Adhesion of condensed bodies at microscale; imparting adhesion property to silicone material; functionally graded adhesively bonded joints; synthetic adhesives for wood panels; adhesion theories in wood adhesive bonding; adhesion and surface issues in biocomposites and bionanocomposites; adhesion phenomena in pharmaceutical products and applications of AFM; cyanoacrylate adhesives in surgical applications; ways to generate monosort functionalized polyolefin surfaces; nano-enhanced adhesives; bonding dissimilar materials in dentistry; flame treatment of polymeric materials—relevance to adhesion; and mucoadhesive polymers for enhancing retention of ocular drug delivery.
Download or read book Advances in Contact Angle Wettability and Adhesion Volume 1 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2013-08-16 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of wettabilty is extremely important from both fundamental and applied aspects. The applications of wettability range from self-cleaning windows to micro- and nanofluidics. This book represents the cumulative wisdom of a contingent of world-class (researchers engaged in the domain of wettability. In the last few years there has been tremendous interest in the "Lotus Leaf Effect" and in understanding its mechanism and how to replicate this effect for myriad applications. The topics of superhydrophobicity, omniphobicity and superhydrophilicity are of much contemporary interest and these are covered in depth in this book.
Download or read book Particles on Surfaces 1 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Symposium on Particles on Surfaces: Detection, Adhesion and Removal held under the auspices of the Fine Particle Society in San Francisco, July 28-August 2, 1986. The study of particles on surfaces is extremely important in many areas of human endeavor (ranging from microelectronics to optics to biomedical). A complete catalog of modern precision and sophisticated technologies where particles on surfaces are of cardinal importance will be prohibitively long, but the following eclectic examples should underscore the concern about particles on a variety of surfaces. In the semiconductor world of shrinking dimensions, particles which, a few years ago, were cosmetically undesirable but functionally innocuous can potentially be killer defects now. As the device sizes get smaller, there will be more and more concern about smaller and smaller particles. In the information storage technology, the gap between the head and the disk is very narrow, and if a particle is trapped in the gap that can have very grave consequences. The implications of particulate contamination on sensitive optical surfaces is all too manifest. So the particulate contamination on surfaces is undesirable from functional, yield and reliability points of view. This symposium was organized with the following objectives in mind: to bring together active practitioners in this field; to provide a forum for discussion of the latest research and development activities in this area; to provide opportunity for cross-pollination of ideas; and to highlight topics which needed intensified effort.
Download or read book Metallized Plastics 3 written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Third Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the auspices of the Dielectric Science and Technology Division of the Electrochemical Society in Phoenix, Arizona, October 13-18, 1991. This series of symposia to address the subject of metallized plastics was initiated in 1988 and the premier symposium was held in Chicago, October 10-12, 1988, followed by the second event in Montreal, Canada, May 7-10, 1990. The rroceedings of these two symposia have been properly documented ,2. The third symposium was a huge success like the previous two events, and all this is testimonial to the brisk interest and high tempo of R&D activity in the fie14 of metallized plastics. This further bolsters our earlier thinking that there was a conspicuous need to hold symposia on this topic on a regular basis and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. The study of metallized plastics constitutes an important human endeavor l and as pointed out earlier there are myriad applications of metallized plastics ranging from very commonplace to exotic. Also a survey of the recent literature will reveal that both the fundamental and applied aspects of metallized plastics are being pursued with great vigor.
Download or read book Adhesive Joints written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in terfacial aspects, joint design, mode of stress, external environ ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.
