Download or read book Additional Finite Element Method for Analysis of Reinforced Concrete Structures at Limit States written by Ermakova A.V. and published by Издательство АСВ. This book was released on 2012 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work presents the theoretical basis of Additional Finite Element Method (AFEM), which is a variant of the Finite Element Method (FEM) for analysis of reinforced concrete structures at limit state. AFEM adds to the traditional sequence of problem by FEM the units of the two well-known methods of the structural design: method of additional loads and limit state method. The problem is solved by introduction of ideal failure models and additional design diagrams formed from additional finite elements, where each AFE describes the limit state reached by the main element. The main relations defining the properties of AFEs as well as the examples of the use of Additional Finite Element Method for analysis of reinforced concrete structures at limit state are given in the work too.
Download or read book Structural Concrete written by M. D. Kotsovos and published by Thomas Telford. This book was released on 1995 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows the unifying generality of the proposed approach and the reliability of the ensuing computer package, for which the sole input is the specified cylinder strength of concrete and the yield is the stress of steel. This book offers an understanding of structural concrete behaviour, and illustrates the revision required for improving methods.
Download or read book Practitioners Guide to Finite Element Modelling of Reinforced Concrete Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-linear computer analysis methods have seen remarkable advancement in the last half-century. The state-of-the-art in non-linear finite element analysis of reinforced concrete has progressed to the point where such procedures are close to being practical, every-day tools for design office engineers. Non-linear computer analysis procedures can be used to provide reliable assessments of the strength and integrity of damaged or deteriorated structures, or of structures built to previous codes, standards or practices deemed to be deficient today. They can serve as valuable tools in assessing the expected behaviour from retrofitted structures, or in investigating and rationally selecting amongst various repair alternatives. fib Bulletin 45 provides an overview of current concepts and techniques relating to computer-based finite element modelling of structural concrete. It summarises the basic knowledge required for use of nonlinear analysis methods as applied to practical design, construction and maintenance of concrete structures, and attempts to provide a diverse and balanced portrayal of the current technical knowledge, recognizing that there are often competing and conflicting viewpoints. This report does not give advice on picking one model over another but, rather, provides guidance to designers on how to use existing and future models as tools in design practice, in benchmarking of their models against established and reliable test data and in selecting an appropriate safety factor as well as recognising various pitfalls. fib Bulletin 45 is intended for practicing engineers, and therefore focuses more on practical application and less on the subtleties of constitutive modelling.
Download or read book Proceedings of the 4th International Conference on Industrial Engineering written by Andrey A. Radionov and published by Springer. This book was released on 2018-12-07 with total page 2490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 4th International Conference on Industrial Engineering (ICIE), held in Moscow, Russia in May 2018. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Finite Element Analysis of Reinforced Concrete Structures written by Laura N. Lowes and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 6th International Conference on Industrial Engineering ICIE 2020 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-31 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Finite Element Analysis of Reinforced Concrete Structures II written by Jeremy Isenberg and published by . This book was released on 1993 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 10 papers discussing finite element analysis of reinforced concrete structures presented at an international workshop held in New York, New York, June 2-5, 1991.
Download or read book Proceedings of the 8th International Conference on Industrial Engineering written by Andrey A. Radionov and published by Springer Nature. This book was released on 2022-08-15 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering is discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. This book gathers selected papers presented at the 8th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia, in May 2022. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, this book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book III European Conference on Computational Mechanics written by C. A. Mota Soares and published by Springer Science & Business Media. This book was released on 2008-06-05 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: III European Conference on Computational Mechanics: Solids, Structures and Coupled Problem in Engineering Computational Mechanics in Solid, Structures and Coupled Problems in Engineering is today a mature science with applications to major industrial projects. This book contains the edited version of the Abstracts of Plenary and Keynote Lectures and Papers, and a companion CD-ROM with the full-length papers, presented at the III European Conference on Computational Mechanics: Solids, Structures and Coupled Problems in Engineering (ECCM-2006), held in the National Laboratory of Civil Engineering, Lisbon, Portugal 5th - 8th June 2006. The book reflects the state-of-art of Computation Mechanics in Solids, Structures and Coupled Problems in Engineering and it includes contributions by the world most active researchers in this field.
Download or read book Computational Methods for Reinforced Concrete Structures written by Ulrich Häußler-Combe and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the application of numerical methods to reinforced concrete structures. To analyze reinforced concrete structures linear elastic theories are inadequate because of cracking, bond and the nonlinear and time dependent behavior of both concrete and reinforcement. These effects have to be considered for a realistic assessment of the behavior of reinforced concrete structures with respect to ultimate limit states and serviceability limit states. The book gives a compact review of finite element and other numerical methods. The key to these methods is through a proper description of material behavior. Thus, the book summarizes the essential material properties of concrete and reinforcement and their interaction through bond. These basics are applied to different structural types such as bars, beams, strut and tie models, plates, slabs and shells. This includes prestressing of structures, cracking, nonlinear stressstrain relations, creeping, shrinkage and temperature changes. Appropriate methods are developed for each structural type. Large displacement and dynamic problems are treated as well as short-term quasi-static problems and long-term transient problems like creep and shrinkage. Most problems are illustrated by examples which are solved by the program package ConFem, based on the freely available Python programming language. The ConFem source code together with the problem data is available under open source rules at concrete-fem.com. The author aims to demonstrate the potential and the limitations of numerical methods for simulation of reinforced concrete structures, addressing students, teachers, researchers and designing and checking engineers.
Download or read book Computational Modelling of Concrete and Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2022-05-22 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.
Download or read book State of the art Report on Finite Element Analysis of Reinforced Concrete written by Z. P. Bažant and published by . This book was released on 1982-01-01 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Modelling of Structural Concrete written by Michael D. Kotsovos and published by CRC Press. This book was released on 2015-05-20 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Powerful Tool for the Analysis and Design of Complex Structural ElementsFinite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions presents a finite-element model of structural concrete under short-term loading, covering the whole range of short-term loading conditions, from static (monotonic and cyclic) to
Download or read book Finite Element Analysis of Prestressed Concrete Structures Using Post Tensioning Steel written by Yu Huang and published by Cambridge Scholars Publishing. This book was released on 2020-05-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the theory and applications of finite element (FE) modeling of post-tensioned (PT) concrete structures, and provides the updated MATLAB code (as of 2019). The challenge of modeling PT prestressed concrete structures lies in the treatment of the interface between the concrete and prestressing tendons. Using MATLAB, this study develops an innovative nonlinear FE formulation which incorporates contact techniques and engineering elements to considerably reduce the need of computational power. This FE formulation has the ability to simulate different PT frame systems with fully bonded, fully unbonded or partially bonded tendons, as well as actual sliding behavior and frictional effects in the tendons. It also allows for the accurate simulation of anchor seating loss.
Download or read book Reinforced Concrete Beams Columns and Frames written by Jostein Hellesland and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.
Download or read book Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams written by Xiaoshan Lin and published by Woodhead Publishing. This book was released on 2019-10-18 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams presents advanced methods and techniques for the analysis of composite and FRP reinforced concrete beams. The title introduces detailed numerical modeling methods and the modeling of the structural behavior of composite beams, including critical interfacial bond-slip behavior. It covers a new family of composite beam elements developed by the authors. Other sections cover nonlinear finite element analysis procedures and the numerical modeling techniques used in commercial finite element software that will be of particular interest to engineers and researchers executing numerical simulations. Gives advanced methods and techniques for the analysis of composite and fiber Reinforced Plastic (FRP) and reinforced concrete beams Presents new composite beam elements developed by the authors Introduces numerical techniques for the development of effective finite element models using commercial software Discusses the critical issues encountered in structural analysis Maintains a clear focus on advanced numerical modeling
Download or read book Computational Modelling of Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2018-01-31 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and concrete structures. Computational Modelling of Concrete Structures reviews and discusses research advancements and the applicability and robustness of methods and models for reliable analysis of complex concrete, reinforced concrete and pre-stressed concrete structures in engineering practice. The contributions cover both computational mechanics and computational modelling aspects of the analysis and design of concrete and concrete structures: Multi-scale cement and concrete research: experiments and modelling Aging concrete: from very early ages to decades-long durability Advances in material modelling of plain concrete Analysis of reinforced concrete structures Steel-concrete interaction, fibre-reinforced concrete, and masonry Dynamic behaviour: from seismic retrofit to impact simulation Computational Modelling of Concrete Structures is of special interest to academics and researchers in computational concrete mechanics, as well as industry experts in complex nonlinear simulations of concrete structures.
