Download or read book Mobile Communications written by Jaiyong Lee and published by Springer. This book was released on 2003-08-02 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-proceedings of the 7th CMDA International Conference, CIC 2002, held in Seoul, Korea, in October/November 2002. The 52 revised full papers presented were carefully selected during two rounds of reviewing and post-conference improvements from 140 conference presentations. The papers are organized in topical sections on modulation and coding, cellular mobile communications, IMT-2000 systems, 4G mobile systems and technology, software defined radio, wireless LAN and wireless QoS, multiple access technology, wireless multimedia services, resource management, mobility management and mobile IP, and mobile and wireless systems.
Download or read book Wireless Communications Networking and Applications written by Qing-An Zeng and published by Springer. This book was released on 2015-10-28 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a series of conferences on Wireless Communications, Networking and Applications that have been held on December 27-28, 2014 in Shenzhen, China. The meetings themselves were a response to technological developments in the areas of wireless communications, networking and applications and facilitate researchers, engineers and students to share the latest research results and the advanced research methods of the field. The broad variety of disciplines involved in this research and the differences in approaching the basic problems are probably typical of a developing field of interdisciplinary research. However, some main areas of research and development in the emerging areas of wireless communication technology can now be identified. The contributions to this book are mainly selected from the papers of the conference on wireless communications, networking and applications and reflect the main areas of interest: Section 1 - Emerging Topics in Wireless and Mobile Computing and Communications; Section 2 - Internet of Things and Long Term Evolution Engineering; Section 3 - Resource Allocation and Interference Management; Section 4 - Communication Architecture, Algorithms, Modeling and Evaluation; Section 5 - Security, Privacy, and Trust; and Section 6 - Routing, Position Management and Network Topologies.
Download or read book OPNET IoT Simulation written by Min Chen and published by Springer Nature. This book was released on 2019-09-17 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book offering an in-depth and comprehensive IoT network simulation, supported by OPNET tool. Furthermore, the book presents the simulations of IoT in general, not limited by OPNET. The authors provide rich OPNET IoT simulation codes, with detailed explanation regarding the functionalities of the model. These codes can facilitate readers’ fast implementation, and the shared model can guide readers through developing their own research. This book addresses various versions of Internet of Things (IoT), including human-centric IoT, green IoT, Narrow band IoT, Smart IoT, IoT-Cloud integration. The introduced OPNET IoT simulation provides a comprehensive platform to simulate above-mentioned IoT systems. Besides, this book introduces OPNET semi-physical simulation in detail. Based on this technology, simulated IoT and practical cloud are seamlessly connected with each other. On top of this “IoT-cloud-integration” semi-physical simulation environment, various smart IoT applications can be realized.
Download or read book Ad Hoc Mobile and Wireless Networks written by Maria Rita Palattella and published by Springer Nature. This book was released on 2019-09-25 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Conference on Ad-Hoc, Mobile, and Wireless Networks, ADHOC-NOW 2019, held in Luxembourg, in October 2019. The 37 full and 10 short papers presented were carefully reviewed and selected from 64 submissions. The papers provide an in-depth and stimulating view on the new frontiers in the field of mobile, ad hoc and wireless computing. They are organized in the following topical sections: IoT for emergency and disaster management; scheduling and synchronization in WSN; routing strategies for WSN; LPWANs and their integration with satellite; performance improvement of wireless and sensor networks; optimization schemes for increasing sensors lifetime; vehicular and UAV networks; body area networks, IoT security and standardization.
Download or read book Modeling and Tools for Network Simulation written by Klaus Wehrle and published by Springer Science & Business Media. This book was released on 2010-09-22 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial step during the design and engineering of communication systems is the estimation of their performance and behavior; especially for mathematically complex or highly dynamic systems network simulation is particularly useful. This book focuses on tools, modeling principles and state-of-the art models for discrete-event based network simulations, the standard method applied today in academia and industry for performance evaluation of new network designs and architectures. The focus of the tools part is on two distinct simulations engines: OmNet++ and ns-3, while it also deals with issues like parallelization, software integration and hardware simulations. The parts dealing with modeling and models for network simulations are split into a wireless section and a section dealing with higher layers. The wireless section covers all essential modeling principles for dealing with physical layer, link layer and wireless channel behavior. In addition, detailed models for prominent wireless systems like IEEE 802.11 and IEEE 802.16 are presented. In the part on higher layers, classical modeling approaches for the network layer, the transport layer and the application layer are presented in addition to modeling approaches for peer-to-peer networks and topologies of networks. The modeling parts are accompanied with catalogues of model implementations for a large set of different simulation engines. The book is aimed at master students and PhD students of computer science and electrical engineering as well as at researchers and practitioners from academia and industry that are dealing with network simulation at any layer of the protocol stack.
Download or read book 4th International Conference on Internet of Things and Connected Technologies ICIoTCT 2019 written by Neeta Nain and published by Springer Nature. This book was released on 2020-02-14 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 4th International Conference on Internet of Things and Connected Technologies (ICIoTCT), held on May 9–10, 2019, at Malaviya National Institute of Technology (MNIT), Jaipur, India. The Internet of Things (IoT) promises to usher in a revolutionary, fully interconnected “smart” world, with relationships between objects and their environment and objects and people becoming more tightly intertwined. The prospect of the Internet of Things as a ubiquitous array of devices bound to the Internet could fundamentally change how people think about what it means to be “online”. The ICIotCT 2019 conference provided a platform to discuss advances in Internet of Things (IoT) and connected technologies, such as various protocols and standards. It also offered participants the opportunity to interact with experts through keynote talks, paper presentations and discussions, and as such stimulated research. With the recent adoption of a variety of enabling wireless communication technologies, like RFID tags, BLE, ZigBee, embedded sensor and actuator nodes, and various protocols such as CoAP, MQTT and DNS, IoT has moved on from its infancy. Today smart sensors can collaborate directly with machines to automate decision-making or to control a task without human involvement. Further, smart technologies, including green electronics, green radios, fuzzy neural approaches, and intelligent signal processing techniques play an important role in the development of the wearable healthcare devices.
Download or read book Demystifying Internet of Things Security written by Sunil Cheruvu and published by Apress. This book was released on 2019-08-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Break down the misconceptions of the Internet of Things by examining the different security building blocks available in Intel Architecture (IA) based IoT platforms. This open access book reviews the threat pyramid, secure boot, chain of trust, and the SW stack leading up to defense-in-depth. The IoT presents unique challenges in implementing security and Intel has both CPU and Isolated Security Engine capabilities to simplify it. This book explores the challenges to secure these devices to make them immune to different threats originating from within and outside the network. The requirements and robustness rules to protect the assets vary greatly and there is no single blanket solution approach to implement security. Demystifying Internet of Things Security provides clarity to industry professionals and provides and overview of different security solutions What You'll Learn Secure devices, immunizing them against different threats originating from inside and outside the network Gather an overview of the different security building blocks available in Intel Architecture (IA) based IoT platforms Understand the threat pyramid, secure boot, chain of trust, and the software stack leading up to defense-in-depth Who This Book Is For Strategists, developers, architects, and managers in the embedded and Internet of Things (IoT) space trying to understand and implement the security in the IoT devices/platforms.
Download or read book Internet of Things written by Subhas Chandra Mukhopadhyay and published by Springer Science & Business Media. This book was released on 2014-01-25 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancement in sensor technology, smart instrumentation, wireless sensor networks, miniaturization, RFID and information processing is helping towards the realization of Internet of Things (IoT). IoTs are finding applications in various area applications including environmental monitoring, intelligent buildings, smart grids and so on. This book provides design challenges of IoT, theory, various protocols, implementation issues and a few case study. The book will be very useful for postgraduate students and researchers to know from basics to implementation of IoT.
Download or read book Department of Defense Dictionary of Military and Associated Terms written by United States. Joint Chiefs of Staff and published by . This book was released on 1979 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Multimedia Information Processing PCM 2005 written by Yo-Sung Ho and published by Springer. This book was released on 2005-10-19 with total page 1115 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are delighted to welcome readers to the proceedings of the 6th Pacific-Rim Conference on Multimedia (PCM). The first PCM was held in Sydney, Australia, in 2000. Since then, it has been hosted successfully by Beijing, China, in 2001, Hsinchu, Taiwan, in 2002, Singapore in 2003, and Tokyo, Japan, in 2004, and finally Jeju, one of the most beautiful and fantastic islands in Korea. This year, we accepted 181 papers out of 570 submissions including regular and special session papers. The acceptance rate of 32% indicates our commitment to ensuring a very high-quality conference. This would not be possible without the full support of the excellent Technical Committee and anonymous reviewers that provided timely and insightful reviews. We would therefore like to thank the Program Committee and all reviewers. The program of this year reflects the current interests of the PCM’s. The accepted papers cover a range of topics, including, all aspects of multimedia, both technical and artistic perspectives and both theoretical and practical issues. The PCM 2005 program covers tutorial sessions and plenary lectures as well as regular presentations in three tracks of oral sessions and a poster session in a single track. We have tried to expand the scope of PCM to the artistic papers which need not to be strictly technical.
Download or read book Industrial System Engineering for Drones written by Neeraj Kumar Singh and published by Apress. This book was released on 2019-07-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a complex mechanical system where electronics and mechanical engineers work together as a cross-functional team. Using a working example, this book is a practical “how to” guide to designing a drone system. As system design becomes more and more complicated, systematic, and organized, there is an increasingly large gap in how system design happens in the industry versus what is taught in academia. While the system design basics and fundamentals mostly remain the same, the process, flow, considerations, and tools applied in industry are far different than that in academia. Designing Drone Systems takes you through the entire flow from system conception to design to production, bridging the knowledge gap between academia and the industry as you build your own drone systems. What You’ll LearnGain a high level understanding of drone systems Design a drone systems and elaborating the various aspects and considerations of design Review the principles of the industrial system design process/flow, and the guidelines for drone systems Look at the challenges, limitations, best practices, and patterns of system design Who This Book Is For Primarily for beginning or aspiring system design experts, recent graduates, and system design engineers. Teachers, trainers, and system design mentors can also benefit from this content.
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book High speed Networks and Internets written by William Stallings and published by . This book was released on 2002 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: William Stallings offers the most comprehensive technical book to address a wide range of design issues of high-speed TCP/IP and ATM networks in print to date. "High-Speed Networks and Internets" presents both the professional and advanced student an up-to-date survey of key issues. The Companion Website and the author's Web page offer unmatched support for students and instructors. The book features the prominent use of figures and tables and an up-to-date bibliography. In this second edition, this award-winning and best-selling author steps up to the leading edge of integrated coverage of key issues in the design of high-speed TCP/IP and ATM networks to include the following topics: Unified coverage of integrated and differentiated services. Up-to-date and comprehensive coverage of TCP performance. Thorough coverage of next-generation Internet protocols including (RSVP), (MPLS), (RTP), and the use of Ipv6. Unified treatment of congestion in data networks; packet-switching, frame relay, ATM networks, and IP-based internets. Broad and detailed coverage of routing, unicast, and multicast. Comprehensive coverage of ATM; basic technology and the newest traffic control standards. Solid, easy-to-absorb mathematical background enabling understanding of the issues related to high-speed network performance and design. Up-to-date treatment of gigabit Ethernet. The first treatment of self-similar traffic for performance assessment in a textbook on networks (Explains the mathematics behind self-similar traffic and shows the performance implications and how to estimate performance parameters.) Up-to-date coverage of compression. (A comprehensive survey.) Coverage of gigabit networks. Gigabit design issues permeate the book.
Download or read book Wireless Network Simulation written by Henry Zárate Ceballos and published by Apress. This book was released on 2021-05-11 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to run your own simulation by working with model analysis, mathematical background, simulation output data, and most importantly, a network simulator for wireless technology. This book introduces the best practices of simulator use, the techniques for analyzing simulations with artificial agents and the integration with other technologies such as Power Line Communications (PLC). Network simulation is a key technique used to test the future behavior of a network. It’s a vital development component for the development of 5G, IoT, wireless sensor networks, and many more. This book explains the scope and evolution of the technology that has led to the development of dynamic systems such as Internet of Things and fog computing. You'll focus on the ad hoc networks with stochastic behavior and dynamic nature, and the ns-3 simulator. These are useful open source tools for academics, researchers, students and engineers to deploy telecommunications experiments, proofs and new scenarios with a high degree of similarity with reality. You'll also benefit from a detailed explanation of the examples and the theoretical components needed to deploy wireless simulations or wired, if necessary. What You’ll Learn Review best practices of simulator uses Understand techniques for analyzing simulations with artificial agents Apply simulation techniques and experiment design Program on ns-3 simulator Analyze simulation results Create new modules or protocols for wired and wireless networks Who This Book Is For Undergraduate and postgraduate students, researchers and professors interested in network simulations. This book also includes theoretical components about simulation, which are useful for those interested in discrete event simulation DES, general theory of simulation, wireless simulation and ns-3 simulator.
Download or read book World Telecommunication Development Conference written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: [Vol. 2:] contributions from representatives of international and regional organizations and telecommunication operators and manufacturers / official statements and addresses.
Download or read book Packets with Deadlines written by I-Hong Hou and published by Morgan & Claypool Publishers. This book was released on 2013-05-30 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the explosive increase in the number of mobile devices and applications, it is anticipated that wireless traffic will increase exponentially in the coming years. Moreover, future wireless networks all carry a wide variety of flows, such as video streaming, online gaming, and VoIP, which have various quality of service (QoS) requirements. Therefore, a new mechanism that can provide satisfactory performance to the complete variety of all kinds of flows, in a coherent and unified framework, is needed. In this book, we introduce a framework for real-time wireless networks. This consists of a model that jointly addresses several practical concerns for real-time wireless networks, including per-packet delay bounds, throughput requirements, and heterogeneity of wireless channels. We detail how this framework can be employed to address a wide range of problems, including admission control, packet scheduling, and utility maximization. Table of Contents: Preface / Introduction / A Study of the Base Case / Admission Control / Scheduling Policies / Utility Maximization without Rate Adaptation / Utility Maximization with Rate Adaptation / Systems with Both Real-Time Flows and Non-Real-Time Flows / Broadcasting and Network Coding / Bibliography / Authors' Biographies
Download or read book Effect of Slow Fading and Adaptive Modulation on TCP UDP Performance of High speed Packet Wireless Networks written by Xuanming Dong and published by . This book was released on 2006 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: High speed data wireless networks in multipath environments suffer channel impairment from many sources such as thermal noise, path loss, shadowing, and fading. In particular, short-term fading caused by mobility imposes irreducible error floor bounds on system performance. We study the effect of fading on the performance of the widely used TCP/UDP protocol, and investigate how to improve TCP performance over fading channels. Our solutions target upcoming mobile wireless systems such as IEEE 802.16e wireless MANs "Metropolitan Area Networks" where adaptive modulation is enabled and the underlying medium access scheme is On-Demand Time Division Multiple Access "On-Demand TDMA". Adaptive modulation is used in the new generation of wireless systems to increase the system throughput and significantly improve spectral effciency by matching parameters of the physical layer to the time-varying fading channels. Most high-rate applications for such wireless systems rely on the reliable service provided by TCP protocol. The effect of adaptive modulation on TCP throughput is investigated. A semi-Markov chain model for TCP congestion/flow control behavior and a multi-state Markov chain model for Rayleigh fading channels are used together to derive the steady state throughput of TCP Tahoe and Reno. The theoretical prediction based on our analysis is consistent with simulation results using the network simulator NS2. The analytical and simulation results triggered the idea of cross-layer TCP protocol design for single-user scenarios. The fading parameters of wireless channels detected in the physical layer can be used to dynamically tune the parameters "such as packet length and advertised receiver window size" of the TCP protocol in the transport layer so that TCP throughput is improved. For multi-user scenarios, we study how multi-user diversity can be used to improve th.
