Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9
Download or read book Activated Sludge Models ASM1 ASM2 ASM2d and ASM3 written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Activated sludge models ASM1 ASM2 ASM2d and ASM3 p japansk written by M. Henze and published by . This book was released on 2005 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Activated Sludge Models Asmi Asm2 asm2d and Asm3 written by Scientific and Technical Report NO. 9 and published by . This book was released on with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22
Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by IWA Publishing. This book was released on 2015-02-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.
Download or read book Activated Sludge Modelling Processes in Theory and Practice written by M. Henze and published by IWA Publishing (International Water Assoc). This book was released on 2002-05-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of models in activated sludge design and operation is increasing, with a similar trend seen in education. Starting with the original IAWPRC Activated Sludge Model no 1 (ASM1) and the subsequent ASM2 and ASM2D, the first generation of activated sludge models have played an important role in practice. With the development of the latest IWA Activated Sludge Model no 3 further progress has been made, and given the concurrent development of new methods for characterization of biomass and wastewater, this is a field of vigorous activity at present. The fifth Kollekolle Seminar brought together many of the world's leading experts on the activated sludge process, who have been working with activated sludge models in practice and research. The aim, as with previous seminars was to present the latest research findings, putting them into the proper perspective. From this high-quality programme 22 papers have been selected and revised to provide the best collection of papers on the state of the art of activated sludge modeling. Papers cover the following topics: modeling developments; wastewater and biomass characterization and parameter identification; modeling in practices.
Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2010-08-31 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international, comprehensive guide to modeling and simulation studies in activated sludge systems leads the reader through the entire modeling process – from building a mechanistic model to applying the model in practice. Mathematical Modelling and Computer Simulation of Activated Sludge Systems will: Enhance the readers’ understanding of different model concepts for several (most essential) biochemical processes in the advanced activated sludge systems Provide extensive and up-to-date coverage of experimental methodologies of a complete model parameter estimation (longitudinal dispersion coefficient, influent wastewater fractions, kinetic and stoichiometric coefficients, settling velocity, etc.) Summarize and critically review the ranges of model parameters reported in literature Compare the existing protocols aiming at a systematic organization of the simulation study Outline the capabilities of the existing commercial simulators Present documented, successful case studies of practical model applications as a guide while planning a simulation study. The book is organized to provide a general background and some basic definitions, then theoretical aspects of modeling and finally, the issues important for practical model applications. Mathematical Modelling and Computer Simulation of Activated Sludge Systems can be used as supplementary material for a graduate level wastewater engineering courses and is useful to a wide audience of researchers and practitioners. Experienced model users such as consultants, trained plant management staff may find the book useful as a reference and as a resource for self-guided study. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/MathmematicalModellingandActivatedSludgeSystems
Download or read book Respirometry in Control of the Activated Sludge Process Benchmarking Control Strategies written by John B. Copp and published by IWA Publishing. This book was released on 2002-05-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The respiration rate of activated sludge has generated much interest, because it is an essential variable in the activated sludge process and provides information on biomass activity and concentration of waste components. Recognising the need for an extensive evaluation of respirometry in control of the activated sludge process, IWA published Scientific and Technical Report (STR7): Respirometry in Control of the Activated Sludge Process: Principles, which included the biological background, measuring principles, measured and deduced variables, an introduction to control system principles and an overview of proposed and applied control strategies. To complete the work, a second STR: Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies was commissioned and, through the generous support of 14 corporate sponsors, a well-defined project was set up with the aim to accomplish an ambitious mission: the development of a simulation protocol (known as the "IWA Simulation Benchmark") and the unbiased evaluation of many respirometry-based control strategies. This Report includes a complete description of the simulation protocol including model plants, simulation procedures and evaluation criteria. Also included in this STR is an overview of the strategy evaluations and a look into the future of respirometry as the basis for control. Finally, to ease the transition from paper to computer, and increase the application of the IWA Simulation Benchmark, a CD is included with many benchmark files and control strategy layouts generated using a variety of simulation platforms including GPS-XTM, STOATTM and WESTTM. This Report will be an invaluable source of information for practitioners and consultants dealing with the operation and control of activated sludge processes, developers of control systems, control software and simulation software, and manufacturers of respirometers and other environmental instruments in all industries dealing with toxic wastes. Scientific and Technical Report No. 11 Also available: Respiromentry in Control of the Activated Sludge Process: Principles
Download or read book Intensifying Activated Sludge Using Media Supported Biofilms written by Dwight Houweling and published by CRC Press. This book was released on 2019-08-16 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intensifying Activated Sludge Using Media-Supported Biofilms will be of interest to practicing wastewater treatment process designers, along with those seeking more compact and energy-efficient wastewater treatment options. The advantages of Moving Bed Biological Reactor (MBBR)-based hybrid processes are now well-established in practice, leading to their increased use in the field. Membrane Aerated Biofilm Reactor (MABR)-based hybrid processes are much newer and offer further systematic process and energy advantages. This book examines the evolution of hybrid technologies as well as the potential for continued improvement of biological wastewater treatment techniques. Features: Reviews current approaches for intensifying biological wastewater treatment processes and their mechanistic bases. Examines hybrid suspended growth/biofilm-based wastewater treatment processes, including the newly-developed MABR-based processes, and their unique dynamic performance characteristics. Presents a novel method for characterizing the performance and process intensification advantages of hybrid processes. Provides guidance for simulating the performance of hybrid processes, including oxygen transfer in MABR hybrid processes.
Download or read book Frontiers in Wastewater Treatment and Modelling written by Giorgio Mannina and published by Springer. This book was released on 2017-05-04 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and applications in the field of water management and environmental engineering as presented by leading researchers, engineers, life scientists and practitioners from around the world at the Frontiers International Conference on Wastewater Treatment (FICWTM), held in Palermo, Italy in May 2017. The topics covered are highly diverse and include the physical processes of mixing and dispersion, biological developments and mathematical modeling, such as computational fluid dynamics in wastewater, MBBR and hybrid systems, membrane bioreactors, anaerobic digestion, reduction of greenhouse gases from wastewater treatment plants, and energy optimization. The contributions amply demonstrate that the application of cost-effective technologies for waste treatment and control is urgently needed so as to implement appropriate regulatory measures that ensure pollution prevention and remediation, safeguard public health, and preserve the environment. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different water specialists.
Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing. This book was released on 2008-09-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.
Download or read book Robust Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2011-04-11 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this monograph is to present a broad range of well worked out, recent theoretical and application studies in the field of robust control system analysis and design. The contributions presented here include but are not limited to robust PID, H-infinity, sliding mode, fault tolerant, fuzzy and QFT based control systems. They advance the current progress in the field, and motivate and encourage new ideas and solutions in the robust control area.
Download or read book Formation characterization and mathematical modeling of the aerobic granular sludge written by Bing-Jie Ni and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic granular sludge technology will play an important role as an innovative technology alternative to the present activated sludge process in industrial and municipal wastewater treatment in the near future. Intended to fill the gaps in the studies of aerobic granular sludge, this thesis comprehensively investigates the formation, characterization and mathematical modeling of aerobic granular sludge, through integrating the process engineering tools and advanced molecular microbiology. The research results of this thesis contributed significantly to the advance of understanding and optimization of the bacterial granulation processes, the next generation of technology for cost-effective biological wastewater treatment. Dr. Bing-Jie Ni works at Advanced Water Management Centre (AWMC) of The University of Queensland, Australia.
Download or read book Management and Mitigation of Acid Mine Drainage in South Africa written by Mujuru, Munyaradzi and published by Africa Institute of South Africa. This book was released on 2017-02-03 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: South Africa is facing the increasing challenge of acid mine drainage (AMD) whose genesis is the country’s mining history, which paid limited attention to post-mining mine site management. In mineral resource-rich Africa, this has emerged as one of the most daunting challenges of our time. South Africa has been bold in its approach to mitigating this problem, although the challenge is multi-faceted. On a positive note, substantial research has been conducted to confront the challenge. However, thus far, the research has been largely fragmented. This book builds on the work that has been done, but also provides a refreshing multi-disciplinary approach that is useful in addressing the AMD challenges that South Africa and the continent face. Whilst addressing the problem as a scientific and engineering challenge, the book also exposes the economic, policy and legal challenges involved in addressing the problem. The book concludes, quite uniquely, that AMD is an opportunity that can be used by South Africa and Africa to solve problems, such as acute water shortage, as well as mineral recovery operations.
Download or read book Photo Activated Sludge A Novel Algal Bacterial Biotreatment for Nitrogen Removal from Wastewater written by Angélica Rada Ariza and published by CRC Press. This book was released on 2018-12-07 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitrogen rich wastewaters (10-400 mg N L-1) are usually produced by municipal, industrial and agricultural wastes, such as effluents from anaerobic treatments. These represent a risk to the environment due to the high nutrient concentrations (nitrogen and phosphorous), which can cause eutrophication of water bodies, deteriorating the quality of the ecosystems. As a solution, the potential nitrogen removal capacity of a novel bio-treatment system, namely the Photo-Activated Sludge (PAS), which is composed of microalgae and bacteria consortia, is presented in this thesis. This novel bio-treatment is based on the symbiosis between microalgae, nitrifiers and heterotrophic bacteria (microalgal-bacterial consortia). Experimental work using photobioreactors for the cultivation of microalgae and bacteria under sequencing batch conditions showed that microalgal-bacterial consortia can remove ammonium 50% faster than solely microalgal consortia. The increase in ammonium removal rates was due to the action of nitrifying bacteria, supplied with oxygen produced by algae. Nitrification was the main ammonium removal mechanism within the microalgal-bacterial biomass, followed by algal uptake and nutrient requirements for bacterial growth. Carbon oxidation and denitrification were the main removal mechanisms for organic carbon. Hence, the role of algae within the microalgal-bacterial system is to provide oxygen to support the aerobic processes. The microalgal-bacterial system offers the possibility of reducing the hydraulic retention time, which can decrease the large area requirements often demanded by algal systems.
Download or read book Water Science and Technology written by Nicholas Gray and published by CRC Press. This book was released on 2017-04-07 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water has become one of the most important issues of our time intertwined with global warming and population expansion. The management of water supplies and the conservation of water resources remains one of the most challenging yet exciting issues of our time. Water and wastewater treatment technologies are constantly evolving creating an increasingly sustainable industry that is one of the world's largest and most interdisciplinary sectors, employing chemists, microbiologists, botanists, zoologists as well as engineers, computer specialists and a range of different management professionals. This accessible student textbook introduces the reader to the key concepts of water science and technology by explaining the fundamentals of hydrobiology, aquatic ecosystems, water treatment and supply, wastewater treatment and integrated catchment management. This fourth edition is extensively changed throughout, with new coverage of the effects of climate change, environmental assessment, sustainability and the threat to biodiversity. The text serves as a primer for both undergraduate and graduate students in either science or engineering who have an interested in freshwater biology/hydrobiology or environmental engineering. It is also useful as a unified transitional course for those who want to span the traditional areas of engineering, biology, chemistry, microbiology or business. Professionals and consultants will also find the book a useful reference.