Download or read book Ground Penetrating Radar for Evaluating Subsurface Conditions for Transportation Facilities written by Rexford M. Morey and published by Transportation Research Board. This book was released on 1998 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state Department of Transportation (DOT) geotechnical, bridge, and pavement engineers, engineering geologists, consultants involved with ground penetrating radar (GPR) investigations for state DOTs, and researchers. It describes the current state of the practice of using GPR for evaluating subsurface conditions for transportation facilities. This was accomplished by conducting a literature search and review and an extensive survey of U.S. and Canadian transportation agencies and practitioners, as well as limited international information collection. GPR is a noninvasive nondestructive tool used in transportation applications such as evaluation and characterization of pavement systems, soils, and environmental problems. This report of the Transportation Research Board presents information on the principles, equipment, logistics, applications, and limitations of GPR pertaining to transportation applications. Selected case studies for which ground truth information is available are presented. In addition, an extensive bibliography and glossary are provided as well as appending information about GPR manufacturers from their literature.
Download or read book Ground Penetrating Radar Surveys to Characterize Pavement Layer Thickness Variations at GPS Sites written by Kenneth R. Maser and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new nondestructive, noncontact method for thickness measurement is available and can be implemented from a survey vehicle moving at highway speed. The technology incorporates horn antenna radar equipment coupled with customized processing software. This report describes an accuracy evaluation of this technology in which results from 10 Strategic Highway Research Program Long Term Pavement Performance (SHRP-LTPP) asphalt pavement sections in 10 states were compared to core data. The results were evaluated and reported in two steps--blind and calibrated.
Download or read book Nondestructive Testing of Pavements and Backcalculation of Moduli written by ASTM Committee D-18 on Soil and Rock. Subcommittee D-4 on Road and Paving Materials and published by ASTM International. This book was released on 1994 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of June 1993 international symposium held in Atlanta, Georgia, called specifically to develop and standardized evaluation procedures for non-destructive methods of testing pavements. The 29 papers discuss analytical models and techniques, measurement and calculation techniques in the field and laboratory, problems and errors associated with backcalculation methods and design parameters, and testing for other pavement uses. Also includes a history of the quest for a standard and the status of that effort. Reproduced from typescripts. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Pavement Asset Management written by Ralph Haas and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and practical, Pavement Asset Management provides an essential resource for educators, students and those in public agencies and consultancies who are directly responsible for managing road and airport pavements. The book is comprehensive in the integration of activities that go into having safe and cost-effective pavements using the best technologies and management processes available. This is accomplished in seven major parts, and 42 component chapters, ranging from the evolution of pavement management to date requirements to determining needs and priority programming of rehabilitation and maintenance, followed by structural design and economic analysis, implementation of pavement management systems, basic features of working systems and finally by a part on looking ahead. The most current methodologies and practical applications of managing pavements are described in this one-of-a-kind book. Real world up-to-date examples are provided, as well as an extensive list of references for each part.
Download or read book Nondestructive Testing of Pavements and Backcalculation of Moduli written by Shiraz D. Tayabji and published by ASTM International. This book was released on 2000 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the previous two symposia, the 32 papers from the June/July, 1999, Seattle symposium present advances in the nondestructive testing of pavements using conventional falling weight deflectometer techniques and other promising techniques such as ground penetrating radar, rolling weight deflecto
Download or read book Evaluation of Ground Penetrating Radar Applications for Pavement and Bridge Management written by Kenneth R. Maser and published by . This book was released on 1994 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASSESSMENT EVALUATION OF STRUCTURE USING ADVANCED UNDISTRUCTIVE METHODS written by Dr. Ashad Ullah Qureshi and published by Concepts Books Publication. This book was released on 2022-06-01 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced and pre-stressed concrete are widely used for the construction of infrastructures such as bridges, industrial structures, buildings, etc. Most of the time, the quality of the concrete mix is assumed to be guaranteed but due to the congestion of reinforcement and the quality control exercised during placing and vibrating, honeycombs and voids are likely to be present in the hardened concrete. The presence of voids leads to the early deterioration of concrete and corrosion also sets in. The corrosion of reinforcement causes damage to the cover concrete and also section loss in the area of steel. In the case of pre-stressed concrete members, the corrosion leads to a catastrophic failure without any warning. Hence, it becomes necessary to evaluate the condition of concrete using Non Destructive Techniques (NDT) and Partially Destructive Techniques (PDT). The Ultrasonic Pulse Velocity (UPV) method which is widely adopted till now gives the relative quality and integrity of concrete and is based on the transit time. The rebound hammer gives the quality of concrete in the cover zone based on the rebound number.
Download or read book Investigation of a Non destructive System to Evaluation Critical Properties of Asphalt written by Robert L. Schmitt (Ph.D.) and published by . This book was released on 2013 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non destructive Measurement of Pavement Layer Thickness written by Kenneth R. Maser and published by . This book was released on 2003 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non Destructive Techniques for the Evaluation of Structures and Infrastructure written by Belén Riveiro and published by CRC Press. This book was released on 2016-04-04 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview and up-to-date synthesis of the most commonly used non-destructive technologies for the reverse engineering of built infrastructure facilities. These technologies tackle both the geometric and radiometric characterization of built structures, and thus, validated technologies such as laser scanning, photogrammetry, and
Download or read book Ground Penetrating Radar Study Phase I written by Waheed Uddin and published by . This book was released on 2006 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eleventh International Conference on the Bearing Capacity of Roads Railways and Airfields written by Inge Hoff and published by CRC Press. This book was released on 2021-11-10 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Road, Railway and Airfield Bearing Capacity – Volume 1 comprises the first part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.
Download or read book Civil Engineering Applications of Ground Penetrating Radar written by Andrea Benedetto and published by Springer. This book was released on 2015-04-07 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, based on Transport and Urban Development COST Action TU1208, presents the most advanced applications of ground penetrating radar (GPR) in a civil engineering context, with documentation of instrumentation, methods and results. It explains clearly how GPR can be employed for the surveying of critical transport infrastructure, such as roads, pavements, bridges and tunnels and for the sensing and mapping of underground utilities and voids. Detailed attention is also devoted to use of GPR in the inspection of geological structures and of construction materials and structures, including reinforced concrete, steel reinforcing bars and pre/post-tensioned stressing ducts. Advanced methods for solution of electromagnetic scattering problems and new data processing techniques are also presented. Readers will come to appreciate that GPR is a safe, advanced, non destructive and noninvasive imaging technique that can be effectively used for the inspection of composite structures and the performance of diagnostics relevant to the entire life cycle of civil engineering works.
Download or read book Non Destructive Assessment of Concrete Structures Reliability and Limits of Single and Combined Techniques written by Denys Breysse and published by Springer Science & Business Media. This book was released on 2012-01-21 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives information on non destructive techniques for assessment of concrete structures. It synthesizes the best of international knowledge about what techniques can be used for assessing material properties (strength) and structural properties (geometry, defects...). It describes how the techniques can be used so as to answer a series of usual questions, highlighting their capabilities and limits, and providing advices for a better use of techniques. It also focuses on possible combinations of techniques so as to improve the assessment. It is based on many illustrative examples and give in each case references to standards and guidelines.
Download or read book Advances in Human Factors Software and Systems Engineering written by Tareq Ahram and published by Springer. This book was released on 2017-06-10 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a platform for addressing human factors in software and systems engineering, both pushing the boundaries of current research and responding to new challenges, fostering new research ideas in the process. Topics include evolutionary and complex systems, human systems integration, smart grids and infrastructure, workforce training requirements, systems engineering education, and defense and aerospace. Based on the AHFE 2017 International Conference on Human Factors, Software, and Systems Engineering, held on July 17–21, 2017, Los Angeles, USA, this book is an inspiring guide for all researchers and professionals in the field of human factors, software and systems engineering.
Download or read book Materials and Infrastructures 1 written by Jean-Michel Torrenti and published by John Wiley & Sons. This book was released on 2016-06-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the first half of a diverse collection of chapters in the field of materials and infrastructures in transport systems, which illustrate the technological and methodological innovations required to rise to the challenge of building more sustainable transport infrastructures for the future. The authors explore the potential of these sustainable solutions to improve the performance and efficiency of materials and infrastructures, with a reduced environmental impact and lower cost. Theoretical and practical case studies address a variety of topics including circular economy and sustainability, the impacts of climate change, durability, lifecycle, auscultation and the monitoring of infrastructures. This book provides transport researchers and professionals with a better understanding of the current and future trends in these innovative fields, enabling them to put into practice new technologies and methods of design and management, so that new solutions can become current practices to truly improve modern transport systems.
Download or read book Theory and Computation of Electromagnetic Fields written by Jian-Ming Jin and published by John Wiley & Sons. This book was released on 2015-08-10 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the fundamental concepts behind the theory and computation of electromagnetic fields The book is divided in two parts. The first part covers both fundamental theories (such as vector analysis, Maxwell’s equations, boundary condition, and transmission line theory) and advanced topics (such as wave transformation, addition theorems, and fields in layered media) in order to benefit students at all levels. The second part of the book covers the major computational methods for numerical analysis of electromagnetic fields for engineering applications. These methods include the three fundamental approaches for numerical analysis of electromagnetic fields: the finite difference method (the finite difference time-domain method in particular), the finite element method, and the integral equation-based moment method. The second part also examines fast algorithms for solving integral equations and hybrid techniques that combine different numerical methods to seek more efficient solutions of complicated electromagnetic problems. Theory and Computation of Electromagnetic Fields, Second Edition: Provides the foundation necessary for graduate students to learn and understand more advanced topics Discusses electromagnetic analysis in rectangular, cylindrical and spherical coordinates Covers computational electromagnetics in both frequency and time domains Includes new and updated homework problems and examples Theory and Computation of Electromagnetic Fields, Second Edition is written for advanced undergraduate and graduate level electrical engineering students. This book can also be used as a reference for professional engineers interested in learning about analysis and computation skills.
