Download or read book Acceptance of Stay Cable Systems Using Prestressing Steels written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2005-01-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fib Recommendation gives technical guidelines regarding design, testing, acceptance, installation, qualification, inspection and maintenance of stay cable systems using prestressing steels (strands, wires or bars) as tensile elements, which can be applied internationally. This Recommendation is applicable for cable-stayed bridges and other suspended structures such as roofs. It may also be used for hangers in arch structures and as suspension cables, as appropriate. This Recommendations has been formulated by an international working group comprising more than 20 experts from administrative authorities, universities, laboratories, owners, structural designers, suppliers of prestressing steels and stay cable suppliers. The text has been written to cover best construction practices around the world, and to provide material specifications that are considered to be the most advanced available at the time of preparing this text. For ease of use (for client, designer and cable supplier), the complex content has been arranged thematically according to the system components into chapters focusing on performance characteristics, requirements and acceptance criteria. Requirements and comments have been specified for all parties involved in design and construction in order to aim for a uniform and high quality and durability. The interfaces to the structural designer are highlighted. The essential subjects are: Design and detailing of stay cables including saddles and damping devices Durability requirements and corrosion protection systems Requirements for the materials Testing requirements for the stay cables Installation, tolerances, qualification of companies and personnel Inspection, maintenance and repair. This Recommendation does not cover the technology of stay cables whose tensile elements are ropes, locked-coil cables, etc. or which consist of composite materials. Nevertheless, in many cases the specified performance criteria may also be applicable to these systems, although numerical values given for the acceptance criteria may need to be adjusted. For these systems it has been difficult to provide multiple protective layers similar to those specified for stay cables made from prestressing steel and therefore, the quality of corrosion protection may not be equivalent. While extradosed cables have similarities with stay cables, generally agreed design and system acceptance criteria are not yet available and therefore, this type of cable is not covered.
Download or read book Acceptance of stay cable systems using prestressing steels written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2019-03-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cable-stayed structures have become increasingly popular over the last 30 years and have been used in all parts of the world. Modern cable-stayed bridges have a history of over 50-years and have been constructed with span lengths ranging from 15 m to over 1000 m. Many long span cable-stayed bridges have been built for railway and highway traffic applications. Stay cables have also been used on pedestrian structures, many of which are architecturally striking and have become landmark structures. There is growing use in building structures, particularly for cable-supported roofs. Most of the cable supported structures have been in the form of cable-stayed bridges; but in recent years, extradosed bridges have seen increased popularity among the designers. Led by the experience in Japan, more than 200 extradosed bridges have been constructed worldwide in the past 15 years. The first edition of these fib recommendations was published as fib Bulletin 30 in 2005 and was the first specification published by fib for stay cable systems. This new bulletin has been updated based on Bulletin 30 with the aim to reflect the current state of the art and encompass the latest knowledge in cable systems. In addition, it has been the aspiration of Commission 5 and Task Group 5.5 to harmonize the guidance in this updated bulletin with other stay cable recommendations from around the world, including those from Europe, Japan and the USA. This new bulletin is intended to supersede and replace fib Bulletin 30. It is recommended that it be used in lieu of fib Bulletin 30 for all future cable supported applications. The updated bulletin introduces several significant enhancements to the specifications: These recommendations are applicable to both stay cable and extradosed cable applications. In the past, there has been some debate over the boundary between cable-stayed and extradosed bridges. This bulletin presents a new continuous approach valid for both. A completely new testing requirement to assess the performance of cable systems under bending fatigue, including both anchorages and saddles, if applicable, has been added. Testing requirements for saddle systems have been reformulated. In addition to the bending fatigue test noted above, new testing procedures for stay cable saddles with isolated tensile elements are introduced. This includes tests for saddle axial fatigue, friction and tensile testing, and determination of the effective saddle friction coefficient. Expanded system qualification, including requirements for both stay cable and extradosed applications. Includes new provisions for MTE qualification and additional load transferring connection devices. Minimum number of tests is specified for each. A new in-situ damping measurement test has been added to verify the actual damping ratio of the damping devices installed. By testing on site, selected cables may be excited to vibrate without and with the damping devices so that the observed vibration behaviour can be compared to the specified value. Other revisions have been made to reflect the current state of practice: Expanded quality control testing requirements Inclusion of epoxy-coated prestressing steel as a protection layer. Previous recommendations only considered zinc coatings. Specifications for epoxy coating material are given. Requirements for stainless steel components such as pipes, caps and plates Updated guidance for designing lightning protection systems Detailed recommendations for different levels of inspection of cable systems, including: initial, routine, detailed and exceptional inspections An updated list of references, relevant standards, and extended literature
Download or read book Acceptance of cable systems using prestressing steels written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2019-03-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cable-stayed structures have become increasingly popular over the last 30 years and have been used in all parts of the world. Modern cable-stayed bridges have a history of over 50-years and have been constructed with span lengths ranging from 15 m to over 1000 m. Many long span cable-stayed bridges have been built for railway and highway traffic applications. Stay cables have also been used on pedestrian structures, many of which are architecturally striking and have become landmark structures. There is growing use in building structures, particularly for cable-supported roofs. Most of the cable supported structures have been in the form of cable-stayed bridges; but in recent years, extradosed bridges have seen increased popularity among the designers. Led by the experience in Japan, more than 200 extradosed bridges have been constructed worldwide in the past 15 years. The first edition of these fib recommendations was published as fib Bulletin 30 in 2005 and was the first specification published by fib for stay cable systems. This new bulletin has been updated based on Bulletin 30 with the aim to reflect the current state of the art and encompass the latest knowledge in cable systems. In addition, it has been the aspiration of Commission 5 and Task Group 5.5 to harmonize the guidance in this updated bulletin with other stay cable recommendations from around the world, including those from Europe, Japan and the USA. This new bulletin is intended to supersede and replace fib Bulletin 30. It is recommended that it be used in lieu of fib Bulletin 30 for all future cable supported applications. The updated bulletin introduces several significant enhancements to the specifications: These recommendations are applicable to both stay cable and extradosed cable applications. In the past, there has been some debate over the boundary between cable-stayed and extradosed bridges. This bulletin presents a new continuous approach valid for both. A completely new testing requirement to assess the performance of cable systems under bending fatigue, including both anchorages and saddles, if applicable, has been added. Testing requirements for saddle systems have been reformulated. In addition to the bending fatigue test noted above, new testing procedures for stay cable saddles with isolated tensile elements are introduced. This includes tests for saddle axial fatigue, friction and tensile testing, and determination of the effective saddle friction coefficient. Expanded system qualification, including requirements for both stay cable and extradosed applications. Includes new provisions for MTE qualification and additional load transferring connection devices. Minimum number of tests is specified for each. A new in-situ damping measurement test has been added to verify the actual damping ratio of the damping devices installed. By testing on site, selected cables may be excited to vibrate without and with the damping devices so that the observed v vibration behaviour can be compared to the specified value. Other revisions have been made to reflect the current state of practice: Expanded quality control testing requirements Inclusion of epoxy-coated prestressing steel as a protection layer. Previous recommendations only considered zinc coatings. Specifications for epoxy coating material are given. Requirements for stainless steel components such as pipes, caps and plates Updated guidance for designing lightning protection systems Detailed recommendations for different levels of inspection of cable systems, including: initial, routine, detailed and exceptional inspections An updated list of references, relevant standards, and extended literature
Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall
Download or read book Bridge Safety Maintenance Management Life Cycle Resilience and Sustainability written by Joan Ramon Casas and published by CRC Press. This book was released on 2022-06-26 with total page 5491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability contains lectures and papers presented at the Eleventh International Conference on Bridge Maintenance, Safety and Management (IABMAS 2022, Barcelona, Spain, 11–15 July, 2022). This e-book contains the full papers of 322 contributions presented at IABMAS 2022, including the T.Y. Lin Lecture, 4 Keynote Lectures, and 317 technical papers from 36 countries all around the world. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to the main aspects of safety, maintenance, management, life-cycle, resilience, sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle, resilience, sustainability, standardization, analytical models, bridge management systems, service life prediction, structural health monitoring, non-destructive testing and field testing, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, needs of bridge owners, whole life costing and investment for the future, financial planning and application of information and computer technology, big data analysis and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on bridge safety, maintenance, management, life-cycle, resilience and sustainability of bridges for the purpose of enhancing the welfare of society. The volume serves as a valuable reference to all concerned with and/or involved in bridge structure and infrastructure systems, including students, researchers and practitioners from all areas of bridge engineering.
Download or read book Recommendations for acceptance and applications of post tensioning systems written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1981-03-01 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PCI Journal written by and published by . This book was released on 2006 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report on prestressed steel 2 anchorage and application of pretensioned 7 wire strands written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1978-06-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cable supported Bridges written by and published by . This book was released on 2001 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Maintenance Safety Management Life cycle Performance and Cost written by Paulo J. S. Cruz and published by CRC Press. This book was released on 2006 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM contains the full texts of the lectures and papers presented at IABMAS '06.
Download or read book Corrosion protection of prestressing steels written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1996-09-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendations for Stay Cable Design Testing and Installation written by Post-Tensioning Institute. Committee on Cable-Stayed Bridges and published by . This book was released on 2001 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published in SI units, and re-organized into a Load and Resistance Factor Design (LRED) format, designed to be used with the AASHTO LRED Bridge Design Code.
Download or read book Bridge Design Engineering written by and published by . This book was released on 2001 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the First International Conference on Steel Composite Structures written by Chang-Koon Choi and published by . This book was released on 2001 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report on Prestressing Steel written by Fédération internationale de la précontrainte. Commission on Prestressing Steels and Systems and published by . This book was released on 1978 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Engineering International written by and published by . This book was released on 2000 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surveyor and Municipal and County Engineer written by and published by . This book was released on 1955 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
