Download or read book Ab Initio Calculations written by Petr Carsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently quantum chemical ab initio calculations were re stricted to atoms and very small molecules. As late as in 1960 Allen l and Karo stated : "Almost all of our ab initio experience derives from diatomic LCAO calculations ••• N and we have found in the litera ture "approximately eighty calculations, three-fourths of which are for diatomic molecules ••• There are approximately twenty ab initio calculations for molecules with more than two atoms, but there is a decided dividing line between the existing diatomic and polyatomic wave functions. Confidence in the satisfactory evaluation of the many -center two-electron integrals is very much less than for the diatom ic case". Among the noted twenty calculations, SiH was the largest 4 molecule treated. In most cases a minimal basis set was used and the many-center two-electron integrals were calculated in an approximate way. Under these circumstances the ab initio calculations could hard ly provide useful chemical information. It is therefore no wonder that the dominating role in the field of chemical applications was played by semiempirical and empirical methods. The situation changed essentially in the next decade. The problem of many-center integrals was solved, efficient and sophisticated computer programs were devel oped, basis sets suitable for a given type of problem were suggested, and, meanwhile, a considerable amount of results has been accumulated which serve as a valuable comparative material. The progress was of course inseparable from the development and availability of computers.
Download or read book Quantum Mechanical Ab initio Calculation of the Properties of Crystalline Materials written by Cesare Pisani and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of general-purpose, reasonably accurate and well-tested ab-initio codes for crystals are discussed in this book. The aim is to expand competence of their application in material sciences and solid-state physics. The book addresses particularly readers with a general knowledge in quantum chemistry and intends to give a deeper insight into the special algorithms and computational techniques in ab-initio computer codes for crystals. Three different programs which are available to all interested potential users on request are presented.
Download or read book AB Initio Calculation of the Structures and Properties of Molecules written by Clifford E. Dykstra and published by Elsevier Publishing Company. This book was released on 1988 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a guide to the ab initio calculation of molecular structure and properties. It provides the necessary working information to enable the non-specialist to use and understand electronic structure methods and related computing technology, despite the high level of sophistication of quantum chemical methods. The initial chapters define and outline theoretical concepts, methods and computational approaches. Descriptive information and definitions of the terminology are given first; more detailed and mathematical explanations follow. These first chapters thus provide the background information needed to use the extensive literature of ab initio electronic structure theory. The next chapter first provides an overview of the technical issues relating to molecular properties, and then gives a rather detailed but general development. The latter part of this chapter is mainly intended for those first encountering the methodologies of properties determination and intending to pursue further developments. The other chapters provide reviews of calculations in the literature and assessments of factors influencing accuracy. The book is particularly useful to those who need a working understanding of ab initio calculations and well-suited to graduate students and researchers in computational and theoretical chemistry, researchers in electronic structure, spectroscopists and organic chemists.
Download or read book Computational Chemistry written by Errol G. Lewars and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational chemistry has become extremely important in the last decade, being widely used in academic and industrial research. Yet there have been few books designed to teach the subject to nonspecialists. Computational Chemistry: Introduction to the Theory and Applications of Molecular and Quantum Mechanics is an invaluable tool for teaching and researchers alike. The book provides an overview of the field, explains the basic underlying theory at a meaningful level that is not beyond beginners, and it gives numerous comparisons of different methods with one another and with experiment. The following concepts are illustrated and their possibilities and limitations are given: - potential energy surfaces; - simple and extended Hückel methods; - ab initio, AM1 and related semiempirical methods; - density functional theory (DFT). Topics are placed in a historical context, adding interest to them and removing much of their apparently arbitrary aspect. The large number of references, to all significant topics mentioned, should make this book useful not only to undergraduates but also to graduate students and academic and industrial researchers.
Download or read book Diatomic Molecules written by Robert Mulliken and published by Elsevier. This book was released on 2012-12-02 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diatomic Molecules: Results of Ab Initio Calculations provides the results obtained from quantum-mechanical calculations on the electronic structure of diatomic molecules. This six-chapter text also discusses the related concepts of ab initio calculation methods. This book considers first the primary methods used in the computation of molecular wave functions and of related properties. This topic is followed by discussions on the linear combination of atomic orbital and linear combination of mixed atomic orbital approximations and basis sets; electronic population analysis; spectroscopic transition probabilities; and the nature of chemical bonding. The remaining chapters examine the features of various theories that become prominent when two or more electrons are present, or are important in hydrides or homopolar and heteropolar molecules. This text will be of great value to organic and inorganic chemists and physicists.
Download or read book Ab Initio Molecular Orbital Calculations for Chemists written by William Graham Richards and published by Oxford University Press, USA. This book was released on 1983 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ab Initio Valence Calculations in Chemistry written by D. B. Cook and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ab Initio Valence Calculations in Chemistry describes the theory and practice of ab initio valence calculations in chemistry and applies the ideas to a specific example, linear BeH2. Topics covered include the Schrödinger equation and the orbital approximation to atomic orbitals; molecular orbital and valence bond methods; practical molecular wave functions; and molecular integrals. Open shell systems, molecular symmetry, and localized descriptions of electronic structure are also discussed. This book is comprised of 13 chapters and begins by introducing the reader to the use of the Schrödinger equation to solve the electronic structure of molecular systems. This discussion is followed by two chapters that describe the chemical and mathematical nature of orbital theories in quantum chemistry. Two general ways of using chemical and physical information in looking for approximate solutions of the Schrödinger equation are highlighted: model approximations and numerical approximations. Attention then turns to atomic orbitals as the basis of a description of molecular electronic structure; practical molecular wave functions; and a general strategy for performing molecular valence calculations. The final chapter examines the nature of the valence electronic structure by using invariance with respect to transformations among the occupied molecular orbitals and among the atomic orbitals. This text will be of interest to students and practitioners of chemistry, biochemistry, and quantum mechanics.
Download or read book Ab initio calculations written by and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Chemistry written by Jerzy Leszczynski and published by World Scientific. This book was released on 1996 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of recent progress in computational techniques as well as examples of the application of existing computational methods in different areas of chemistry, physics, and biochemistry. Introductory chapters cover a broad range of fundamental topics, including: state-of-the-art basis set expansion methods for computing atomic and molecular electronic structures based on the use of relativistic quantum mechanics; the most recent developments in Hartree-Fock methods, particularly in techniques suited for very large systems; the current analysis of the solute-solvent free energy of interaction and the physical bases used to evaluate the electrostatic, cavitation, and dispersion terms; an introduction to the additive fuzzy electron density fragmentation scheme within various ab initio Hartree-Fock quantum-chemical computational schemes, which has provided the means for generating representative molecular fragment densities characteristic to their local environment within a molecule. This book also features a review of recent ab initio calculations on the structure and interactions of DNA bases, a chapter on computational approaches to the design of safer drugs and their molecular properties, and a systematic conceptual study on a route which allows one to stuff fullerenes.
Download or read book Polyatomic Molecules written by Robert S. Mulliken and published by Elsevier. This book was released on 2012-12-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyatomic Molecules: Results of Ab Initio Calculations describes the symmetry of polyatomic molecules in ground states. This book contains 12 chapters that also cover the excited and ionized states of these molecules. The opening chapter describes the nature of the various ab initio computational methods. The subsequent four chapters deal with the three-atom systems, differing with respect to the number of hydrogen atoms in the molecules. These chapters also discuss the reaction surfaces of these systems. These topics are followed by discussions on the molecules whose ground states belong to relatively high, little or no symmetry groups. The concluding chapters explore the inorganic and relatively large organic molecules. These chapters also examine the ab initio calculations of molecular compounds and complexes, as well as hydrogen bonding and ion hydration. This text will be of great value to organic and inorganic chemists and physicists.
Download or read book Ab Initio Variational Calculations of Molecular Vibrational Rotational Spectra written by Debra J. Searles and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work had its beginnings in the early 1980s at the University ofWollongong, with significant contributions from Dr. Margret Hamilton, Professors Peter G. Burton and Greg Doherty. The emphasis was to develop computer code to solve the nuclear Schrodinger problem. For bent triatomic molecules the project was fmally realized at the University of Newcastle a decade or so later, with the contribution from Ms. Feng Wan g. Aspects of this work are now taught in the quantum mechanics and electron spectroscopy courses at The University of Newcastle. Even now "complete" ab initio solutions of the time-independent SchrOdinger equation is not commonplace for molecules containing four atoms or more. In fact, when using the Eckart-Watson nuclear Hamiltonian a further restriction needs to be imposed; that is, the molecule is restricted to undergoing small amplitudes of vibration. This Hamiltonian is useful for molecules containing massive nuclei and moreover, has been extremely useful in interpreting the rovibrational spectra of small molecules. Nevertheless, a number of nuclear Hamiltonians that do not embed an equilibrium geometry have become well established and are extremely successful in interpreting rovibrational spectra of floppy molecules. Furthermore, solution algorithms vary greatly from research group to research group and it is still unclear which aspects will survive the next decade. For example, even for a triatomic molecule a general form of a potential function has not yet been uncovered that will generally interpolate with accuracy and precision ab initio discrete surfaces.
Download or read book Comparison of Ab Initio Quantum Chemistry with Experiment for Small Molecules written by R.J. Bartlett and published by Springer Science & Business Media. This book was released on 1985-10-31 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the American Chemical Society meeting in Philadelphia, Pennsylvania, U.S.A., a symposium was organized entitled, "Comparison of Ab Initio Quantum Chemistry with Experiment: State-of-the-Art." The intent of the symposium was to bring together forefront experimen talists, who perform the types of clean, penetrating experiments that are amenable to thorough theoretical analysis, with inventive theore ticians who have developed high accuracy ab initio methods that are capable of competing favorably with experiment, to assess the current applicability of theoretical methods in chemistry. Contributions from many of those speakers (see Appendix A) plus others selected for their expertise in the subject are contained in this volume. Such a book is especially timely, since with the recent develop ment of new, more accurate and powerful ab initio methods coupled with the exceptional progress achieved in computational equipment, ab initio quantum chemistry is now often able to offer a third voice to resolve experimental discrepancies, assist essentially in the interpre tation of experiments, and frequently, provide quantitatively accurate results for molecular properties that are not available from experiment.
Download or read book Reviews in Computational Chemistry Volume 31 written by Abby L. Parrill and published by John Wiley & Sons. This book was released on 2018-11-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Reviews in Computational Chemistry series brings together leading authorities in the field to teach the newcomer and update the expert on topics centered on molecular modeling, such as computer-assisted molecular design (CAMD), quantum chemistry, molecular mechanics and dynamics, and quantitative structure-activity relationships (QSAR). This volume, like those prior to it, features chapters by experts in various fields of computational chemistry. Topics in Volume 31 include: Lattice-Boltzmann Modeling of Multicomponent Systems: An Introduction Modeling Mechanochemistry from First Principles Mapping Energy Transport Networks in Proteins The Role of Computations in Catalysis The Construction of Ab Initio Based Potential Energy Surfaces Uncertainty Quantification for Molecular Dynamics
Download or read book Compendium of Ab Initio Calculations of Molecular Energies and Properties written by Morris Krauss and published by . This book was released on 1967 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ab initio Calculation Tutorial written by Ryo Maezono and published by Springer Nature. This book was released on 2023-05-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the framework of first-principles analysis applied to materials using density functional theory (DFT). It provides a set of hands-on tutorials using the Quantum ESPRESSO package, an open-source software for DFT. The tutorials are well chosen, designed for maximum effectiveness while requiring a minimum of the reader’s time, and the book describes how the essential components are combined to create the practical applications based on the idea of modeling practical problems of materials. The book carefully explains how to prepare the platform to run the tutorials assisted by free software. This textbook is useful for students in experimental laboratories, for industrial researchers, and for those not majoring in theoretical studies but learning individually.
Download or read book Materials Modelling Using Density Functional Theory written by Feliciano Giustino and published by Oxford University Press, USA. This book was released on 2014 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explains the fundamental ideas of density functional theory, and how this theory can be used as a powerful method for explaining and even predicting the properties of materials with stunning accuracy.
Download or read book Ab Initio Calculations of Conformational Effects on 13C NMR Spectra of Amorphous Polymers written by R. Born and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: In NMR, it is well-known that the chemical shift conveys structural informa tion, e. g. a carbonyl carbon will have a resonance frequency appreciably dif ferent from a methyl carbon, etc. The relation between structure and chemical shift is mostly established by empirical rules on the basis of prior experience. It is only quite recently that the advent of both comparatively cheap comput ing power and novel quantum chemistry approaches have provided feasible routes to calculate the chemical shift at the ab initio level for molecules of reasonable size. This raises the question whether application of these novel theoretical concepts offers a means of obtaining new structural information for the complex chain molecules one deals with in polymer science. Solid state 13C-NMR spectra of glassy amorphous polymers display broad, partially structured resonance regions that reflect the underlying disorder of the polymer chains. The chemical shift responds to the variation of the ge ometry of the chain, and the broad resonance regions can be explained by an inhomogeneous superposition of various chain geometries (and thus chem ical shifts). In this review, we present a novel approach to combine polymer chain statistical models, quantum chemistry and solid state NMR to pro vide quantitative information about the local chain geometry in amorphous polymers. The statistical model yields the relative occurrence of the various geometries, and quantum chemistry (together with a force field geometry op timization) establishes the link between geometry and chemical shift.