Download or read book A Working Party Report on Sea Water Corrosion of Stainless Steels Mechanisms and Experiences written by European Federation of Corrosion and published by Woodhead Publishing Limited. This book was released on 1996 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at a workshop in 1995 organised by SINTEF Corrosion and Surface Technology (Trondheim) in co-operation with the EFC Working Parties on Marine Corrosion and Microbial Corrosion. Particular attention was given to biofilms, their causes, effects and prevention, as well as to the behaviour in seawater of high alloyed austenitic stainless steels including 6Mo, and super duplex stainless steels.
Download or read book A Working Party Report on Marine Corrosion of Stainless Steels written by and published by . This book was released on 1993 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by Liane Smith and published by CRC Press. This book was released on 2022-04-21 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the selection and qualification of corrosion resistant alloys for use in oil and gas field production facilities that handle raw and partly processed reservoir fluids at, and below, reservoir temperatures.
Download or read book Marine Corrosion of Stainless Steels written by D. Féron and published by CRC Press. This book was released on 2021-04-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is Number 33 of the Marine Corrosion of Stainless Steels, a publication of the European Federation of Corrosion (EFC). Part I of this volume on the "Marine Corrosion of Stainless Steels" consists of five chapters and is concerned with tests that were conducted in the 1990s on the corrosivity of European sea waters (Atlantic, Baltic, English Channel, Mediterranean, and North Sea) towards three types of stainless steels. Results from these two test programmes were presented at a European Workshop on Sea Water Corrosion of Stainless Steels in Trondheim in 1996 and at various corrosion conferences, mostly in Europe. The other four chapters in Part I describe experimental procedures, critical pitting temperature data, crevice corrosion results and results from the MAST biofilm studies. The remaining 23 chapters of the book are concerned with reviews and reports that develop the above topics.
Download or read book Illustrated Case Histories of Marine Corrosion written by European Federation of Corrosion and published by Woodhead Publishing Limited. This book was released on 1990 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide engineers with an elementary review of cases of corrosion damage which may occur during marine service and advise on possible remedial action.
Download or read book A Working Party Report on Marine Corrosion written by F. P. IJsseling and published by Routledge. This book was released on 1989 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics include factors affecting corrosion mechanisms, comparison of test results and performance of metallic alloys.
Download or read book Recommended Practice for Corrosion Management of Pipelines in Oil Gas Production and Transportation written by Bijan Kermani and published by CRC Press. This book was released on 2017-12-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Pipeline integrity is key to maintaining operational success, safety and security and minimising harm to the environment. Corrosion is a dominant contributory factor to failures, leaks and integrity threats in pipelines. Therefore, its optimum control within an integrity management framework is paramount for the cost-effective design of facilities and ensuring continued, uninterrupted and safe operations within the expected design life. This recommended practice (RP) is a compendium of current best practices and state-of-the-art knowledge by major operators, engineering contractors and service companies involved in hydrocarbon pro-duction and transportation. The RP incorporates some minimum operational requirements and practices to ensure that when man-aging corrosion in pipelines, fundamental principles are followed. It covers management of corrosion for pipelines carrying hydrocarbons, injection water and/or produced water from design to decommissioning. It is structured to follow the logical steps of a basic corrosion management process and makes references to relevant and available international standards and/or recommended practices. It is intended for use by personnel from the petroleum industry having knowledge of corrosion and materials. It is hoped that this RP will prove to be a key reference document for engineers, suppliers and con-tractors working in the oil and gas industry, paving the way for corrosion-free operation of pipelines with the ultimate goal of improving safety, security and minimising the impact on the environment
Download or read book Corrosion Performance of Metals for the Marine Environment EFC 63 written by Roger Francis and published by CRC Press. This book was released on 2019-05-14 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers with an interest in the marine environment can take advantage of many years of accumulated corrosion experience in a quick and concise manner with this publication. It covers the corrosion behavior in sea water of steel, stainless steel and cast iron as well as alloys of copper, aluminum, nickel and titanium. Applications, commonly-used alloy compositions and mechanical properties are also covered for each alloy system, plus a special section is devoted to galvanic corrosion and its avoidance.
Download or read book Marine Corrosion of Stainless Steels written by European Federation of Corrosion and published by CRC Press. This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Working Parties on Marine Corrosion & Microbial Corrosion) Contents include: aspects of marine corrosion and testing for seawater applications; experience with seawater chlorination on copper alloys and stainless steels; an intelligent probe for in-situ assessment of the susceptibility of hydrogen induced cracking of steel for offshore platform joints.
Download or read book Understanding Biocorrosion written by T Liengen and published by Elsevier. This book was released on 2014-11-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocorrosion refers to corrosion influenced by bacteria adhering to surfaces in biofilms. Biocorrosion is a major problem in areas such as cooling systems and marine structures where biofilms can develop. This book summarises key recent research in this subject. Part one looks at theories of biocorrosion and measurement techniques. Part two discusses how bacteria and biofilms result in biocorrosion. The final part of the book includes case studies of biocorrosion in areas as diverse as buildings, fuels, marine environments and cooling systems. Provides a detailed overview of biocorrosion and the different scientific and/or industrial problems related to microbially induced corrosion Introduces a variety of investigative techniques and methodologies that are employed in diagnosing and evaluating microbially induced corrosion Includes case studies on: biodeterioration of building materials; biocorrosion issues associated with diesel and biofuels; marine biocorrosion; corrosion of open recirculating cooling water systems and cooling system components; the effect of H2S on steel corrosion
Download or read book A Working Party Report on Corrosion Resistant Alloys for Oil and Gas Production written by European Federation of Corrosion and published by CRC Press. This book was released on 2002 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and updated set of guidelines applicable to stainless steels, nickel alloys and titanium alloys covering: SSC/SCC test procedures; reference environments for SSC and SCC testing; guidance on autoclave testing of CRAs; procedures for testing CRAs exposed to sulphur and H2S.
Download or read book Corrosion by Carbon and Nitrogen written by H Grabke and published by Elsevier. This book was released on 2014-01-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal dusting is a form of corrosion involving the disintegration of metals and alloys into a dust of graphite and metal particles when exposed to a carburizing atmosphere. This important book reviews the factors affecting metal dusting and how it can be prevented in sectors such as the chemical and petrochemical industries and in the direct reduction of iron ores. It also considers the related corrosion phenomena of carburization and nitridation. After an introductory chapter setting out the key processes involved in metal dusting, the book reviews how this corrosion process affects a range of metals such as iron and steel, as well as nickel-based and chromium-based high-temperature alloys. There are chapters on the effects of particular gas mixtures on the corrosion process and on the use of coatings to prevent metal dusting. Processes involved in carburization and nitridation are also described and discussed. With its distinguished editors and team of contributors, Corrosion by carbon and nitrogen is a valuable reference for all those concerned with understanding and preventing these corrosion processes in various industries. Reviews this corrosion process and how it affects the petrochemical and other industries Discusses the effect of particular gas mixtures on the corrosion process
Download or read book The Use of Electrochemical Scanning Tunnelling Microscopy EC STM in Corrosion Analysis written by R Lindstrom and published by Woodhead Publishing. This book was released on 2006-11-30 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Federation of Corrosion’s Working Party on Surface Science and the Mechanisms of Corrosion and Protection (EFC WP6) has defined, as one of its objectives, the development of a reference material and reference guidelines for the application of electrochemical scanning tunnelling microscopy (EC-STM) in corrosion science. The use of EC-STM to study the relationship between surface structure and surface reactivity in situ on electrodes in contact with an electrolyte is of major importance in corrosion research. This report describes the reference material and procedural guidelines required to use this technique effectively. STM-users are instructed how to obtain high resolution data on a carefully prepared copper single-crystal surface. Describes the reference material and procedural guidelines required to use this technique effectively Discusses an area of major importance in corrosion research
Download or read book Corrosion of Reinforcement in Concrete written by M Raupach and published by Woodhead Publishing. This book was released on 2014-01-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the widespread use of reinforced concrete in infrastructure, understanding the corrosion of this material is of major importance. As a result there has been a wealth of research into catalysts, inhibitors and effective means of monitoring the rate of corrosion. Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques summarises some of the most significant research and its implications.The book begins by reviewing findings from various experiments designed to test the corrosion rate of metals induced by a range of factors. Later chapters discuss techniques for monitoring and testing for corrosion. The book concludes by assessing important methods of prevention, including corrosion inhibitors, protective coatings and electrochemical methods for protection, together with rehabilitation procedures for susceptible structures.Filled with practical examples and written by a distinguished team of international contributors, Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques is an essential reference for civil engineers using reinforced concrete. Summarises research into catalysts, inhibitors and effective means of monitoring the rate of corrosion Concludes by assessing important methods of prevention
Download or read book Sulphur Assisted Corrosion in Nuclear Disposal Systems written by Damien Féron and published by CRC Press. This book was released on 2020-11-26 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the different disposal concepts for high-level nuclear waste, corrosion of the metallic barriers and in particular the overpack/container is a major issue. It is imperative for performance assessment to predict the lifetime of these containers. In the lifetime prediction of metallic barriers for the disposal of high level nuclear waste (HLW) or of spent fuel, the presence of (reduced) sulphur species is an issue of growing importance, as the sulphur species are involved in localised corrosion phenomena. The international workshop on Sulphur-Assisted Corrosion in Nuclear Waste Disposal Systems (SACNUC2008) aimed to provide an exchange of information on the influence of sulphur species on the corrosion of metallic barriers. This workshop was a co-organisation of the Belgian Nuclear Research Centre, SCK*CEN, and the Belgian Agency for the Management of Radioactive Waste and Enriched Fissile Materials, ONDRAF/NIRAS, under the auspices of the European Federation of Corrosion (EFC event N 311). The proceedings are divided into five chapters: Chapter 1 provides a general overview of the disposal concepts of nuclear waste and the role of corrosion. Chapter 2 explains the mechanism of sulphur-induced corrosion processes. This chapter also contains information from outside the nuclear disposal field in which sulphur is known to act as a detrimental factor (e.g. oil and gas industry). Chapter 3 addresses the role of microbial processes in sulphur-assisted corrosion. Chapter 4 covers the modelling of sulphide-assisted corrosion. Chapter 5 is devoted to a panel discussion aiming to identify open issues in the investigation of sulphur-assisted corrosion phenomena and how to incorporate these in robust lifetime prediction of metallic barriers.
Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-08-22 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 Discusses the standard approach to risk based inspection methodology Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset Includes a wide array of concepts of corrosion mitigation
Download or read book Amine Unit Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2007-04-18 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA), diethanolamine (DEA), monoethanolamine (MEA) and di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability. Covers such amine types as Methyl Diethanolamine (MDEA) and Di-isopropanolamine Makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability
