Download or read book A Working Model for the System Alumina Magnesia written by Richard A. Reinhardt and published by . This book was released on 1983 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: For treatment of internal explosions in the presence of both Mg and Al metals, it was necessary to devise a working model for the system magnesia-alumina. From the parameters of the model it was then possible to estimate equilibrium and internal-energy data for the various chemical species present in the oxide system, both in solid and liquid phases, for use in the blast computations. The solid phases, in agreement with published phase diagrams, consist of: a magnesia phase, in which a small amount of spinel (magnesium aluminate) dissolves; a spinel phase in which either magnesia or alumina is soluable to a considerable extent; and a pure alumina phase. The solid phases were treated by the methods of the thermodynamics of non-ideal solutions. The melt was assumed to contain chemically reasonable ions, plus unionized MgO, and to behave as an ideal solution. The parameters of the model were adjusted to give the most satisfactory fit to the known phase diagram. It is emphasized that the model does not purport to be an actual explanation of the structure of the system. (Author).
Download or read book A study of densification in vacuum in the alumina magnesia system written by Chester M Ringel and published by . This book was released on 1963 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Circular written by United States. National Bureau of Standards and published by . This book was released on 1927 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essential Readings in Magnesium Technology written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of the best papers in the history of Magnesium Technology, a definitive annual reference in the field of magnesium production and related light metals technologies. The volume contains a strong topical mix of application and fundamental research articles on magnesium technology. Section titles: 1.Magnesium Technology History and Overview 2.Electrolytic and Thermal Primary Production 3.Melting, Refining, Recycling, and Life-Cycle Analysis 4.Casting and Solidification 5.Alloy and Microstructural Design 6.Wrought Processing 7.Modeling and Simulation 8.Joining 9.Corrosion, Surface Treatment, and Coating
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium Technology 2015 written by Michele Manuel and published by Springer. This book was released on 2016-12-26 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2015 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Aluminum and Magnesium written by and published by . This book was released on 1953 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum and Magnesium Metal Matrix Nanocomposites written by Lorella Ceschini and published by Springer. This book was released on 2016-10-18 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book looks into the recent advances in the ex-situ production routes and properties of aluminum and magnesium based metal matrix nanocomposites (MMNCs), produced either by liquid or semi-solid state methods. It comprehensively summarizes work done in the last 10 years including the mechanical properties of different matrix/nanoreinforcement systems. The book also addresses future research direction, steps taken and missing developments to achieve the full industrial exploitation of such composites. The content of the book appeals to researchers and industrial practitioners in the area of materials development for metal matrix nanocomposites and its applications.
Download or read book Magnesia Alumina Beryllia Ceramics Fabrication Characterization and Properties written by Allen Alper and published by Elsevier. This book was released on 2012-12-02 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Oxides, Magnesia, Alumina, Beryllia Ceramics: Fabrication, Characterization and Properties is the third part of a series of four books on high temperature oxides. This text is divided into five chapters that deal with the research and technical advances in selected refractory oxides, such as magnesia, alumina, and beryllium oxide. Chapter 1 discusses the preparation, characterization, thermal and mechanical properties, and application to the electrical and electronic fields of beryllium oxide. Chapter 2 examines the mechanical behavior of single crystals of magnesia, including its dislocation motion and interactions, and crack nucleation and growth. Chapter 3 describes the significance of diffusive and mechanical properties of sintered alumina and magnesia. Chapter 4 deals with the process mechanisms, control, and limitations of hot-pressing, with particular emphasis on the practical applications of hot-pressed refractory oxides. Chapter 5 explores the possible benefits of hot-working, operational processes involved in such working, and the applications of fabricated oxides. This book is of great value to engineers, materials scientists, and students with advanced materials science courses.
Download or read book Corrosion Resistance of Aluminum and Magnesium Alloys written by Edward Ghali and published by John Wiley & Sons. This book was released on 2010-05-05 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable information on corrosion fundamentals and applications of aluminum and magnesium Aluminum and magnesium alloys are receiving increased attention due to their light weight, abundance, and resistance to corrosion. In particular, when used in automobile manufacturing, these alloys promise reduced car weights, lower fuel consumption, and resulting environmental benefits. Meeting the need for a single source on this subject, Corrosion Resistance of Aluminum and Magnesium Alloys gives scientists, engineers, and students a one-stop reference for understanding both the corrosion fundamentals and applications relevant to these important light metals. Written by a world leader in the field, the text considers corrosion phenomena for the two metals in a systematic and parallel fashion. The coverage includes: The essentials of corrosion for aqueous, high temperature corrosion, and active-passive behavior of aluminum and magnesium alloys The performance and corrosion forms of aluminum alloys The performance and corrosion forms of magnesium alloys Corrosion prevention methods such as coatings for aluminum and magnesium Electrochemical methods of corrosion investigation and their application to aluminum and magnesium alloys Offering case studies and detailed references, Corrosion Resistance of Aluminum and Magnesium Alloys provides an essential, up-to-date resource for graduate-level study, as well as a working reference for professionals using aluminum, magnesium, and their alloys.
Download or read book Magnesium Technology written by Horst E. Friedrich and published by Springer Science & Business Media. This book was released on 2006 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors present the current state of both research and technological application of magnesium. In particular, casting and wrought alloys are presented in Chapter 5, followed by a large chapter dedicated to fabrication methods. Corrosion and Protection are treated in Chapter 7. Chapter 8 discusses Engineering Requirements, Strategies and Examples for automobiles in Europe, USA, Asia and Pacific and also for Aerospace and Consumer Articles. Chapter 10 is dedicated to recycling. The experience of authors from seven countries has been combined to produce this book. The book addresses materials researchers as well as design engineers. TOC:Introduction.- History.- Production Technologies.- Physical Metallurgy.- Melting, Alloying and Refining.- Alloys of Practical Importance.- Fabrication Methods.- Corrosion and Surface Protection.- Engineering Requirements, Strategies and Examples.- Recycling.- Data Sheet.
Download or read book Die Cast Engineering written by William Andresen and published by CRC Press. This book was released on 2004-11-29 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A frequently misunderstood technology, die casting is considered the shortest route between raw material and near net shape. For many decades, high pressure die casting was viewed as an art based upon "seat of the pant" strategies. However, many of these crude reactions actually worked because the fundamental process is quite forgiving of eccentric
Download or read book The Binary Systems of Alumina with Silica Lime and Magnesia written by Fred Eugene Wright and published by . This book was released on 1909 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Steel Division B Copper Division C Aluminum and Magnesium Division written by United States. War Production Board and published by . This book was released on 1947 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium Technology 2011 written by Wim Sillekens and published by Springer. This book was released on 2016-12-10 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Void Formation and Grain Boundary Sliding in Aluminum magnesium Solid Solution Alloys written by Arthur W. Mullendore and published by . This book was released on 1960 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Magnesium Alloys Containing Nickel Manganese Lithium and Aluminium written by J. A. Rowland and published by . This book was released on 1956 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
