Download or read book A Survey of Computer aided design and Analysis Programs written by University of South Florida. Electrical & Electronic Systems Department and published by . This book was released on 1976 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains a survey of sixteen computer aided design programs useful for electronic circuit analysis. Most of the well known, first generation programs (such as ECAP) were not included in this survey. These older programs can no longer compete with the second and third generation nonlinear, sophisticated programs. However, some of the lesser known European linear programs were included, as a matter of information only. It is divided into three major parts. Part 1 contains general data on each program along with a summary of each of the user's manuals. This part of the report is prefixed by four tables which summarize the properties of all the programs. Part 2 of the report contains a critical analysis of each of the programs. The eighteen circuits given in the appendix were the basis upon which flexibility, accuracy, and cost comparisons were made. Part 3 contains a comparison analysis of all the programs and conclusions which may be known from the results of this survey. As a result of some of the advanced publicity concerning this survey, several individuals brought to our attention programs which were not being included. Some of these do look promising, but were unknown and unpublished, hence there was no realistic way to have found out about them in time. (Author).
Download or read book Computer Aided Design written by C. S. Krishnamoorthy and published by . This book was released on 1991 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Computer aided design in Analysis Programs written by Brenda L. Connor and published by . This book was released on 1982 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design written by C. S. Krishnamoorthy and published by Alpha Science International, Limited. This book was released on 2005 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprised of three sections; Programming, Applications and Software Development, this second edition introduces new developments such as Soft Computing and Object-Oriented Programming.
Download or read book Computer Aided Analysis and Design written by Srinivasa Prakash Regalla and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has all the details required for the complete coverage of either undergraduate level or graduate level course on Computer Aided Design for mechanical engineers, design engineers and civil and architectural engineers. Emphasis has been laid on explaining the concepts and techniques more from the practical and implementation standpoint so that the reader can begin hands-on and to enable the reader to write his own programs and design CAD systems for any mechanical element. Each chapter has a large number of solved and unsolved exercise problems. The book is complemented by several open ended projects, topics as well as partial details of solution, in all the chapters. Close knitting among the geometric modeling, computer aided engineering and applications such as rapid prototyping is a special feature of this book. Spread in two parts containing 11 chapters the book broadly covers: " Background of the CAD systems. " Curve, surface and solid modeling techniques " Rapid prototyping technology. " Fundamental techniques of computer aided engineering " Fundamentals of mechanical systems " Numerical techniques for analysis of mechanical systems " Finite difference method and finite element method.
Download or read book Computer Aided Design Techniques written by E. Wolfendale and published by Butterworth-Heinemann. This book was released on 2014-05-15 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-aided Design Techniques deals with the tools used in computer-aided design, problems associated with software development for design, and techniques applied in the development of the REDAC system. The book covers topics such as program design, requirements of a program for general use, and representation of the circuit in a computer; device modeling, general linear modeling, and linear and non-linear transistor modeling; and non-linear transient analysis. Also covered are topics such as layout capacitances and inductances computation; the use of graphic display as a drawing aid for circuit layout; and the writing of design programs. The text is recommended for engineers and physicists who would like to know how computers can aid them in design, as well as computer experts who aim to write programs intended for design.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer aided Design and Drafting Systems written by George Korte and published by Transportation Research Board. This book was released on 1990 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to administrators, designers, computer personnel, and others interested in the operation and management of computer-aided design and drafting (CADD) systems. Information is provided on selection and implementation of CADD systems, current use in state departments of transportation (DOTs), and issues involved in managing a CADD system and CADD operators. Most state DOTs either have or plan to acquire CADD systems to improve their design, drafting, and mapping operations. This report of the Transportation Research Board describes the processes for selecting and implementing a CADD system, current practices of state DOTs in applying and using CADD, and training and performance issues with respect to CADD personnel.
Download or read book Elements of Computer Aided Design and Manufacturing written by Y. C. Pao and published by . This book was released on 1984 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact, up-to-date survey of CAD/CAM software and hardware presents the principles of interactive graphics and discusses the essential elements of computer-aided design and manufacturing. It contains numerous examples in both BASIC and FORTRAN languages, which can be run on the Tektronix 4050 series, IBM PC, Apple II, TRS-80, and other computer graphics systems.
Download or read book Computer Aided Design in Control Systems 1988 written by Zhen-Yu Chen and published by Elsevier. This book was released on 2017-05-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 73 papers, presenting the state of the art in computer-aided design in control systems (CADCS). The latest information and exchange of ideas presented at the Symposium illustrates the development of computer-aided design science and technology within control systems. The Proceedings contain six plenary papers and six special invited papers, and the remainder are divided into five themes: CADCS packages; CADCS software and hardware; systems design methods; CADCS expert systems; CADCS applications, with finally a discussion on CADCS in education and research.
Download or read book Computer Aided Design of Control Systems written by Michel A. Cuénod and published by Pergamon. This book was released on 1980 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and analysis methods for plants, controllers and control systems; Program packages and programming languages for design purposes; Computer assisted planning; CAD in research, development and instruction; Applications; Lata papers; Survey papers; Round table discussions.
Download or read book Computer Aided Design written by J. Encarnacao and published by Springer. This book was released on 2012-01-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4 lation and optimization. These are essential constituents of the iterative process, leading to a feasible and, one hopes, optimal design. 1.3 Content of the Book In Chapter 2 we present briefly the history of CAD. The main components of CAD systems are identified, and their principal functions described. Economi cal and interdisciplinary aspects are discussed. Chapter 3 starts with a systems analysis of the design process. The notion of a process is introduced as a fundamental tool to describe activities like design as a whole, computer-aided design, program executions, terminal sessions etc. The environment and the resources which the environment must supply for the successful execution of any process are discussed. The problem of modelling the design objects in an abstract schema and the interrelation between the schema and the planning of the individual step in the design are analysed. Chapter 4 concentrates on the interfaces among the components of a CAD system, including the human operator. The problem of mapping an abstract schema onto the capabilities of various programming, command, or data de scription languages is described in detail. Emphasis is laid upon the resource aspect and its influence on the design of CAD systems. The concept of a CAD software machine is introduced, and rules for designing such machines are given.
Download or read book Computer Aided Geometric Design written by Robert E. Barnhill and published by Academic Press. This book was released on 2014-05-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Geometric Design covers the proceedings of the First International Conference on Computer Aided Geometric Design, held at the University of Utah on March 18-21, 1974. This book is composed of 15 chapters and starts with reviews of the properties of surface patch equation and the use of computers in geometrical design. The next chapters deal with the principles of smooth interpolation over triangles and without twist constraints, as well as the graphical representation of surfaces over triangles and rectangles. These topics are followed by discussions of the B-spline curves and surfaces; mathematical and practical possibilities of UNISURF; nonlinear splines; and some piecewise polynomial alternatives to splines under tension. Other chapters explore the smooth parametric surfaces, the space curve as a folded edge, and the interactive computer graphics application of the parametric bi-cubic surface to engineering design problems. The final chapters look into the three-dimensional human-machine communication and a class of local interpolating splines. This book will prove useful to design engineers.
Download or read book Computer Aided Design written by Jose L. Encarnacao and published by Springer. This book was released on 1990-11-02 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2 e This book describes principles, methods and tools that are common to computer applications for design tasks. CAD is considered in this book as a discipline that provides the required know-how in computer hardware and software, in systems analysis and in engineering methodology for specifying, designing, implementing, introducing, and using computer based systems for design purposes. The first chapter gives an impression of the book as a whole, and following chapters deal with the history and the components of CAD, the process aspect of CAD, CAD architecture, graphical devices and systems, CAD engineering methods, CAD data transfer, and application examples. The flood of new developments in the field and the success of the first edition of this book have led the authors to prepare this completely revised, updated and extended second edition. Extensive new material is included on computer graphics, implementation methodology and CAD data transfer; the material on graphics standards is updated. The book is aimed primarily at engineers who design or install CAD systems. It is also intended for students who seek a broad fundamental background in CAD.
Download or read book Computer Aided Design and Manufacture written by C. B. Besant and published by Ellis Horwood. This book was released on 1980 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design written by Wilson R Nyemba and published by CRC Press. This book was released on 2022-12-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprehensively discusses principles, techniques, research activities, applications and case studies of computer-aided design in a single volume. The textbook will serve as ideal study material for undergraduate, and graduate students in a multitude of engineering disciplines. The book: Discusses techniques for wireframe, surface and solid modelling including practical cases and limitations Each chapter contains solved examples and unsolved exercises Includes research case studies and practical examples in enabling the user to link academic theory to engineering practice Highlights the ability to convert graphic to non-graphic information such as in drawing up bills of materials in practice Discusses important topics including constructive solid geometry, Boolean operations on solid primitives and Boolean algebra This text covers different aspects of computer-aided design, from the basic two-dimensional constructions through modifications, use of layers and dimensioning to advanced aspects such as three-dimensional modelling and customization of the package to suit different applications and disciplines. It further discusses important concepts including orthographic projections, isometric projections, 3D wireframe modelling, 3D surface modelling, solids of extrusion and solids of revolution. It will serve as ideal study material for undergraduate, and graduate students in the fields of mechanical engineering, industrial engineering, electrical and electronic engineering, civil and construction engineering, aerospace engineering and manufacturing engineering.
Download or read book StarBriefs Plus written by Andre Heck and published by Springer Science & Business Media. This book was released on 2004-04-30 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: With about 200,000 entries, StarBriefs Plus represents the most comprehensive and accurately validated collection of abbreviations, acronyms, contractions and symbols within astronomy, related space sciences and other related fields. As such, this invaluable reference source (and its companion volume, StarGuides Plus) should be on the reference shelf of every library, organization or individual with any interest in these areas. Besides astronomy and associated space sciences, related fields such as aeronautics, aeronomy, astronautics, atmospheric sciences, chemistry, communications, computer sciences, data processing, education, electronics, engineering, energetics, environment, geodesy, geophysics, information handling, management, mathematics, meteorology, optics, physics, remote sensing, and so on, are also covered when justified. Terms in common use and/or of general interest have also been included where appropriate.
