Download or read book A Study on Fibre Reinforced Concrete Involving Nano Alumina and Zeolite written by Sala Gayathri and published by International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. This book was released on 2022-06-22 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper presents the results of a research study carried out on ternary blended concrete containing Nano Alumina (NA), Zeolite and Polypropylene fibres (PPF). The optimum combination of Nano Alumina and Zeolite has been arrived at using standard procedures from the point of view of mobility and strength. The optimum combination has been found to be 1% Nano Alumina and 10% Zeolite. Polypropylene fibre has been added in different volume fractions (0.1, 0.2 & 0.3%) to examine its impact on the mechanical properties of concrete involving Nano alumina, Zeolite. Compressive Strength, indirect tensile strength, flexural strength and elastic modulus for the above concrete mixture have been found using appropriate specimens such as cube, cylinder and prism following the standard test protocols. The results indicated that the addition of 0.3% polypropylene fibres increased compressive strength by 19.33%, increased split tensile strength by 66.26%, increased flexural strength by 26.15%, and increased modulus elasticity by 16.13%.
Download or read book Articles in ITJEMAST 13 9 2022 written by and published by International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies. This book was released on with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published articles in ITJEMAST 13(9) 2022
Download or read book Sandwich Composites written by Senthilkumar Krishnasamy and published by CRC Press. This book was released on 2022-01-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A composite sandwich panel is a hybrid material made up of constituents such as a face sheet, a core, and adhesive film for bonding the face sheet and core together. Advances in materials have provided designers with several choices for developing sandwich structures with advanced functionalities. The selection of a material in the sandwich construction is based on the cost, availability, strength requirements, ease of manufacturing, machinability, and post-manufacturing process requirements. Sandwich Composites: Fabrication and Characterization provides insights into composite sandwich panels based on the material aspects, mechanical properties, defect characterization, and secondary processes after the fabrication, such as drilling and repair. FEATURES Outlines existing fabrication methods and various materials aspects Examines composite sandwich panels made of different face sheets and core materials Covers the response of composite sandwich panels to static and dynamic loads Describes parameters governing the drilling process and repair procedures Discusses the applications of composite sandwich panels in various fields Explores the role of 3D printing in the fabrication of composite sandwich panels Due to the wide scope of the topics covered, this book is suitable for researchers and scholars in the research and development of composite sandwich panels. This book can also be used as a reference by professionals and engineers interested in understanding the factors governing the material properties, material response, and the failure behavior under various mechanical loads.
Download or read book Handbook of Natural Zeolites written by Vassilis J. Inglezakis and published by Bentham Science Publishers. This book was released on 2012-08-09 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Handbook of Natural Zeolites provides a comprehensive and updated summary of all important aspects of natural zeolites science and technology. The e-book contains four sections covering the relevant scientific background, established technologies, recent "
Download or read book Alkali Activated Materials written by John L. Provis and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a State of the Art Report resulting from the work of RILEM Technical Committee 224-AAM in the period 2007-2013. The Report summarises research to date in the area of alkali-activated binders and concretes, with a particular focus on the following areas: binder design and characterisation, durability testing, commercialisation, standardisation, and providing a historical context for this rapidly-growing research field.
Download or read book Nanotechnology in Eco Efficient Construction written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2013-04-04 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the environmental impact of existing construction and building materials comes under increasing scrutiny, the search for more eco-efficient solutions has intensified. Nanotechnology offers great potential in this area and is already being widely used to great success. Nanotechnology in eco-efficient construction is an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction. Following an introduction to the use of nanotechnology in eco-efficient construction materials, part one considers such infrastructural applications as nanoengineered cement-based materials, nanoparticles for high-performance and self-sensing concrete, and the use of nanotechnology to improve the bulk and surface properties of steel for structural applications. Nanoclay-modified asphalt mixtures and safety issues relating to nanomaterials for construction applications are also reviewed before part two goes on to discuss applications for building energy efficiency. Topics explored include thin films and nanostructured coatings, switchable glazing technology and third generation photovoltaic (PV) cells, high-performance thermal insulation materials, and silica nanogel for energy-efficient windows. Finally, photocatalytic applications are the focus of part three, which investigates nanoparticles for pollution control, self-cleaning and photosterilisation, and the role of nanotechnology in manufacturing paints and purifying water for eco-efficient buildings. Nanotechnology in eco-efficient construction is a technical guide for all those involved in the design, production and application of eco-efficient construction materials, including civil engineers, materials scientists, researchers and architects within any field of nanotechnology, eco-efficient materials or the construction industry. Provides an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction Examines the use of nanotechnology in eco-efficient construction materials Considers a range of important infrastructural applications, before discussing applications for building energy efficiency
Download or read book Cement and Concrete Chemistry written by Wieslaw Kurdowski and published by Springer Science & Business. This book was released on 2014-04-24 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes cement clinker formation. It covers multicomponent systems, clinker phase structures and their reactions with water, hydrate composition and structure, as well as their physical properties. The mineral additions to cement are described as are their influence on cement-paste properties. Special cements are also discussed. The microstructure of concrete is then presented, and special emphasis is given to the role of the interfacial transition zone, and the corrosion processes in the light of cement-phase composition, mineral additions and w/c ratio. The admixtures' role in modern concrete technology is described with an emphasis on superplasticizer chemistry and its cement-paste rheological modification mechanism. Cement with atypical properties, such as calcium aluminate, white, low energy and expansive cements are characterized. The last part of the book is devoted to special types of concrete such as self compacting and to reactive powders.
Download or read book Geopolymers written by J L Provis and published by Elsevier. This book was released on 2009-06-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: A geopolymer is a solid aluminosilicate material usually formed by alkali hydroxide or alkali silicate activation of a solid precursor such as coal fly ash, calcined clay and/or metallurgical slag. Today the primary application of geopolymer technology is in the development of reduced-CO2 construction materials as an alternative to Portland-based cements. Geopolymers: structure, processing, properties and industrial applications reviews the latest research on and applications of these highly important materials.Part one discusses the synthesis and characterisation of geopolymers with chapters on topics such as fly ash chemistry and inorganic polymer cements, geopolymer precursor design, nanostructure/microstructure of metakaolin and fly ash geopolymers, and geopolymer synthesis kinetics. Part two reviews the manufacture and properties of geopolymers including accelerated ageing of geopolymers, chemical durability, engineering properties of geopolymer concrete, producing fire and heat-resistant geopolymers, utilisation of mining wastes and thermal properties of geopolymers. Part three covers applications of geopolymers with coverage of topics such as commercialisation of geopolymers for construction, as well as applications in waste management.With its distinguished editors and international team of contributors, Geopolymers: structure, processing, properties and industrial applications is a standard reference for scientists and engineers in industry and the academic sector, including practitioners in the cement and concrete industry as well as those involved in waste reduction and disposal. Discusses the synthesis and characterisation of geopolymers with chapters covering fly ash chemistry and inorganic polymer cements Assesses the application and commercialisation of geopolymers with particular focus on applications in waste management Reviews the latest research on and applications of these highly important materials
Download or read book Nanobiosensors written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-09-28 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiosensors: Nanotechnology in the Agri-Food Industry, Volume 8, provides the latest information on the increasing demand for robust, rapid, inexpensive, and safe alternative technologies that monitor, test, and detect harmful or potentially dangerous foods. Due to their high sensitivity and selectivity, nanobiosensors have attracted attention for their use in monitoring not only biological contaminants in food, but also potential chemical and physical hazards. This book offers a broad overview regarding the current progress made in the field of nanosensors, including cutting-edge technological progress and the impact of these devices on the food industry. Special attention is given to the detection of microbial contaminants and harmful metabolotes, such as toxins and hormones, which have a great impact on both humans and animal health and feed. Includes the most up-to-date information on nanoparticles based biosensors and quantum dots for biological detection Provides application methods and techniques for research analysis for bacteriological detection and food testing Presents studies using analytical tools to improve food safety and quality analysis
Download or read book Self Compacting Concrete Materials Properties and Applications written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2019-11-19 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Compacting Concrete: Materials, Properties and Applications presents the latest research on various aspects of self-compacting concrete, including test methods, rheology, strength and durability properties, SCC properties at elevated temperature, SC manufacturing with the use of SCMs, recycled aggregates and industrial by-products. Written by an international group of contributors who are closely associated with the development of self-compacting concrete, the book explores the main differences between SCC and normal concrete in terms of raw materials, fresh properties and hardened properties. Other topics discussed include the structure and practical applications of fiber reinforced SCC. Researchers and experienced engineers will find this reference to be a systematic source to SCC with its accounting of the latest breakthroughs in the field and discussions of SCC constructability, structural integrity, improved flows into complex forms, and superior strength and durability. Offers a systematic and comprehensive source of information on the latest developments in SCC technology Includes mix design procedures, tests standards, rheology, strength and durability properties Explores the properties and practical applications of SCC
Download or read book Test Method for Metallic Fibred Concrete Measuring the Flexural Tensile Strength Limit of Proportionality Lop Residual written by British Standards Institute Staff and published by . This book was released on 2005-07 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precast concrete, Fibre-reinforced concrete, Metals, Reinforcing materials, Concretes, Bend testing, Tensile testing, Cement and concrete technology, Flexural strength, Tensile strength, Tensile stress
Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: -Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications -Includes black TiO2 based cancer theranostics in its coverage -Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.
Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.
Download or read book Polymer Nanocomposites Based on Silver Nanoparticles written by Hiran Mayookh Lal and published by Springer Nature. This book was released on 2021-02-12 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on polymer/silver nanocomposites as the main component in bioengineering systems. It describes in detail the synthesis and characterization (morphological, thermal, mechanical & dynamic mechanical properties), as well as the different applications of these composites. A special chapter is dedicated to the toxicity aspects of silver nanoparticles
Download or read book Ceramic Abstracts written by and published by . This book was released on 1998 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.
Download or read book Nanocomposite Materials written by Jyotishkumar Parameswaranpillai and published by CRC Press. This book was released on 2016-09-19 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive collection of the latest information on nanomaterials and nanocomposites. It covers material synthesis, processing, structure characterization, properties and applications. It presents a coherent treatment of how composite properties depend on nanostructure, and covers cutting-edge topics like bionanocomposites for sustainable development. This book summarizes many developments in the field making it an ideal resource for researchers from industry, academia, government and private research institutions.
