Download or read book Gasoline Compression Ignition Technology written by Gautam Kalghatgi and published by Springer Nature. This book was released on 2022-01-17 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on gasoline compression ignition (GCI) which offers the prospect of engines with high efficiency and low exhaust emissions at a lower cost. A GCI engine is a compression ignition (CI) engine which is run on gasoline-like fuels (even on low-octane gasoline), making it significantly easier to control particulates and NOx but with high efficiency. The state of the art development to make GCI combustion feasible on practical vehicles is highlighted, e.g., on overcoming problems on cold start, high-pressure rise rates at high loads, transients, and HC and CO emissions. This book will be a useful guide to those in academia and industry.

Download or read book Characteristics and Control of Low Temperature Combustion Engines written by Rakesh Kumar Maurya and published by Springer. This book was released on 2017-11-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with novel advanced engine combustion technologies having potential of high fuel conversion efficiency along with ultralow NOx and particulate matter (PM) emissions. It offers insight into advanced combustion modes for efficient utilization of gasoline like fuels. Fundamentals of various advanced low temperature combustion (LTC) systems such as HCCI, PCCI, PPC and RCCI engines and their fuel quality requirements are also discussed. Detailed performance, combustion and emissions characteristics of futuristic engine technologies such as PPC and RCCI employing conventional as well as alternative fuels are analyzed and discussed. Special emphasis is placed on soot particle number emission characterization, high load limiting constraints, and fuel effects on combustion characteristics in LTC engines. For closed loop combustion control of LTC engines, sensors, actuators and control strategies are also discussed. The book should prove useful to a broad audience, including graduate students, researchers, and professionals Offers novel technologies for improved and efficient utilization of gasoline like fuels; Deals with most advanced and futuristic engine combustion modes such as PPC and RCCI; Comprehensible presentation of the performance, combustion and emissions characteristics of low temperature combustion (LTC) engines; Deals with closed loop combustion control of advanced LTC engines; State-of-the-art technology book that concisely summarizes the recent advancements in LTC technology. .

Download or read book Advances in Compression Ignition Natural Gas Diesel Dual Fuel Engines written by Hongsheng Guo and published by Frontiers Media SA. This book was released on 2021-03-23 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biomass Processing for Biofuels Bioenergy and Chemicals written by Wei-Hsin Chen and published by MDPI. This book was released on 2020-05-23 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass can be used to produce renewable electricity, thermal energy, transportation fuels (biofuels), and high-value functional chemicals. As an energy source, biomass can be used either directly via combustion to produce heat or indirectly after it is converted to one of many forms of bioenergy and biofuel via thermochemical or biochemical pathways. The conversion of biomass can be achieved using various advanced methods, which are broadly classified into thermochemical conversion, biochemical conversion, electrochemical conversion, and so on. Advanced development technologies and processes are able to convert biomass into alternative energy sources in solid (e.g., charcoal, biochar, and RDF), liquid (biodiesel, algae biofuel, bioethanol, and pyrolysis and liquefaction bio-oils), and gaseous (e.g., biogas, syngas, and biohydrogen) forms. Because of the merits of biomass energy for environmental sustainability, biofuel and bioenergy technologies play a crucial role in renewable energy development and the replacement of chemicals by highly functional biomass. This book provides a comprehensive overview and in-depth technical research addressing recent progress in biomass conversion processes. It also covers studies on advanced techniques and methods for bioenergy and biofuel production.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Proceedings of International Conference in Mechanical and Energy Technology written by Sanjay Yadav and published by Springer Nature. This book was released on 2020-06-01 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed papers from the International Conference on Mechanical and Energy Technologies, which was held on 7–8 November 2019 at Galgotias College of Engineering and Technology, Greater Noida, India. The book reports on the latest developments in the field of mechanical and energy technology in contributions prepared by experts from academia and industry. The broad range of topics covered includes aerodynamics and fluid mechanics, artificial intelligence, nonmaterial and nonmanufacturing technologies, rapid manufacturing technologies and prototyping, remanufacturing, renewable energies technologies, metrology and computer-aided inspection, etc. Accordingly, the book offers a valuable resource for researchers in various fields, especially mechanical and industrial engineering, and energy technologies.

Download or read book Application of Clean Fuels in Combustion Engines written by Gabriele Di Blasio and published by Springer Nature. This book was released on 2022-01-04 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the impact of fuels characteristics and their effects on the combustion processes in internal combustion engines. It includes the analysis of a variety of biofuels (alcohol fuels and biodiesel) and biogases (natural gas, hydrogen, etc.), providing valuable information related to consequent effects on performance and emissions. The contents focus on recent results and current trends of fuel utilization in the transport sector. State-of-the-art of clean fuels application are also discussed. Thighs book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.

Download or read book Fluid Mechanics and Fluid Power Vol 1 written by Suvanjan Bhattacharyya and published by Springer Nature. This book was released on 2023-05-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the 48th National Conference on Fluid Mechanics and Fluid Power (FMFP 2021) held at BITS Pilani in December 2021. It covers the topics such as fluid mechanics, measurement techniques in fluid flows, computational fluid dynamics, instability, transition and turbulence, fluid‐structure interaction, multiphase flows, micro- and nanoscale transport, bio-fluid mechanics, aerodynamics, turbomachinery, propulsion and power. The book will be useful for researchers and professionals interested in the broad field of mechanics.

Download or read book Advances in Environmental Economic and Social Assessment of Energy Systems written by Diego Iribarren and published by MDPI. This book was released on 2020-12-07 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall energy sector calls for a transformation from a fossil-based system to a low-carbon one. At a technology level, significant efforts have been made to provide energy solutions that contribute to a sustainable energy system. However, the actual suitability of these solutions is often not checked. In this sense, the assessment of energy systems from a life-cycle perspective is of paramount importance when it comes to effectively planning the energy sector. While environmental issues are commonly addressed through the use of the Life Cycle Assessment (LCA) methodology, the comprehensive evaluation of the economic and social aspects of energy systems often remains ignored or underdeveloped. This book consists of a set of scientific works addressing the analysis of energy systems from a (life-cycle) technical, economic, environmental and/or social standpoint. Case studies at and beyond the technology level are included, some of them involving a combination of life cycle and non-life cycle approaches for the thorough evaluation of energy systems under the umbrella of sustainability.

Download or read book Energy Efficiency in Mobility Systems written by Shaharin Anwar Sulaiman and published by Springer Nature. This book was released on 2019-10-03 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a diverse range of initiatives that have been launched to attain sustainable mobility systems, in particular regarding the energy efficiency aspect. It offers a valuable reference for various stakeholders in transportation systems, while also sharing new ideas on how transportation can meet the challenges of tomorrow.

Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1977 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Ethanol Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ethanol Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Ethanol. The editors have built Advances in Ethanol Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Ethanol in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Ethanol Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Current Abstracts written by and published by . This book was released on 1996-11 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Fuels for Sustainable Mobility written by Pravesh Chandra Shukla and published by Springer Nature. This book was released on 2023-05-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the use of renewable fuels for clean transportation and its applications on internal combustion engines. The contents focus on the key aspects of fuel production processes and its impact on various segments of the transportation sector and for sustainable mobility. Several kinds of fuels are assessed such as biofuels, alcohols, and hydrogen, and their effects on the combustion process are characterized by application. This volume will be of use to those working in academia and industry as well as energy experts and policy makers.

Download or read book Catalytic Conversion of Energy Resources into High Value Added Products written by José Luis Pinilla and published by MDPI. This book was released on 2021-09-02 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing active, selective and energy-efficient heterogeneous catalysts is of paramount importance for the production of high value-added products from energy resources in a more sustainable manner. In this Special Issue of Energies, we provide a showcase of the latest progress in the development of cleaner, more efficient processes for the conversion of these feedstocks into valuable fuels, chemicals and energy. Most of the works collected are focused on the conversion of biomass which clearly reflects the paramount importance that the biorefinery concept will play in the years to come.

Download or read book Greener and Scalable E fuels for Decarbonization of Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-10 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights ways of using gaseous and liquid e-fuels like hydrogen (H2), methane (CH4), methanol (CH3OH), DME (CH3-O-CH3), Ammonia (NH3), synthetic petrol and diesel, etc in existing engines and their effects on tailpipe emissions. The contents also cover calibration and optimization procedure for adaptation of these fuels. the volume also discusses the economical aspect of these fuels. Chapters include recent results and are focused on current trends of automotive sector. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.

Download or read book Proceedings of International Conference on Thermofluids written by Shripad Revankar and published by Springer Nature. This book was released on 2020-11-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected and peer-reviewed proceedings of the International Conference on Thermofluids (KIIT Thermo 2020). It focuses on the latest studies and findings in the areas of fluid dynamics, heat transfer, thermodynamics, and combustion. Some of the topics covered in the book include electronic cooling, HVAC system analysis, inverse heat transfer, combustion, nano-fluids, multiphase flow, high-speed flow, and shock waves. The book includes both experimental and numerical studies along with a few review chapters from experienced researchers, and is expected to lead to new research in this important area. This book is of interest to students, researchers as well as practitioners working in the areas of fluid dynamics, thermodynamics, and combustion.