Download or read book A Study of Cumulative Fatigue and Creep fatigue Damage in Type 316 Steel written by M. D. Connaughton and published by . This book was released on 1988 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cumulative Creep Fatigue Damage Evolution in an Austenitic Stainless Steel written by MA. McGaw and published by . This book was released on 1992 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: A model of cumulative creep-fatigue damage has been developed which is based on the use of damage curve equations to describe the evolution of creep-fatigue damage for four basic creep-fatigue cycle types. These cycle types correspond to the four fundamental cycles of the StrainRange Partitioning Life Prediction approach of Manson, Halford, and Hirschberg. A concept referred to as Damage Coupling is introduced to analytically account for the differences in the nature of the damage introduced by each cycle type. For application of this model, the cumulative creep-fatigue damage behavior of Type 316 stainless steel at 816°C has been experimentally established for the two-level loading cases involving fatigue and creep-fatigue, in various permutations. The tests were conducted such that the lower life (high strain) cycling was applied first, for a controlled number of cycles, and the higher life (lower strain) cycling was conducted at the second level, to failure. The proposed model correlated the majority of the observed cumulative creep-fatigue data.

Download or read book Modeling and Identification of Cumulative Creep fatigue Damage in an Austenitic Stainless Steel written by Michael Aaron McGaw and published by . This book was released on 1990 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep Fatigue Damage Assessment in Type 316 Stainless Steel Under Uniaxial and Multiaxial Strain Cycling at 1150 F written by S. Y. Zamrik and published by . This book was released on 1995-06-01 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Interpretation of Axial Creep fatigue Damage Interaction in Type 316 Stainless Steel written by Sam Y. Zamrik and published by . This book was released on 1988 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep Fatigue Interaction and Cumulative Damage Evaluations for Type 304 Stainless Steel Hold Time Fatigue Test Program and Review of Multiaxial Fatigue written by E. P. Esztergar and published by . This book was released on 1972 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fatigue and Durability of Metals at High Temperatures written by S. S. Manson and published by ASM International. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.

Download or read book Fatigue at High Temperature written by R. P. Skelton and published by . This book was released on 1983 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep Fatigue Fracture Analysis of Internal Damage written by Weisheng Zhou and published by Springer Nature. This book was released on with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep fatigue Failure in Type 316 Austenitic Stainless Steel written by and published by . This book was released on 1993 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cumulative Damage Concepts in Thermomechanical Fatigue written by MA. McGaw and published by . This book was released on 1993 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recently developed cumulative creep-fatigue damage model is applied to the prediction of thermomechanical and isothermal cumulative creep-fatigue loading histories. The model utilizes damage curve expressions to describe cumulative damage evolution under creep-fatigue conditions, qualitatively grouped according to dominant damage mechanism or mode. The damage coupling concept of McGaw is employed to describe the cumulative interaction among different mechanisms and modes. In this study, experiments consisting of two-level loadings of thermomechanical fatigue (both in-phase and out-of-phase) followed by isothermal fatigue to failure, were conducted on 316 stainless steel. It was found that the model gave good predictions for the out-of-phase two-level tests and provided reasonable bounds for the in-phase two-level tests.

Download or read book Advances in Fatigue Lifetime Predictive Techniques written by Michael R. Mitchell and published by ASTM International. This book was released on 1992 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty-seven papers from fatigue researchers and practitioners review in detail recent progress in the development of methods to predict fatigue performance of materials and structures and to assess the extent to which these new methods are finding their way into practice. The papers, from the ASTM

Download or read book Thermal and Environmental Effects in Fatigue written by C. E. Jaske and published by . This book was released on 1983 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Type 316 Stainless Steel Behavior Under Fatigue written by R. Gomuc and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A phenomenological approach, already used for other materials, is applied for the prediction of the behavior of 316 stainless steel under fatigue, creep, or combined fatigue-creep loadings. The approach is based on the reduction of either the fatigue limit or the creep strength due to damage accumulation. For multilevel loading, an interaction parameter is introduced to account for the interaction effect between two different loading levels. Some particular aspects concerning the application of the procedure are discussed and the life predictions are compared wit those obtained by other techniques. The essential characteristic of the proposed approach is to provide a reasonably good prediction of life for the material subjected to the prescribed loadings using material constants which are determined through minimal experimental data.

Download or read book An assessment of the linear damage summation method for creep fatigue failure with reference to a cast of Type 316 stainless steel tested at 570 degrees C written by J. Wareing and published by . This book was released on 1984 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.