Download or read book High Temperature Thermal Storage Systems Using Phase Change Materials written by Luisa F. Cabeza and published by Academic Press. This book was released on 2017-11-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Temperature Thermal Storage Systems Using Phase Change Materials offers an overview of several high-temperature phase change material (PCM) thermal storage systems concepts, developed by several well-known global institutions with increasing interest in high temperature PCM applications such as solar cooling, waste heat and concentrated solar power (CSP). The book is uniquely arranged by concepts rather than categories, and includes advanced topics such as thermal storage material packaging, arrangement of flow bed, analysis of flow and heat transfer in the flow bed, energy storage analysis, storage volume sizing and applications in different temperature ranges. By comparing the varying approaches and results of different research centers and offering state-of-the-art concepts, the authors share new and advanced knowledge from researchers all over the world. This reference will be useful for researchers and academia interested in the concepts and applications and different techniques involved in high temperature PCM thermal storage systems. - Offers coverage of several high temperature PCM thermal storage systems concepts developed by several leading research institutions - Provides new and advanced knowledge from researchers all over the world - Includes a base of material properties throughout

Download or read book Thermal Energy Storage Using Phase Change Materials written by Amy S. Fleischer and published by Springer. This book was released on 2015-06-22 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to the use of solid‐liquid phase change materials to store significant amounts of energy in the latent heat of fusion. The proper selection of materials for different applications is covered in detail, as is the use of high conductivity additives to enhance thermal diffusivity. Dr. Fleischer explores how applications of PCMS have expanded over the past 10 years to include the development of high efficiency building materials to reduce heating and cooling needs, smart material design for clothing, portable electronic systems thermal management, solar thermal power plant design and many others. Additional future research directions and challenges are also discussed.

Download or read book Passive Cooling of Buildings written by D. Asimakopoulos and published by Routledge. This book was released on 2013-10-31 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy use in buildings in the EU represents about 40% of the total annual energy consumption. With greater awareness of the need to reduce energy consumption comes a growth of interest in passive cooling, particularly as an alternative to air-conditioning. This book describes the fundamentals of passive cooling together with the principles and formulae necessary for its successful implementation. The material is comprised largely of information and results compiled under the SAVE European Research Programme.

Download or read book Advances in Concentrating Solar Thermal Research and Technology written by Manuel Blanco and published by Woodhead Publishing. This book was released on 2016-11-10 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: After decades of research and development, concentrating solar thermal (CST) power plants (also known as concentrating solar power (CSP) and as Solar Thermal Electricity or STE systems) are now starting to be widely commercialized. Indeed, the IEA predicts that by 2050, with sufficient support over ten percent of global electricity could be produced by concentrating solar thermal power plants. However, CSP plants are just but one of the many possible applications of CST systems. Advances in Concentrating Solar Thermal Research and Technology provides detailed information on the latest advances in CST systems research and technology. It promotes a deep understanding of the challenges the different CST technologies are confronted with, of the research that is taking place worldwide to address those challenges, and of the impact that the innovation that this research is fostering could have on the emergence of new CST components and concepts. It is anticipated that these developments will substantially increase the cost-competiveness of commercial CST solutions and reshape the technological landscape of both CST technologies and the CST industry. After an introductory chapter, the next three parts of the book focus on key CST plant components, from mirrors and receivers to thermal storage. The final two parts of the book address operation and control and innovative CST system concepts. - Contains authoritative reviews of CST research taking place around the world - Discusses the impact this research is fostering on the emergence of new CST components and concepts that will substantially increase the cost-competitiveness of CST power - Covers both major CST plant components and system-wide issues

Download or read book Heat and cold storage with PCM written by Harald Mehling and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The years 2006 and 2007 mark a dramatic change of peoples view regarding c- mate change and energy consumption. The new IPCC report makes clear that - mankind plays a dominant role on climate change due to CO emissions from en- 2 ergy consumption, and that a significant reduction in CO emissions is necessary 2 within decades. At the same time, the supply of fossil energy sources like coal, oil, and natural gas becomes less reliable. In spring 2008, the oil price rose beyond 100 $/barrel for the first time in history. It is commonly accepted today that we have to reduce the use of fossil fuels to cut down the dependency on the supply countries and to reduce CO emissions. The use of renewable energy sources and 2 increased energy efficiency are the main strategies to achieve this goal. In both strategies, heat and cold storage will play an important role. People use energy in different forms, as heat, as mechanical energy, and as light. With the discovery of fire, humankind was the first time able to supply heat and light when needed. About 2000 years ago, the Romans started to use ceramic tiles to store heat in under floor heating systems. Even when the fire was out, the room stayed warm. Since ancient times, people also know how to cool food with ice as cold storage.

Download or read book Solar Thermal Energy Storage System using phase change material for uninterrupted on farm agricultural processing and value addition written by Anjum Munir and published by kassel university press GmbH. This book was released on 2019-10-09 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy storage technologies are gaining attention nowadays for uninterrupted supply of solar power in off-sunshine hours. An indigenized solar phase change material (PCM) system was developed and performance evaluated in the current study to efficiently store solar thermal power using a latent heat storage approach, which can be utilized in any subsequent decentralized food processing application. A 2.5 m2 laying Scheffler reflector is used to precisely focus the incoming direct normal irradiance (DNI) on a casted aluminum heat receiver (220 mm diameter) from where this concentrated heat energy is absorbed and conducted to the PCM unit by the flow of thermal oil (Fragoltherm-32 thermo-oil). During the circulation around PCM pipes inside the PCM unit, thermal oil discharges heat energy to the PCM, which undergoes change of phase from solid to liquid. Computational fluid dynamics (CFD) analysis of the PCM unit were also performed according to the actual boundary conditions, which gave satisfactory results in terms of temperature and velocity distribution. With an average DNI of 781 W/m2, the highest temperature of the receiver surface during the trials was observed at about 155 C that produces thermal oil at 110°C inside the receiver and around 48°C of PCM in the PCM unit. The heat energy losses per unit time (W) due to the lack of reflectivity from the Scheffler reflector, out-of-focus radiations at the targeted area, absorptivity of heat receiver, piping system losses, and cylinder losses (in the form of conduction, convection, and radiations using 50 mm insulation thickness) were found to be 110 W (10 %), 99 W (9 %), 89 W (8 %), 128 W (12 %), 161 W (15 %), and 89 W (8 %), respectively. These findings of CFD analysis and mathematical modeling were also consistent with real-time data, which was logged through an online Control and Monitoring Interface portal. The final energy available to the PCM was 414W with an overall system efficiency of 38 %, which can be improved by decreasing thermal losses of the system and using other PCM materials.

Download or read book Thermal Energy Storage with Phase Change Materials written by Mohammed Farid and published by CRC Press. This book was released on 2021-07-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on latent heat storage, which is one of the most efficient ways of storing thermal energy. Unlike the sensible heat storage method, the latent heat storage method provides much higher storage density with a smaller difference between storing and releasing temperatures. Thermal Energy Storage with Phase Change Materials is structured into four chapters that cover many aspects of thermal energy storage and their practical applications. Chapter 1 reviews selection, performance, and applications of phase change materials. Chapter 2 investigates mathematical analyses of phase change processes. Chapters 3 and 4 present passive and active applications for energy saving, peak load shifting, and price-based control heating using phase change materials. These chapters explore the hot topic of energy saving in an overarching way, and so they are relevant to all courses. This book is an ideal research reference for students at the postgraduate level. It also serves as a useful reference for electrical, mechanical, and chemical engineers and students throughout their work. FEATURES Explains the technical principles of thermal energy storage, including materials and applications in different classifications Provides fundamental calculations of heat transfer with phase change Discusses the benefits and limitations of different types of phase change materials (PCM) in both micro- and macroencapsulations Reviews the mechanisms and applications of available thermal energy storage systems Introduces innovative solutions in hot and cold storage applications

Download or read book Thermal Energy Storage with Phase Change Materials written by João M.P.Q. Delgado and published by Springer. This book was released on 2018-08-09 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short book provides an update on various methods for incorporating phase changing materials (PCMs) into building structures. It discusses previous research into optimizing the integration of PCMs into surrounding walls (gypsum board and interior plaster products), trombe walls, ceramic floor tiles, concrete elements (walls and pavements), windows, concrete and brick masonry, underfloor heating, ceilings, thermal insulation and furniture an indoor appliances. Based on the phase change state, PCMs fall into three groups: solid–solid PCMs, solid–liquid PCMs and liquid–gas PCMs. Of these the solid–liquid PCMs, which include organic PCMs, inorganic PCMs and eutectics, are suitable for thermal energy storage. The process of selecting an appropriate PCM is extremely complex, but crucial for thermal energy storage. The potential PCM should have a suitable melting temperature, and the desirable heat of fusion and thermal conductivity specified by the practical application. Thus, the methods of measuring the thermal properties of PCMs are key. With suitable PCMs and the correct incorporation method, latent heat thermal energy storage (LHTES) can be economically efficient for heating and cooling buildings. However, several problems need to be tackled before LHTES can reliably and practically be applied.

Download or read book Ultra High Temperature Thermal Energy Storage Transfer and Conversion written by Alejandro Datas and published by Woodhead Publishing. This book was released on 2020-09-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-High Temperature Thermal Energy Storage, Transfer and Conversion presents a comprehensive analysis of thermal energy storage systems operating at beyond 800°C. Editor Dr. Alejandro Datas and his team of expert contributors from a variety of regions summarize the main technological options and the most relevant materials and characterization considerations to enable the reader to make the most effective and efficient decisions.This book helps the reader to solve the very specific challenges associated with working within an ultra-high temperature energy storage setting. It condenses and summarizes the latest knowledge, covering fundamentals, device design, materials selection and applications, as well as thermodynamic cycles and solid-state devices for ultra-high temperature energy conversion.This book provides a comprehensive and multidisciplinary guide to engineers and researchers in a variety of fields including energy conversion, storage, cogeneration, thermodynamics, numerical methods, CSP, and materials engineering. It firstly provides a review of fundamental concepts before exploring numerical methods for fluid-dynamics and phase change materials, before presenting more complex elements such as heat transfer fluids, thermal insulation, thermodynamic cycles, and a variety of energy conversation methods including thermophotovoltaic, thermionic, and combined heat and power. - Reviews the main technologies enabling ultra-high temperature energy storage and conversion, including both thermodynamic cycles and solid-state devices - Includes the applications for ultra-high temperature energy storage systems, both in terrestrial and space environments - Analyzes the thermophysical properties and relevant experimental and theoretical methods for the analysis of high-temperature materials

Download or read book Phase Change Materials for Heat Transfer written by Hafiz Muhammad Ali and published by Elsevier. This book was released on 2023-03-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Change Materials for Heat Transfer focuses on how to maximize the heat transfer rate and thermal storage capability of PCMs. Various aspects are covered, including preparation of phase change materials to heat transfer enhancement and characteristics with an emphasis on prominent applications. The book is designed in such a manner to cover the broad definitions, introduction, brief history, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors and the applications and challenges of PCMs. This handbook will prove invaluable to readers interested in a resource with the latest information in this emerging field. - Provides key heat transfer enhancement and thermophysical properties features for a wide range of phase change materials - Presents detailed parameter selection procedures impacting heat transfer - Reviews available prediction methods for heat transfer and thermophysical properties of phase change material - Includes practical applications of phase change materials for enhanced thermal control - Explores practical challenges and opportunities of phase change materials potential in heat transfer enhancement

Download or read book Solar Energy Utilization written by Hafit Yüncü and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until very recently, energy supply of the world has been treated as being nearly inexhaustible. Nowadays about 90 percent of the energy used is obtained from non-renewable resources: oil, natural gas, coal and uranium. These resources are being used up at an alarming rate. To meet our demands we are now searching for new sources of energy. One of these new sources of energy is solar energy which will assume increasing importance. It is free but means must be developed to use it economically. Research is actively under way to reduce the storage cost of this low intensity energy and for the design of economical systems. The purpose of this Institute is to provide an international forum for the dissemination of information on solar energy utilization: fundamentals and applications in industry. This meeting is primarily a high level teaching activity. The subject is treated in considerable depth by lecturers eminent in their field. The other participants include scientists, engineers, and senior graduate students who themselves are involved in a similar research and who wish to learn more about current developments, as well as scientists from other areas who are planning to research on solar energy. The lectures are supplemented by informal discussions designed to encourage the free and critical exchange of ideas. A limited number of contributions are also included. This volume contains both basic and applied information contributed during the Institute. The editors appreciate the cooperation of Martinus Nijhoff Publishezsin making the proceedings widely available.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1984 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Thermal Energy Storage Systems written by Luisa F. Cabeza and published by Woodhead Publishing. This book was released on 2020-10-28 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Thermal Energy Storage Systems, 2nd edition, presents a fully updated comprehensive analysis of thermal energy storage systems (TES) including all major advances and developments since the first edition published. This very successful publication provides readers with all the information related to TES in one resource, along with a variety of applications across the energy/power and construction sectors, as well as, new to this edition, the transport industry. After an introduction to TES systems, editor Dr. Prof. Luisa Cabeza and her team of expert authors consider the source, design and operation of the use of water, molten salts, concrete, aquifers, boreholes and a variety of phase-change materials for TES systems, before analyzing and simulating underground TES systems. This edition benefits from 5 new chapters covering the most advanced technologies including sorption systems, thermodynamic and dynamic modelling as well as applications to the transport industry and the environmental and economic aspects of TES. It will benefit researchers and academics of energy systems and thermal energy storage, construction engineering academics, engineers and practitioners in the energy and power industry, as well as architects of plants and storage systems and R&D managers. - Includes 5 brand new chapters covering Sorption systems, Thermodynamic and dynamic models, applications to the transport sector, environmental aspects of TES and economic aspects of TES - All existing chapters are updated and revised to reflect the most recent advances in the research and technologies of the field - Reviews heat storage technologies, including the use of water, molten salts, concrete and boreholes in one comprehensive resource - Describes latent heat storage systems and thermochemical heat storage - Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry

Download or read book Efficient and Suitable Construction written by João M.P.Q. Delgado and published by Springer Nature. This book was released on 2020-12-12 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research in the area of hygrothermal building performance, acoustic and natural lighting performance in buildings, phase change materials (PCM) and energy storage. Discussing the state of the art in the field, and covering topics relevant to variety of engineering disciplines, such as civil, materials and mechanical engineering, it will appeal to scientists, students, practitioners, lecturers and other stakeholders.

Download or read book PCM Based Building Envelope Systems written by Benjamin Duraković and published by Springer Nature. This book was released on 2020-01-23 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: PCM Enhanced Building Envelopes presents the latest research in the field of thermal energy storage technologies that can be applied to solar heating and cooling with the aim of shifting and reducing building energy demand. It discusses both practical and technical issues, as well as the advantages of using common phase change materials (PCMs) in buildings as a more efficient, novel solution for passive solar heating/cooling strategies. The book includes qualitative and quantitative descriptions of the science, technology and practices of PCM-based building envelopes, and reflects recent trends by placing emphasis on energy storage solutions within building walls, floors, ceilings, façades, windows, and shading devices. With the aim of assessing buildings’ energy performance, the book provides advanced modeling and simulation tools as a theoretical basis for the analysis of PCM-based building envelopes in terms of heat storage and transfer. This book will be of interest to all those dealing with building energy analysis such as researchers, academics, students and professionals in the fields of mechanical and civil engineering and architectural design

Download or read book Advances in Mechanical Engineering and Technology written by Ranganath M. Singari and published by Springer Nature. This book was released on 2022-03-22 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Advanced Production and Industrial Engineering (ICAPIE) - 2021 held at Delhi Technological University, Delhi, during June 18–19, 2021. The book covers the recent advances and challenges in the area of production and industrial engineering. Various topics covered include artificial intelligence and expert systems, CAD/CAM Integration Technology, CAD/CAM, automation and robotics, computer-aided geometric design and simulation, construction machinery and equipment, design tools, cutting tool material and coatings, dynamic mechanical analysis, optimization and control, energy machinery and equipment, flexible manufacturing technology and system, fluid dynamics, bio-fuels, fuel cells, high-speed/precision machining, laser processing technology, logistics and supply chain management, machinability of materials, composite materials, material engineering, mechanical dynamics and its applications, mechanical power engineering, mechanical transmission theory and applications, non-traditional machining processes, operations management, precision manufacturing and measurement, precision manufacturing and measurement, reverse engineering and structural strength and robustness. This book is useful for various researcher mainly mechanical and allied engineering discipline.

Download or read book Solar Energy Update written by and published by . This book was released on 1982 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: