Download or read book A Simulation Study of Carbon Sequestration in Deep Saline Aquifers written by Ajitabh Kumar and published by . This book was released on 2004 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding the Plume Dynamics and Risk Associated with CO2 Injection in Deep Saline Aquifers written by Abhishek Kumar Gupta and published by . This book was released on 2011 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological sequestration of CO2 in deep saline reservoirs is one of the ways to reduce its continuous emission into the atmosphere to mitigate the greenhouse effect. The effectiveness of any CO2 sequestration operation depends on pore volume and the sequestration efficiency of the reservoir. Sequestration efficiency is defined here as the maximum storage with minimum risk of leakage to the overlying formations or to the surface. This can be characterized using three risk parameters i) the time the plume takes to reach the top seal; ii) maximum lateral extent of the plume and iii) the percentage of mobile CO2 present at any time. The selection among prospective saline reservoirs can be expedited by developing some semi-analytical correlations for these risk parameters which can be used in place of reservoir simulation study for each and every saline reservoir. Such correlations can reduce the cost and time for commissioning a geological site for CO2 sequestration. To develop such correlations, a database has been created from a large number of compositional reservoir simulations for different elementary reservoir parameters including porosity, permeability, permeability anisotropy, reservoir depth, thickness, dip, perforation interval and constant pressure far boundary condition. This database is used to formulate different correlations that relate the sequestration efficiency to reservoir properties and operating conditions. The various elementary reservoir parameters are grouped together to generate different variants of gravity number used in the correlations. We update a previously reported correlation for time to hit the top seal and develop new correlations for other two parameters using the newly created database. A correlation for percentage of trapped CO2 is also developed using a previously created similar database. We find that normalizing all risk parameters with their respective characteristic values yields reasonable correlations with different variants of gravity number. All correlations confirm the physics behind plume movement in a reservoir. The correlations reproduce almost all simulation results within a factor of two, and this is adequate for rapid ranking or screening of prospective storage reservoirs. CO2 injection in saline reservoirs on the scale of tens of millions of tonnes may result in fracturing, fault activation and leakage of brine along conductive pathways. Critical contour of overpressure (CoP) is a convenient proxy to determine the risk associated with pressure buildup at different location and time in the reservoir. The location of this contour varies depending on the target aquifer properties (porosity, permeability etc.) and the geology (presence and conductivity of faults). The CoP location also depends on relative permeability, and we extend the three-region injection model to derive analytical expressions for a specific CoP as a function of time. We consider two boundary conditions at the aquifer drainage radius, constant pressure or an infinite aquifer. The model provides a quick tool for estimating pressure profiles. Such tools are valuable for screening and ranking sequestration targets. Relative permeability curves measured on samples from seven potential storage formations are used to illustrate the effect on the CoPs. In the case of a constant pressure boundary and constant rate injection scenario, the CoP for small overpressures is time-invariant and independent of relative permeability. Depending on the relative values of overall mobilities of two-phase region and of brine region, the risk due to a critical CoP which lies in the two-phase region can either increase or decrease with time. In contrast, the risk due to a CoP in the drying region always decreases with time. The assumption of constant pressure boundaries is optimistic in the sense that CoPs extend the least distance from the injection well. We extend the analytical model to infinite-acting aquifers to get a more widely applicable estimate of risk. An analytical expression for pressure profile is developed by adapting water influx models from traditional reservoir engineering to the "three-region" saturation distribution. For infinite-acting boundary condition, the CoP trends depend on same factors as in the constant pressure case, and also depend upon the rate of change of aquifer boundary pressure with time. Commercial reservoir simulators are used to verify the analytical model for the constant pressure boundary condition. The CoP trends from the analytical solution and simulation results show a good match. To achieve safe and secure CO2 storage in underground reservoirs several state and national government agencies are working to develop regulatory frameworks to estimate various risks associated with CO2 injection in saline aquifers. Certification Framework (CF), developed by Oldenburg et al (2007) is a similar kind of regulatory approach to certify the safety and effectiveness of geologic carbon sequestration sites. CF is a simple risk assessment approach for evaluating CO2 and brine leakage risk associated only with subsurface processes and excludes compression, transportation, and injection-well leakage risk. Certification framework is applied to several reservoirs in different geologic settings. These include In Salah CO2 storage project Krechba, Algeria, Aquistore CO2 storage project Saskatchewan, Canada and WESTCARB CO2 storage project, Solano County, California. Compositional reservoir simulations in CMG-GEM are performed for CO2 injection in each storage reservoir to predict pressure build up risk and CO2 leakage risk. CO2 leakage risk is also estimated using the catalog of pre-computed reservoir simulation results. Post combustion CO2 capture is required to restrict the continuous increase of carbon content in the atmosphere. Coal fired electricity generating stations are the dominant players contributing to the continuous emissions of CO2 into the atmosphere. U.S. government has planned to install post combustion CO2 capture facility in many coal fired power plants including W.A. Parish electricity generating station in south Texas. Installing a CO2 capture facility in a coal fired power plant increases the capital cost of installation and operating cost to regenerate the turbine solvent (steam or natural gas) to maintain the stripper power requirement. If a coal-fired power plant with CO2 capture is situated over a viable source for geothermal heat, it may be desirable to use this heat source in the stripper. Geothermal brine can be used to replace steam or natural gas which in turn reduces the operating cost of the CO2 capture facility. High temperature brine can be produced from the underground geothermal brine reservoir and can be injected back to the reservoir after the heat from the hot brine is extracted. This will maintain the reservoir pressure and provide a long-term supply of hot brine to the stripper. Simulations were performed to supply CO2 capture facility equivalent to 60 MWe electric unit to capture 90% of the incoming CO2 in WA Parish electricity generating station. A reservoir simulation study in CMG-GEM is performed to evaluate the feasibility to recycle the required geothermal brine for 30 years time. This pilot study is scaled up to 15 times of the original capacity to generate 900 MWe stripping system to capture CO2 at surface.

Download or read book Science of Carbon Storage in Deep Saline Formations written by Pania Newell and published by Elsevier. This book was released on 2018-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science of Carbon Storage in Deep Saline Formations: Process Coupling across Time and Spatial Scales summarizes state-of-the-art research, emphasizing how the coupling of physical and chemical processes as subsurface systems re-equilibrate during and after the injection of CO2. In addition, it addresses, in an easy-to-follow way, the lack of knowledge in understanding the coupled processes related to fluid flow, geomechanics and geochemistry over time and spatial scales. The book uniquely highlights process coupling and process interplay across time and spatial scales that are relevant to geological carbon storage.

Download or read book Geological Carbon Storage written by Stéphanie Vialle and published by John Wiley & Sons. This book was released on 2018-11-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological Carbon Storage Subsurface Seals and Caprock Integrity Seals and caprocks are an essential component of subsurface hydrogeological systems, guiding the movement and entrapment of hydrocarbon and other fluids. Geological Carbon Storage: Subsurface Seals and Caprock Integrity offers a survey of the wealth of recent scientific work on caprock integrity with a focus on the geological controls of permanent and safe carbon dioxide storage, and the commercial deployment of geological carbon storage. Volume highlights include: Low-permeability rock characterization from the pore scale to the core scale Flow and transport properties of low-permeability rocks Fundamentals of fracture generation, self-healing, and permeability Coupled geochemical, transport and geomechanical processes in caprock Analysis of caprock behavior from natural analogues Geochemical and geophysical monitoring techniques of caprock failure and integrity Potential environmental impacts of carbon dioxide migration on groundwater resources Carbon dioxide leakage mitigation and remediation techniques Geological Carbon Storage: Subsurface Seals and Caprock Integrity is an invaluable resource for geoscientists from academic and research institutions with interests in energy and environment-related problems, as well as professionals in the field.

Download or read book Science of Carbon Storage in Deep Saline Formations written by Pania Newell and published by Elsevier. This book was released on 2018-09-06 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science of Carbon Storage in Deep Saline Formations: Process Coupling across Time and Spatial Scales summarizes state-of-the-art research, emphasizing how the coupling of physical and chemical processes as subsurface systems re-equilibrate during and after the injection of CO2. In addition, it addresses, in an easy-to-follow way, the lack of knowledge in understanding the coupled processes related to fluid flow, geomechanics and geochemistry over time and spatial scales. The book uniquely highlights process coupling and process interplay across time and spatial scales that are relevant to geological carbon storage. - Includes the underlying scientific research, as well as the risks associated with geological carbon storage - Covers the topic of geological carbon storage from various disciplines, addressing the multi-scale and multi-physics aspects of geological carbon storage - Organized by discipline for ease of navigation

Download or read book Multiphase Flow in Permeable Media written by Martin J. Blunt and published by Cambridge University Press. This book was released on 2017-02-16 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental description of multiphase fluid flow through porous rock, based on understanding movement at the pore, or microscopic, scale.

Download or read book Geologic Carbon Sequestration written by V. Vishal and published by Springer. This book was released on 2016-05-11 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exclusive compilation written by eminent experts from more than ten countries, outlines the processes and methods for geologic sequestration in different sinks. It discusses and highlights the details of individual storage types, including recent advances in the science and technology of carbon storage. The topic is of immense interest to geoscientists, reservoir engineers, environmentalists and researchers from the scientific and industrial communities working on the methodologies for carbon dioxide storage. Increasing concentrations of anthropogenic carbon dioxide in the atmosphere are often held responsible for the rising temperature of the globe. Geologic sequestration prevents atmospheric release of the waste greenhouse gases by storing them underground for geologically significant periods of time. The book addresses the need for an understanding of carbon reservoir characteristics and behavior. Other book volumes on carbon capture, utilization and storage (CCUS) attempt to cover the entire process of CCUS, but the topic of geologic sequestration is not discussed in detail. This book focuses on the recent trends and up-to-date information on different storage rock types, ranging from deep saline aquifers to coal to basaltic formations.

Download or read book Uncertainty Analysis of Carbon Sequestration in an Inclined Deep Saline Aquifer written by Guang Yang and published by . This book was released on 2012 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologic Carbon Sequestration (GCS) is a proposed means to reduce atmospheric carbon dioxide (CO2 ). In Wyoming, GCS is proposed for the Nugget Sandstone, an eolian sandstone exhibiting permeability heterogeneity. Using subsets of static site characterization data, this study builds a suite of increasingly complex geologic model families for the Nugget Sandstone in the Wyoming Overthrust Belt, which is an inclined deep saline aquifer. These models include: a homogeneous model (FAM1), a stationary geostatistical facies model with constant petrophyscial properties in each facies (FAM2a), a stationary geostatistical petrophysical model (FAM2b), a stationary facies model with sub-facies petrophysical variability (FAM3), and a non-stationary facies model (with sub-facies variability) conditioned to soft data (FAM4). These families, representing increasingly sophisticated conceptual models built with increasing amounts of site data, were simulated with the same CO2 injection test (50-year duration at ~1/3 Mt per year), followed by a 2000-year monitoring phase. Based on the Design of Experiment (DOE), an efficient sensitivity analysis (SA) is conducted for all model families, systematically varying uncertain input parameters, while assuming identical production scenario (i.e., well configuration, rate, BHP constraint) and boundary condition (i.e., model is part of a larger semi-infinite system where the injected gas can flow out). Results are compared among the families at different time scales to identify parameters that have first order impact on select simulation outcomes. For predicting CO2 storage ratio (SR) and brine leakage, at both time scales (i.e., end of injection and end of monitoring), more geologic factors are revealed to be important as model complexity is increased, while the importance of engineering factors is simultaneously diminished. In predicting each of the trapped and dissolved gases, when model is of greater complexity, more geologic factors are identified as important with increasing time. This effect, however, cannot be revealed by simpler models. Based on results of the SA, a response surface (RS) analysis is conducted next to generate prediction envelopes of the outcomes which are further compared among the model families. Results suggest a large uncertainty range in the SR given the uncertainties of the parameter and modeling choices. At the end of injection, SR ranges from 0.18 to 0.38; at the end of monitoring, SR ranges from 0.71 to 0.98. In predicting the SR, during the entire simulation time, uncertainty ranges of FAM2b, FAM3, and FAM4 are larger than those of FAM1 and FAM2a, since the former models incorporate more geological complexities. The uncertainty range also changes with time and with the model families. By the end of injection, prediction envelops of all families are more or less similar. Over this shorter time scale, where heterogeneities near the injection site are not significantly different among the different model representations, simpler models can capture the uncertainty in the predicted SR. During the monitoring phase, prediction envelope of each family deviates gradually from one another, reflecting the different (evolving) large scale heterogeneity experienced by each family as plume migrates and grows continuously. Compared to FAM4 (i.e., the most sophisticated model), all other families estimate higher mean SRs. The lesser the amount of site data are incorporated (i.e., lesser geological complexities), the greater the estimated mean SR. In terms of magnitude and range of the uncertainty, prediction envelop of FAM3 is the closest to that of FAM4, while FAM2b's uncertainty range is the largest and FAM1 and FAM2a's ranges are small. Finally, end-member gas plume footprint for each family is established from results of the RS designs (i.e., corresponding to SR minimum, median, and maximum). For FAM1 and FAM2a, at each time scale inspected, the end-member gas plume footprints are not as drastically different as in FAM2b, 3, and 4, since their SR uncertainty range is comparatively small. However, for families of greater geological complexity (i.e., FAM2b, FAM3, and FAM4), the differences are much more significant: gas plume of minimum SR sits around the wellbore and doesn't migrate far, while gas plume of maximum SR migrates a great distance from the wellbore. To summarize, geologic factors and associated conceptual model uncertainty can dominate the uncertainty in predicting SR, brine leakage, and plume footprint. At the study site, better characterization of geologic data such as porosity-permeability transform and facies correlation structure, can lead to significantly reduced uncertainty in predictions. Given the current uncertainty in parameters and modeling choices, CO2 plume predicted by the majority of the simulation runs is either trapped near the injection site (e.g., due to low formation permeability and its heterogeneity) or is gravity-stable under conditions of higher permeability and lower temperature gradient, suggesting a low leakage risk. The inclined Nugget Sandstone at the study site appears to be a viable candidate for safe GCS in this region.

Download or read book Petrophysical Modeling and Simulation Study of Geological CO2 Sequestration written by Xianhui Kong and published by . This book was released on 2014 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global warming and greenhouse gas (GHG) emissions have recently become the significant focus of engineering research. The geological sequestration of greenhouse gases such as carbon dioxide (CO2) is one approach that has been proposed to reduce the greenhouse gas emissions and slow down global warming. Geological sequestration involves the injection of produced CO2 into subsurface formations and trapping the gas through many geological mechanisms, such as structural trapping, capillary trapping, dissolution, and mineralization. While some progress in our understanding of fluid flow in porous media has been made, many petrophysical phenomena, such as multi-phase flow, capillarity, geochemical reactions, geomechanical effect, etc., that occur during geological CO2 sequestration remain inadequately studied and pose a challenge for continued study. It is critical to continue to research on these important issues. Numerical simulators are essential tools to develop a better understanding of the geologic characteristics of brine reservoirs and to build support for future CO2 storage projects. Modeling CO2 injection requires the implementation of multiphase flow model and an Equation of State (EOS) module to compute the dissolution of CO2 in brine and vice versa. In this study, we used the Integrated Parallel Accurate Reservoir Simulator (IPARS) developed at the Center for Subsurface Modeling at The University of Texas at Austin to model the injection process and storage of CO2 in saline aquifers. We developed and implemented new petrophysical models in IPARS, and applied these models to study the process of CO2 sequestration. The research presented in this dissertation is divided into three parts. The first part of the dissertation discusses petrophysical and computational models for the mechanical, geological, petrophysical phenomena occurring during CO2 injection and sequestration. The effectiveness of CO2 storage in saline aquifers is governed by the interplay of capillary, viscous, and buoyancy forces. Recent experimental data reveals the impact of pressure, temperature, and salinity on interfacial tension (IFT) between CO2 and brine. The dependence of CO2-brine relative permeability and capillary pressure on IFT is also clearly evident in published experimental results. Improved understanding of the mechanisms that control the migration and trapping of CO2 in the subsurface is crucial to design future storage projects for long-term, safe containment. We have developed numerical models for CO2 trapping and migration in aquifers, including a compositional flow model, a relative permeability model, a capillary model, an interfacial tension model, and others. The heterogeneities in porosity and permeability are also coupled to the petrophysical models. We have developed and implemented a general relative permeability model that combines the effects of pressure gradient, buoyancy, and capillary pressure in a compositional and parallel simulator. The significance of IFT variations on CO2 migration and trapping is assessed. The variation of residual saturation is modeled based on interfacial tension and trapping number, and a hysteretic trapping model is also presented. The second part of this dissertation is a model validation and sensitivity study using coreflood simulation data derived from laboratory study. The motivation of this study is to gain confidence in the results of the numerical simulator by validating the models and the numerical accuracies using laboratory and field pilot scale results. Published steady state, core-scale CO2/brine displacement results were selected as a reference basis for our numerical study. High-resolution compositional simulations of brine displacement with supercritical CO2 are presented using IPARS. A three-dimensional (3D) numerical model of the Berea sandstone core was constructed using heterogeneous permeability and porosity distributions based on geostatistical data. The measured capillary pressure curve was scaled using the Leverett J-function to include local heterogeneity in the sub-core scale. Simulation results indicate that accurate representation of capillary pressure at sub-core scales is critical. Water drying and the shift in relative permeability had a significant impact on the final CO2 distribution along the core. This study provided insights into the role of heterogeneity in the final CO2 distribution, where a slight variation in porosity gives rise to a large variation in the CO2 saturation distribution. The third part of this study is a simulation study using IPARS for Cranfield pilot CO2 sequestration field test, conducted by the Bureau of Economic Geology (BEG) at The University of Texas at Austin. In this CO2 sequestration project, a total of approximately 2.5 million tons supercritical CO2 was injected into a deep saline aquifer about ~10000 ft deep over 2 years, beginning December 1st 2009. In this chapter, we use the simulation capabilities of IPARS to numerically model the CO2 injection process in Cranfield. We conducted a corresponding history-matching study and got good agreement with field observation. Extensive sensitivity studies were also conducted for CO2 trapping, fluid phase behavior, relative permeability, wettability, gravity and buoyancy, and capillary effects on sequestration. Simulation results are consistent with the observed CO2 breakthrough time at the first observation well. Numerical results are also consistent with bottomhole injection flowing pressure for the first 350 days before the rate increase. The abnormal pressure response with rate increase on day 350 indicates possible geomechanical issues, which can be represented in simulation using an induced fracture near the injection well. The recorded injection well bottomhole pressure data were successfully matched after modeling the fracture in the simulation model. Results also illustrate the importance of using accurate trapping models to predict CO2 immobilization behavior. The impact of CO2/brine relative permeability curves and trapping model on bottom-hole injection pressure is also demonstrated.

Download or read book Simulation of CO2 Sequestration in Deep Saline Aquifers Gordon Creek Field Utah written by German Chaves and published by . This book was released on 2011 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.

Download or read book Influence of Relative Permeability Curves on Extent of CO2 Plume During Injection Into Deep Saline Aquifers written by Sang-yeop Park and published by . This book was released on 2007 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation and Optimization of CO2 Sequestration in Saline Aquifers written by Zheming Zhang and published by . This book was released on 2013 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: With heightened concerns on CO2 emissions from pulverized-coal power plants, there has been major emphasis in recent years on the development of safe and economical Geological Carbon Sequestration (GCS) technology. Although among one of the most promising technologies to address the problem of anthropogenic global-warming due to CO2 emissions, the detailed mechanisms of GCS are not well-understood. As a result, there remain many uncertainties in determining the sequestration capacity of the formation/reservoir and the safety of sequestered CO2 due to leakage. These uncertainties arise due to lack of information about the detailed interior geometry of the formation and the heterogeneity in its geological properties such as permeability and porosity which influence the sequestration capacity and plume migration. Furthermore, the sequestration efficiency is highly dependent on the injection strategy which includes injection rate, injection pressure, type of injection well employed and its orientation etc. The goal of GCS is to maximize the sequestration capacity and minimize the plume migration by optimizing the GCS operation before proceeding with its large scale deployment. In this dissertation, numerical simulations of GCS are conducted using the DOE multi-phase flow solver TOUGH2 (Transport of Unsaturated Groundwater and Heat). A multi-objective optimization code based on genetic algorithm is developed to optimize the GCS operation for a given geological formation. Most of the studies are conducted for sequestration in a saline formation (aquifer). First, large scale GCS studies are conducted for three identified saline formations for which some experimental data and computations performed by other investigators are available, namely the Mt. Simon formation in Illinois basin, Frio formation in southwest Texas, and the Utsira formation off the coast of Norway. These simulation studies have provided important insights as to the key sources of uncertainties that can influence the accuracy in simulations. For optimization of GCS practice, a genetic algorithm (GA) based optimizer has been developed and combined with TOUGH2. Designated as GA-TOUGH2, this combined solver/optimizer has been validated by performing optimization studies on a number of model problems and comparing the results with brute force optimization which requires large number of simulations. Using GA-TOUGH2, an innovative reservoir engineering technique known as water-alternating-gas (WAG) injection is investigated in the context of GCS; GA-TOUGH2 is applied to determine the optimal WAG operation for enhanced CO2 sequestration capacity. GA-TOUGH2 is also used to perform optimization designs of time-dependent injection rate for optimal injection pressure management, and optimization designs of well distribution for minimum well interference. Results obtained from these optimization designs suggest that over 20% reduction of in situ CO2 footprint, greatly enhanced CO2 dissolution, and significantly improved well injectivity can be achieved by employing GA-TOUGH2. GA-TOUGH2 has also been employed to determine the optimal well placement in a multi-well injection operation. GA-TOUGH2 appears to hold great promise in studying a host of other optimization problems related to GCS.

Download or read book Geological Storage of Carbon Dioxide CO2 written by J Gluyas and published by Elsevier. This book was released on 2013-11-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological storage and sequestration of carbon dioxide, in saline aquifers, depleted oil and gas fields or unminable coal seams, represents one of the most important processes for reducing humankind's emissions of greenhouse gases. Geological storage of carbon dioxide (CO2) reviews the techniques and wider implications of carbon dioxide capture and storage (CCS).Part one provides an overview of the fundamentals of the geological storage of CO2. Chapters discuss anthropogenic climate change and the role of CCS, the modelling of storage capacity, injectivity, migration and trapping of CO2, the monitoring of geological storage of CO2, and the role of pressure in CCS. Chapters in part two move on to explore the environmental, social and regulatory aspects of CCS including CO2 leakage from geological storage facilities, risk assessment of CO2 storage complexes and public engagement in projects, and the legal framework for CCS. Finally, part three focuses on a variety of different projects and includes case studies of offshore CO2 storage at Sleipner natural gas field beneath the North Sea, the CO2CRC Otway Project in Australia, on-shore CO2 storage at the Ketzin pilot site in Germany, and the K12-B CO2 injection project in the Netherlands.Geological storage of carbon dioxide (CO2) is a comprehensive resource for geoscientists and geotechnical engineers and academics and researches interested in the field. - Reviews the techniques and wider implications of carbon dioxide capture and storage (CCS) - An overview of the fundamentals of the geological storage of CO2 discussing the modelling of storage capacity, injectivity, migration and trapping of CO2 among other subjects - Explores the environmental, social and regulatory aspects of CCS including CO2 leakage from geological storage facilities, risk assessment of CO2 storage complexes and the legal framework for CCS

Download or read book Carbon Dioxide Sequestration Into Deep Saline Aquifers written by Emre Özgür and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analytical and numerical modeling of CO2 sequestration in deep saline aquifers having different properties was studied with diffusion and convection mechanisms. The complete dissolution of CO2 in the aquifer by diffusion took thousands, even millions of years. In diffusion dominated system, an aquifer with 100 m thickness saturated with CO2 after 10,000,000 years. It was much earlier in convective dominant system. In diffusion process, the dissolution of CO2 in aquifer increased with porosity increase; however, in convection dominant process dissolution of CO2 in aquifer decreased with porosity increase. The increase in permeability accelerated the dissolution of CO2 in aquifer significantly, which was due to increasing velocity. The results of convective dominant mechanism in aquifers with 1md and 10 md permeability values were so close to that of diffusion dominated system. For the aquifer having permeability higher than 10 md, the convection mechanism began to dominate gradually and it became fully convection dominated system for 50 md and higher permeability values.

Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.

Download or read book MODELING OF CARBON DIOXIDE SEQUESTRATION IN A DEEP SALINE AQUIFER written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT MODELING OF CARBON DIOXIDE SEQUESTRATION IN A DEEP SALINE AQUIFER BAÞBUÐ, Baþar M.S., Department of Petroleum and Natural Gas Engineering Supervisor : Prof. Dr. Fevzi Gümrah July 2005, 245 pages CO2 is one of the hazardous greenhouse gases causing significant changes in the environment. The sequestering CO2 in a suitable geological medium can be a feasible method to avoid the negative effects of CO2 emissions in the atmosphere. CO2 sequestration is the capture of, separation, and long-term storage of CO2 in underground geological environments. A case study was simulated regarding the CO2 sequestration in a deep saline aquifer. The compositional numerical model (GEM) of the CMG software was used to study the ability of the selected aquifer to accept and retain the large quantities of injected CO2 at supercritical state for long periods of time (200 years). A field-scale model with two injectors and six water producers and a single-well aquifer model cases were studied. In a single-well aquifer model, the effects of parameters such as vertical to horizontal permeability ratio, aquifer pressure, injection rate, and salinity on the sequestration process were examined and the sensitivity analyses were performed after simulating the field-scale model. The supercritical CO2, one-state fluid which exhibits both gas and liquid-like properties, and gaseous CO2 were sequestered in the forms of free CO2 bubble, dissolved CO2 in brine and precipitated CO2 with calcite mineral in a deep saline aquifer. The isothermal condition was assumed during injection and sequestration processes. The change in porosity and permeability values that might have occurred due to mineralization and CO2 adsorption on rock were not considered in this study. Vertical to horizontal permeability ratio and initial pressure conditions were the most dominating parameters affecting the CO2 saturation in each layer of the aquifer whereas CO2 injection rate influenced CO2 saturation in middle and bot.