Download or read book A Simulation Model for the Evaluation of Material Flow Logistics of Production Processes written by Mark R. Bass and published by . This book was released on 1984 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Related Material Flow Simulation in Production and Logistics written by Sigrid Wenzel and published by Springer Nature. This book was released on 2024-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time an overview on the current approaches and applications of energy aspects in production and logistics by the use of simulation techniques. During the last decade, the importance of energy in the material flow processes has become more and more important. The pressure to reduce the environmental footprint of production and logistics systems will even intensify in future. Therefore, enterprises have started to integrate the use of energy into their planning processes much more than before, even designing feedback loops, e.g., from energy control to production control. This receives additional attention with the increasing use of renewable, but less reliable, energy sources. Care must be taken to establish processes that aim to use energy when it is available. As an example, many industrial processes like melting or coating have significant energy demands, but could vary the point of time of its consumption within specific limits, leading to a very high complexity. It discusses the construction and application of energy-specific performance indicators and analyzes the input information that needs to be acquired before implementing suitable models. On this basis, concrete technical solutions are introduced.
Download or read book Fundamentals of Production Logistics written by Peter Nyhuis and published by Springer Science & Business Media. This book was released on 2008-09-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: At last, here is what logistics researchers have been waiting for: a book that comprehensively encapsulates for the first time the fundamentals of modeling Logistic Operating Curves for production and storage processes. The text includes information on how they can be derived and calculated based on standard operating data. In doing so, the authors clearly demonstrate the mutual dependencies between the often contradictory logistic objectives, i.e. on the one hand low throughput times and high delivery reliability and on the other hand low WIP levels and high rates of utilization. Moreover, they also explain how these objectives can be improved using the Logistic Operating Curve Theory and why this method thus provides an interesting alternative to simulations.
Download or read book Material Flow Systems in Manufacturing written by J.M. Tanchoco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of contributions related to the design and control of material flow systems in manufacturing. Material flow systems in manufacturing covers a broad spectrum of topics directly affecting issues related to facilities design, material handling and production planning and control. In selecting the papers to include in this book, the scope was limited to the design and operational control aspects related to the physical move ment of parts, tools, containers and material handling devices. Recent develop ments in this area naturally led to concentration on flow systems involving cellular manufacturing, and automated transport equipment such as automated guided vehicles. However, the concepts discussed have general applicability to a wide range of manufacturing flow problems. The book is organized in five major sections: 1. design integration and justification; 2. cell design and material handling considerations; 3. alternative material flow paths; 4. operational control problems; and 5. tooling requirements and transport equipment.
Download or read book Development of Material Flow Logistics for a Manufacturing Facility Using Simulation written by William C. Moor and published by . This book was released on 1985* with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book simulation and logistics modeling for material flow in a warehouse written by mohammed khalil chikha and published by kalil chika. This book was released on 1990-01-19 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: this book explain how to model contents in a warehouse and take advanatge of the existing space in a warehouse
Download or read book Simulation Model Used as Design Improvement Decision Tool for Warehouse Material Flow written by Clifford Allen Smith and published by . This book was released on 2005 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basis for this thesis involved a six and a half month LFM internship at Efficient Storage, Shipping, and Selection. ES3, Efficient Storage, Shipping, and Selection, is a third party logistics firm that specializes in a vendor-neutral consolidation model for the food distribution industry. ES3 receives, stores, and ships multi-vendor products through a distribution center (DC) in York, Pennsylvania. The product is moved and stored by an Automated Storage and Retrieval System (ASRS) which consists of a network of conveyors, vertical lifts, and Selection and Retrieval Machines (SRMs). The ASRS system is not performing to the designed put-away and shipping rates, thus limiting the DC's overall performance during peak operations. The warehouse operations and warehouse design teams had numerous design suggestions for improving the ASRS operations, but it was difficult to predict the enhancement or impact on performance. A simulation model for the inbound system was created to analyze the impact, prioritize, and develop new ideas for improving the system.
Download or read book Supply Chain Optimisation written by Alexandre Dolgui and published by Springer Science & Business Media. This book was released on 2006-06-18 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects recent results in supply chain optimisation. It presents new approaches and methods based on operations research, artificial intelligence and advanced computing techniques for design of production systems, supply and inventory management, production planning and scheduling, location, transportation and logistics, and simulation in supply flow optimisation. The text presents a wide spectrum of optimisation problems taking into account supply chain paradigms, which are pivotal to improving productivity.
Download or read book Dynamic and Seamless Integration of Production Logistics and Traffic written by Eberhard Abele and published by Springer. This book was released on 2016-10-14 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes a basic framework for and specific insights into interdisciplinary connections between production, logistics, and traffic subsystems. The book is divided into two parts, the first of which presents an overview of interdisciplinarity in value-added networks and freight traffic. This includes an introduction to the topic and a description of an integrated framework of production, logistics, and traffic. Furthermore, it describes the barriers and challenges of interdisciplinary decision-making and project management. In turn, the second part presents domain-specific perspectives on interdisciplinary decision support, exploring domain-specific challenges of interdisciplinary interfaces and requirements for management methods and instruments from the standpoint of production management, logistics management, traffic management, and information technologies.
Download or read book 5th EAI International Conference on Management of Manufacturing Systems written by Lucia Knapčíková and published by Springer Nature. This book was released on 2021-08-02 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the proceedings of the 5th EAI International Conference on Management of Manufacturing Systems (MMS 2020), which took place online on October 27-29, 2020. The conference covers the management of manufacturing systems with support for Industry 4.0, logistics and intelligent manufacturing systems and applications, cooperation management, and its effective applications. Topics include RFID applications, economic impacts in logistics, ICT support for Industry 4.0, industrial and smart Logistics, intelligent manufacturing systems and applications, and much more. The topic is of interest to researchers, practitioners, students, and academics in manufacturing and communications engineering.
Download or read book 4th EAI International Conference on Management of Manufacturing Systems written by Lucia Knapcikova and published by Springer Nature. This book was released on 2020-03-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the proceedings of the 4th EAI International Conference on Management of Manufacturing Systems (MMS 2019), which took place in Krynica Zdroj, Poland, on October 8-10, 2019. The conference covered Management of Manufacturing Systems with support for Industry 4.0, Logistics and Intelligent Manufacturing Systems and Applications, Cooperation management and its effective applications. Topics include RFID Applications, Economic Impacts in Logistics, ICT Support for Industry 4.0, Industrial and Smart Logistics, Intelligent Manufacturing Systems and Applications, and much more.
Download or read book Information Technology Atlas Europe written by International Organisations Services and published by IOS Press. This book was released on 1990 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FlexSim in Academe Teaching and Research written by Pawel Pawlewski and published by Springer. This book was released on 2019-01-29 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a variety of teaching and academic research applications that effectively utilize FlexSim to: (1) provide guidelines, methods and tools for simulation modeling and analysis in a variety of educational settings and (2) address a variety of important design and operational issues in industry. Simulation is increasingly proving to be an important tool for supporting decision-making and problem-solving processes in many disparate domains, including the design, management and improvement of a wide range of operations systems in manufacturing, logistics, healthcare, etc. Achieving resource efficiency and minimizing negative externalities from operations represent two of today’s greatest challenges; modern simulation methods can help to overcome them. FlexSim is a prominent software package for developing discrete-event, agent-based, continuous, and hybrid simulations.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book Performance Evaluation Models for Distributed Service Networks written by Grzegorz Bocewicz and published by Springer Nature. This book was released on 2021-04-16 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel approaches to formulate, analyze, and solve problems in the area of distributed service networks, notably based on AI-related methods (parallel/cloud computing, declarative modeling, fuzzy methods). Distributed service networks are an important area of research and applications. The methods presented are meant to integrate both emerging and existing concepts and approaches for different types of production flows through synchronizations. An integration of logistics services (e.g., supply chains and projects portfolios), public and multimodal transport, traffic flow congestion management in ad hoc networks, design of high-performance cloud data centers, and milk-run distribution networks are shown as illustrations for the methods proposed. The book is of interest to researchers and practitioners in computer science, operations management, production control, and related fields.
Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1964 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Vehicles and Materials Transportation in the Manufacturing Sector Emerging Research and Opportunities written by Bandyopadhyay, Susmita and published by IGI Global. This book was released on 2017-07-12 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing industry has been optimized in recent years due to the rise of new technologies. These advances have paved the way for the development of intelligent vehicles. Intelligent Vehicles and Materials Transportation in the Manufacturing Sector: Emerging Research and Opportunities is a pivotal source of scholarly research on the various aspects of manufacturing vehicles with intelligent technology components. Including a range of perspectives on topics such as material handling, automated guided vehicles, and industrial robots, this book is ideally designed for engineers, academics, professionals, and practitioners actively involved in the manufacturing sector.
