Download or read book A Scanning Probe Study on Ferroelectrics written by Per Thomas Martin Tybell and published by . This book was released on 2000 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoscale Characterisation of Ferroelectric Materials written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the field of nanoscale characterization of ferroelectric materials using scanning probe microscopy (SPM). It addresses various imaging mechanisms of ferroelectric domains in SPM, quantitative analysis of the piezoresponse signals as well as basic physics of ferroelectrics at the nanoscale level, such as nanoscale switching, scaling effects, and transport behavior. This state-of-the-art review of theory and experiments on nanoscale polarization phenomena will be a useful reference for advanced readers as well for newcomers and graduate students interested in the SPM techniques. The non-specialists will obtain valuable information about different approaches to electrical characterization by SPM, while researchers in the ferroelectric field will be provided with details of SPM-based measurements of ferroelectrics.
Download or read book Scanning Probe Studies of Structural and Functional Properties of Ferroelectric Domains and Domain Walls written by Philippe Tückmantel and published by Springer Nature. This book was released on 2021-04-26 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the fascinating properties of domain walls in ferroelectric materials. Domain walls can be used as model systems to study fundamental aspects of interface physics, such as crackling noise, with implications extending to a broad variety of systems, from material fracture and earthquakes to solar flares and collective decision making. Ferroelectric domain walls also show functional properties absent from the domains themselves, such as enhanced conduction leading to the tantalizing possibility of reconfigurable nanoelectronic circuitry where domain walls are active components. This work discusses the crackling physics of domain walls in thin films of Pb(Zr0.2Ti0.8)O3, as well as links between the local conductivity of domain walls and nanoscale geometrical distortions due to defects, and discusses unusual polarization textures with rotational components at crossings of ferroelastic twin domains. The results presented in this thesis have important implications for the experimental study of crackling systems.
Download or read book A Scanning Probe Study on Ferroelectrics written by Thomas Tybell and published by . This book was released on 2000 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nous avons exploité la combinaison de matériaux sous forme de couches minces épitaxiales de haute qualité et une technique AFM pour visualiser et modifier la structure de domaines ferroélectriques d'une manière contrôlée et sub-micrométrique. Avec cette approche "sonde locale", nous avons étudié la question fondamentale de l'effet de taille dans les matériaux ferroélectriques, et démontré qu'une couche mince de 10 mailles unitaires reste ferroélectrique. En plus, grâce à ce contrôle local, nous avons développé une nouvelle technique permettant d'écrire des nano-structures électroniques en utilisant l'effet de champ ferroélectrique. Cette nouvelle idée a été démontrée jusqu'à une échelle de 350 nm dans des structures oxyde ferroélectrique/oxyde métallique. Cette technique ouvre de nouvelles possibilités, par exemple la création de structures mésoscopiques dans des supraconducteurs à haute température critique. Elle peut s'avérer également très importante pour l'étude de la ferroélectricité elle-même.
Download or read book Characterization of Ferroelectric Properties with Scanning Probe Microscopy and Synthesis of Lead free Ceramics written by Ralf-Peter Herber and published by . This book was released on 2008 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy Characterization Nanofabrication and Device Application of Functional Materials written by Paula M. Vilarinho and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the characteristic dimensions of electronic devices continue to shrink, the ability to characterize their electronic properties at the nanometer scale has come to be of outstanding importance. In this sense, Scanning Probe Microscopy (SPM) is becoming an indispensable tool, playing a key role in nanoscience and nanotechnology. SPM is opening new opportunities to measure semiconductor electronic properties with unprecedented spatial resolution. SPM is being successfully applied for nanoscale characterization of ferroelectric thin films. In the area of functional molecular materials it is being used as a probe to contact molecular structures in order to characterize their electrical properties, as a manipulator to assemble nanoparticles and nanotubes into simple devices, and as a tool to pattern molecular nanostructures. This book provides in-depth information on new and emerging applications of SPM to the field of materials science, namely in the areas of characterisation, device application and nanofabrication of functional materials. Starting with the general properties of functional materials the authors present an updated overview of the fundamentals of Scanning Probe Techniques and the application of SPM techniques to the characterization of specified functional materials such as piezoelectric and ferroelectric and to the fabrication of some nano electronic devices. Its uniqueness is in the combination of the fundamental nanoscale research with the progress in fabrication of realistic nanodevices. By bringing together the contribution of leading researchers from the materials science and SPM communities, relevant information is conveyed that allows researchers to learn more about the actual developments in SPM applied to functional materials. This book will contribute to the continuous education and development in the field of nanotechnology.
Download or read book Scanning Probe Microscopy written by Sergei V. Kalinin and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will be devoted to the technical aspects of electrical and electromechanical SPM probes and SPM imaging on the limits of resolution, thus providing technical introduction into the field. This volume will also address the fundamental physical phenomena underpinning the imaging mechanism of SPMs.
Download or read book Scanning Nonlinear Dielectric Microscopy written by Yasuo Cho and published by Woodhead Publishing. This book was released on 2020-05-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Nonlinear Dielectric Microscopy: Investigation of Ferroelectric, Dielectric, and Semiconductor Materials and Devices is the definitive reference on an important tool to characterize ferroelectric, dielectric and semiconductor materials. Written by the inventor, the book reviews the methods for applying the technique to key materials applications, including the measurement of ferroelectric materials at the atomic scale and the visualization and measurement of semiconductor materials and devices at a high level of sensitivity. Finally, the book reviews new insights this technique has given to material and device physics in ferroelectric and semiconductor materials. The book is appropriate for those involved in the development of ferroelectric, dielectric and semiconductor materials devices in academia and industry. - Presents an in-depth look at the SNDM materials characterization technique by its inventor - Reviews key materials applications, such as measurement of ferroelectric materials at the nanoscale and measurement of semiconductor materials and devices - Analyzes key insights on semiconductor materials and device physics derived from the SNDM technique
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the characterization of ferroelectric materials, including structural, electrical and multiphysic aspects, as well as innovative techniques for modeling and predicting the performance of these devices using phenomenological approaches and nonlinear methods. Hence, the aim of this book is to provide an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric system characterization and modeling, allowing a deep understanding of ferroelectricity.
Download or read book Investigation of Ferroelectric Domains with Scanning Probe Microscopy written by Rodrigo Pacher Fernandes and published by LAP Lambert Academic Publishing. This book was released on 2011-05 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent restriction on the use of lead in electric and electronic equipment is driving the interest for new ferroelectric materials that can substitute the widely used PZT. The recent discovery of very interesting properties in the morphotropic phase boundary of potassium sodium niobate (KNN) has triggered many investigations about the synthesis and properties of this family. This work aims at one common feature this important class of materials, the ferroelectric domains. The piezoresponse force microscopy is a powerful tool for the characterization of the domain structure and it is the main technique used in this work. The main focus of this work are the experiments about the switching behavior of KNN. The samples were produced with conventional sintering techniques and times set to achieve abnormal grain growth, providing large grains for the characterization of the domain structure. An interesting nanoindentation result of the microscopic mechanical properties of the KNN material is also presented.
Download or read book Applied Scanning Probe Methods III written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2006-04-28 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize of 1986 on Sc- ning Tunneling Microscopy sig- led a new era in imaging. The sc- ning probes emerged as a new i- trument for imaging with a pre- sion suf?cient to delineate single atoms. At ?rst there were two – the Scanning Tunneling Microscope, or STM, and the Atomic Force Mic- scope, or AFM. The STM relies on electrons tunneling between tip and sample whereas the AFM depends on the force acting on the tip when it was placed near the sample. These were quickly followed by the - gneticForceMicroscope,MFM,and the Electrostatic Force Microscope, EFM. The MFM will image a single magnetic bit with features as small as 10nm. With the EFM one can monitor the charge of a single electron. Prof. Paul Hansma at Santa Barbara opened the door even wider when he was able to image biological objects in aqueous environments. At this point the sluice gates were opened and a multitude of different instruments appeared. There are signi?cant differences between the Scanning Probe Microscopes or SPM, and others such as the Scanning Electron Microscope or SEM. The probe microscopes do not require preparation of the sample and they operate in ambient atmosphere, whereas, the SEM must operate in a vacuum environment and the sample must be cross-sectioned to expose the proper surface. However, the SEM can record 3D image and movies, features that are not available with the scanning probes.
Download or read book Scanning Probe Microscopy written by Adam Foster and published by Springer Science & Business Media. This book was released on 2006-10-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Probe Microscopy provides a comprehensive source of information for researchers, teachers, and graduate students about the rapidly expanding field of scanning probe theory. Written in the style of a textbook, it explains from scratch the theory behind today’s simulation techniques and gives examples of theoretical concepts through state-of-the-art simulations, including the means to compare these results with experimental data. The book provides the first comprehensive framework for electron transport theory with its various degrees of approximations used in today’s research, thus allowing extensive insight into the physics of scanning probes. Experimentalists will appreciate how the instrument's operation is changed by materials properties; theorists will understand how simulations can be directly compared to experimental data.
Download or read book Scanning Probe Microscopy For Energy Research Materials Devices And Applications written by Dawn Bonnell and published by World Scientific. This book was released on 2013-03-26 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficiency and life time of solar cells, energy and power density of the batteries, and costs of the fuel cells alike cannot be improved unless the complex electronic, optoelectronic, and ionic mechanisms underpinning operation of these materials and devices are understood on the nanometer level of individual defects. Only by probing these phenomena locally can we hope to link materials structure and functionality, thus opening pathway for predictive modeling and synthesis. While structures of these materials are now accessible on length scales from macroscopic to atomic, their functionality has remained Terra Incognitae. In this volume, we provide a summary of recent advances in scanning probe microscopy studies of local functionality of energy materials and devices ranging from photovoltaics to batteries, fuel cells, and energy harvesting systems. Recently emergent SPM modes and combined SPM-electron microscopy approaches are also discussed. Contributions by internationally renowned leaders in the field describe the frontiers in this important field.
Download or read book Solid State Physics written by S. L. Chaplot and published by Alpha Science Int'l Ltd.. This book was released on 2002 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the proceedings of the 44th Department of Atomic Engineering (DAE) Solid State Physics Symposium.With contributions of papers from institutions from around the world. Contains 316 research articles, including 28 invited papers, on a wide range of topics of current interest in solid state physics comprising the following categories: Phase Transitions Phonons Soft-condensed Matter Electronic Structure Novel Materials Superconductivity Experimental Techniques and Instrumentation Magnetism Liquids, Glasses and Amorphous Systems Transport Properties Relaxation Studies Semiconductor Physics Surface Science Key Features: Recent developments in Synchrotron Research Photo-electron Spectroscopy Newly emerging superconductors
Download or read book Scanning Probe Microscopy and Spectroscopy written by Dawn Bonnell and published by John Wiley & Sons. This book was released on 2000-12-05 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to basic theory and contemporary applications across a wide range of research disciplines Over the past two decades, scanning probe microscopies and spectroscopies have gained acceptance as indispensable characterization tools for an array of disciplines. This book provides novices and experienced researchers with a highly accessible treatment of basic theory, alongside detailed examples of current applications of both scanning tunneling and force microscopies and spectroscopies. Like its popular predecessor, Scanning Probe Microscopy and Spectroscopy, Second Edition features contributions from distinguished scientists working in a wide range of specialties at university, commercial, and government research labs around the world. Chapters have been edited for clarity, conciseness, and uniformity of presentation to provide professionals with a concise working reference to scanning probe microscopic and spectroscopic principles, techniques, and practices. This Second Edition has been substantially revised and expanded to reflect important advances and new applications. In addition to numerous examples, the Second Edition features expanded coverage of electrostatic and magnetic force microscopies, near-field optical microscopies, and new applications of buried interfaces in nanomechanics, electrochemistry, and biology. Scanning Probe Microscopy and Spectroscopy, Second Edition is an indispensable working resource for surface scientists, microscopists, and spectroscopists in materials science, chemistry, engineering, biochemistry, physics, and the life sciences. It is also an unparalleled reference text for advanced undergraduates and graduate students in those fields.
Download or read book Nanoscale Ferroelectrics and Multiferroics written by Miguel Alguero and published by John Wiley & Sons. This book was released on 2016-05-31 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch beleuchtet die wichtigsten Aspekte der Verarbeitung und Charakterisierung von Ferroelektrika und Multiferroika auf Nanoebene, präsentiert eine umfassende Beschreibung der jeweiligen Eigenschaften und legt dabei den Schwerpunkt auf die Unterscheidung von Größeneffekten bei extrinsischen Eigenschaften wie Rand- oder Interface-Effekte. Eingegangen wird auch auf neuartige Nanoebene. Das Fachbuch ist in drei Abschnitte unterteilt und beschreibt die Verarbeitung (Nanostrukturierung), Charakterisierung (nanostrukturierter Materialien) und Nanoeffekte. Unter Rückgriff auf die Synergien zwischen Nano-Ferroelektrika und -Multiferroika werden Materialien behandelt, die auf allen Ebenen einer Nanostrukturierung unterzogen werden, von Technologien für keramische Materialien wie ferroelektrische Nanopulver, nanostrukturierte Keramiken und Dickschichten sowie magnetoelektrische Nanokomposit-Materialien bis hin zu freistehenden Nanoobjekten mit spezifischen Geometrien wie Nanodrähte und Nanoröhren auf verschiedenen Entwicklungsstufen. Grundlage des Buches ist die europäische Wissensplattform im Wissenschaftsbereich innerhalb der Aktion von COST (Europäische Zusammenarbeit in Wissenschaft und Technik) zu ein- und mehrphasigen Ferroika und Multiferroika mit begrenzten Geometrien (SIMUFER, Ref. MP0904). Die Autoren der Kapitelbeiträge wurden sorgfältig ausgewählt, haben allesamt ganz wesentlich zur Wissensbasis für das jeweilige Thema beigetragen und gehören vor allem zu den renommiertesten Wissenschaftlern des Fachgebiets.
Download or read book Ferroelectric Domain Walls written by Jill Guyonnet and published by Springer Science & Business Media. This book was released on 2014-04-08 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the nano metric resolution of atomic force microscopy techniques, this work explores the rich fundamental physics and novel functionalities of domain walls in ferroelectric materials, the nano scale interfaces separating regions of differently oriented spontaneous polarization. Due to the local symmetry-breaking caused by the change in polarization, domain walls are found to possess an unexpected lateral piezoelectric response, even when this is symmetry-forbidden in the parent material. This has interesting potential applications in electromechanical devices based on ferroelectric domain patterning. Moreover, electrical conduction is shown to arise at domain walls in otherwise insulating lead zirconate titanate, the first such observation outside of multiferroic bismuth ferrite, due to the tendency of the walls to localize defects. The role of defects is then explored in the theoretical framework of disordered elastic interfaces possessing a characteristic roughness scaling and complex dynamic response. It is shown that the heterogeneous disorder landscape in ferroelectric thin films leads to a breakdown of the usual self-affine roughness, possibly related to strong pinning at individual defects. Finally, the roles of varying environmental conditions and defect densities in domain switching are explored and shown to be adequately modelled as a competition between screening effects and pinning.
