Download or read book A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-27 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes a dynamic model that was developed to predict changes in turbine tip clearance the radial distance between the end of a turbine blade and the abradable tip seal. The clearance is estimated by using a first principles approach to model the thermal and mechanical effects of engine operating conditions on the turbine sub-components. These effects are summed to determine the resulting clearance. The model is demonstrated via a ground idle to maximum power transient and a lapse-rate takeoff transient. Results show the model demonstrates the expected pinch point behavior. The paper concludes by identifying knowledge gaps and suggesting additional research to improve the model.Kypuros, Javier A. and Melcher, Kevin J.Glenn Research CenterSCALE MODELS; TEMPERATURE EFFECTS; TURBINE BLADES; MATHEMATICAL MODELS; DYNAMIC MODELS; CLEARANCES; BLADE TIPS; TURBINES; TAKEOFF; LAPSE RATE; IDENTIFYING; ESTIMATING...
Download or read book A Reduced Model for Prediction of Thermal and Rotational Effects on Turbine Tip Clearance written by and published by . This book was released on 2003 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2023 Asia Pacific International Symposium on Aerospace Technology APISAT 2023 Proceedings written by Song Fu and published by Springer Nature. This book was released on with total page 1991 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machinery Materials Science and Engineering Application IX written by M. Chen and published by IOS Press. This book was released on 2023-11-14 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: New engineering materials, techniques and applications are constantly being researched and developed, and keeping up to speed with the latest advances is crucial for engineers if they are to successfully address the challenges they face in their work. This book presents the selected proceedings of MMSE2023, the 9th International Conference on Advances in Machinery, Materials Science and Engineering Applications, jointly organized by the SAE-Supmeca, France and China University of Geosciences (Wuhan) and held on 22 and 23 July 2023 in Wuhan, China. For the past 12 years, this annual conference has collated recent advances and experiences, identified emerging trends and provided a platform for participants from academia and industry to exchange information and views, helping to address the world’s machinery and engineering challenges. The book contains 4 sections: mechanical engineering, material science and manufacturing technology; electrical engineering, automation and control; modeling, simulation and optimization techniques in engineering; and advanced engineering technologies and applications. A total of 241 submissions were received for MMSE2023, of which 151 papers were selected for the conference and for publication by means of a rigorous international peer-review process. These papers present exciting ideas and methods that will open novel research directions for different communities. Offering a current overview of the latest research and applications in machinery and materials-science engineering, the book will be of interest to all those working in the field.
Download or read book Research Technology 2003 written by and published by DIANE Publishing. This book was released on with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 41st AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit 10 13 July 2005 Tucson Arizona 05 4000 05 4049 written by and published by . This book was released on 2005 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 40th AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit July 11 14 2004 Fort Lauderdale FL 04 4150 04 4199 written by and published by . This book was released on 2004 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.
Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.
Download or read book Axial Turbine Aerodynamics for Aero engines written by Zhengping Zou and published by Springer. This book was released on 2018-01-11 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a monograph on aerodynamics of aero-engine gas turbines focusing on the new progresses on flow mechanism and design methods in the recent 20 years. Starting with basic principles in aerodynamics and thermodynamics, this book systematically expounds the recent research on mechanisms of flows in axial gas turbines, including high pressure and low pressure turbines, inter-turbine ducts and turbine rear frame ducts, and introduces the classical and innovative numerical evaluation methods in different dimensions. This book also summarizes the latest research achievements in the field of gas turbine aerodynamic design and flow control, and the multidisciplinary conjugate problems involved with gas turbines. This book should be helpful for scientific and technical staffs, college teachers, graduate students, and senior college students, who are involved in research and design of gas turbines.
Download or read book Propulsion and Power written by Joachim Kurzke and published by Springer. This book was released on 2018-05-28 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is written for engineers and students who wish to address the preliminary design of gas turbine engines, as well as the associated performance calculations, in a practical manner. A basic knowledge of thermodynamics and turbomachinery is a prerequisite for understanding the concepts and ideas described. The book is also intended for teachers as a source of information for lecture materials and exercises for their students. It is extensively illustrated with examples and data from real engine cycles, all of which can be reproduced with GasTurb (TM). It discusses the practical application of thermodynamic, aerodynamic and mechanical principles. The authors describe the theoretical background of the simulation elements and the relevant correlations through which they are applied, however they refrain from detailed scientific derivations.
Download or read book Heat Transfer in Gas Turbine Systems written by Richard J. Goldstein and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores recent developments in heat transfer and thermal control applied to modern high-temperature gas turbine systems. It examines experimental results and techniques computational studies and methods and design recommendations. Aspects of heat transfer in rotating machinery are studied as well as thermal aspects of other sections of the turbine (e.g. the compressor). Proceedings of an August 2000 conference.
Download or read book Three dimensional Navier Stokes Heat Transfer Predictions for Turbine Blade Rows written by Robert J. Boyle and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeroacoustics of Flight Vehicles written by Harvey H. Hubbard and published by . This book was released on 1991 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
Download or read book Advances in Wind Energy Conversion Technology written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2011-04-29 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an annual growth rate of over 35%, wind is the fastest growing energy source in the world today. As a result of intensive research and developmental efforts, the technology of generating energy from wind has significantly changed during the past five years. The book brings together all the latest aspects of wind energy conversion technology - right from the wind resource analysis to grid integration of the wind generated electricity. The chapters are contributed by academic and industrial experts having vast experience in these areas. Each chapter begins with an introduction explaining the current status of the technology and proceeds further to the advanced lever to cater for the needs of readers from different subject backgrounds. Extensive bibliography/references appended to each chapter give further guidance to the interested readers.
