Download or read book A Real time Emergency Response Workstation Using a 3 D Numerical Model Initialized with Sodar written by and published by . This book was released on 1993 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many emergency response dispersion modeling systems provide simple Gaussian models driven by single meteorological tower inputs to estimate the downwind consequences from accidental spills or stack releases. Complex meteorological or terrain settings demand more sophisticated resolution of the three-dimensional structure of the atmosphere to reliably calculate plume dispersion. Mountain valleys and sea breeze flows are two common examples of such settings. To address these complexities, the authors have implemented the three-dimensional diagnostic MATHEW mass-adjusted wind field and ADPIC particle-in-cell dispersion models on a workstation for use in real-time emergency response modeling. MATHEW/ADPIC have shown their utility in a variety of complex settings over the last 15 years within the Department of Energy's Atmospheric Release Advisory Capability (ARAC) project. The models are initialized using an array of surface wind measurements from meteorological towers coupled with vertical profiles from an acoustic sounder (sodar). The workstation automatically acquires the meteorological data every 15 minutes. A source term is generated using either defaults or a real-time stack monitor. Model outputs include contoured isopleths displayed on site geography or plume densities shown over 3-D color shaded terrain. The models are automatically updated every 15 minutes to provide the emergency response manager with a continuous display of potentially hazardous ground-level conditions if an actual release were to occur. Model run time is typically less than 2 minutes on 6 megaflop ((approximately)30 MIPS) workstations. Data acquisition, limited by dial-up modem communications, requires 3 to 5 minutes.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Directed Research and Development written by Lawrence Livermore National Laboratory and published by . This book was released on 1992 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Topical Meeting on Environmental Transport and Dosimetry written by American Nuclear Society and published by . This book was released on 1993 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Meteorology in Managing the Environment in the 90s written by and published by . This book was released on 1993 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994 with total page 1716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INIS Atomindex written by and published by . This book was released on 1994 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1994 with total page 1746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the American Nuclear Society written by American Nuclear Society and published by . This book was released on 1993 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Pollution Modeling and Its Application VIII written by H. Van Dop and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1949, when the North Atlantic Treaty was ratified, one of its articles explicitly noted '1hat member countries should contribute towards the further development of peaceful and friendly international relations." Specific problems related to the human environment were addressed by the Committee of Challenges of Modern Society (CCMS) of NATO, established in 1969. This provided a framework within which a series of International Technical Meetings (ITMs) on Air Pollution Modelling has been held. This volume documents the proceedings of the 18th meeting in this series. Science, like the arts and sports, provides an ideal vehicle for "developing peaceful and friendly international relations". National boundaries have never been barriers to the movement of air pollution, and fortunately this has also proved true of scientists studying the transport of air pollution. It is thus satisfying to record that since the mid-seventies it has been commonplace to find Eastern European scientists among attendees at the ITMs which have (in a very modest way) participated in a precursor to the process which has led to historical changes in Europe and which will undoubtedly lead to a tremendous increase in personal and intellectual exchange on a worldwide basis.
Download or read book Meteorological monitoring guidance for regulatory modeling applications written by and published by DIANE Publishing. This book was released on 2000 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Climates written by T. R. Oke and published by Cambridge University Press. This book was released on 2017-09-14 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban Climates is the first full synthesis of modern scientific and applied research on urban climates. The book begins with an outline of what constitutes an urban ecosystem. It develops a comprehensive terminology for the subject using scale and surface classification as key constructs. It explains the physical principles governing the creation of distinct urban climates, such as airflow around buildings, the heat island, precipitation modification and air pollution, and it then illustrates how this knowledge can be applied to moderate the undesirable consequences of urban development and help create more sustainable and resilient cities. With urban climate science now a fully-fledged field, this timely book fulfills the need to bring together the disparate parts of climate research on cities into a coherent framework. It is an ideal resource for students and researchers in fields such as climatology, urban hydrology, air quality, environmental engineering and urban design.
Download or read book Automated Surface Observing System written by and published by . This book was released on 1998 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probability and Statistics for Engineering and the Sciences written by Jay L. Devore and published by . This book was released on 2008-02-27 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction to probability and statistics will give you the solid grounding you need no matter what your engineering specialty. Through the use of lively and realistic examples, the author helps you go beyond simply learning about statistics to actually putting the statistical methods to use. Rather than focus on rigorous mathematical development and potentially overwhelming derivations, the book emphasizes concepts, models, methodology, and applications that facilitate your understanding.
Download or read book Advances in Wind Energy Conversion Technology written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2011-04-29 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an annual growth rate of over 35%, wind is the fastest growing energy source in the world today. As a result of intensive research and developmental efforts, the technology of generating energy from wind has significantly changed during the past five years. The book brings together all the latest aspects of wind energy conversion technology - right from the wind resource analysis to grid integration of the wind generated electricity. The chapters are contributed by academic and industrial experts having vast experience in these areas. Each chapter begins with an introduction explaining the current status of the technology and proceeds further to the advanced lever to cater for the needs of readers from different subject backgrounds. Extensive bibliography/references appended to each chapter give further guidance to the interested readers.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Geo information for Disaster Management written by Peter van Oosterom and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 1412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geo-information technology can be of considerable use in disaster management, but with considerable challenge in integrating systems, interoperability and reliability. This book provides a broad overview of geo-information technology, software, systems needed, currently used and to be developed for disaster management. The text invites discussion on systems and requirements for use of geo-information under time and stress constraints and unfamiliar situations, environments and circumstances.
