Download or read book A Projection Transformation Method for Nearly Singular Surface Boundary Element Integrals written by Ken Hayami and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: In three dimensional boundary element analysis, computation of integrals is an important aspect since it governs the accuracy of the analysis and also because it usually takes the major part of the CPU time. The integrals which determine the influence matrices, the internal field and its gradients contain (nearly) singular kernels of order lIr a (0:= 1,2,3,4,.··) where r is the distance between the source point and the integration point on the boundary element. For planar elements, analytical integration may be possible 1,2,6. However, it is becoming increasingly important in practical boundary element codes to use curved elements, such as the isoparametric elements, to model general curved surfaces. Since analytical integration is not possible for general isoparametric curved elements, one has to rely on numerical integration. When the distance d between the source point and the element over which the integration is performed is sufficiently large compared to the element size (d> 1), the standard Gauss-Legendre quadrature formula 1,3 works efficiently. However, when the source is actually on the element (d=O), the kernel 1I~ becomes singular and the straight forward application of the Gauss-Legendre quadrature formula breaks down. These integrals will be called singular integrals. Singular integrals occur when calculating the diagonals of the influence matrices.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Boundary Element Method Volume 1 written by L. C. Wrobel and published by John Wiley & Sons. This book was released on 2002-04-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical techniquewhich has enjoyed increasing popularity over the last two decades,and is now an established alternative to traditional computationalmethods of engineering analysis. The main advantage of the BEM isits unique ability to provide a complete solution in terms ofboundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with acomprehensive and up-to-date account of the boundary element methodand its application to solving engineering problems. Each volume isa self-contained book including a substantial amount of materialnot previously covered by other text books on the subject. Volume 1covers applications to heat transfer, acoustics, electrochemistryand fluid mechanics problems, while volume 2 concentrates on solidsand structures, describing applications to elasticity, plasticity,elastodynamics, fracture mechanics and contact analysis. The earlychapters are designed as a teaching text for final yearundergraduate courses. Both volumes reflect the experience of theauthors over a period of more than twenty years of boundary element research. This volume, Applications in Thermo-Fluids and Acoustics, provides acomprehensive presentation of the BEM from fundamentals to advancedengineering applications and encompasses: Steady and transient heat transfer Potential and viscous fluid flows Frequency and time-domain acoustics Corrosion and other electrochemical problems. A unique feature of this book is an in-depth presentation of BEMformulations in all the above fields, including detaileddiscussions of the basic theory, numerical algorithms and practicalengineering applications of the method. Written by an internationally recognised authority in the field,this is essential reading for postgraduates, researchers andpractitioners in civil, mechanical and chemical engineering andapplied mathematics.
Download or read book The Boundary Element Method Volume 2 written by M. H. Aliabadi and published by John Wiley & Sons. This book was released on 2002-04-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical technique, which has enjoyed increasing popularity over the last two decades, and is now an established alternative to traditional computational methods of engineering analysis. The main advantage of the BEM is its unique ability to provide a complete solution in terms of boundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with a comprehensive and up-to-date account of the boundary element method and its application to solving engineering problems. Each volume is a self-contained book including a substantial amount of material not previously covered by other text books on the subject. Volume 1 covers applications to heat transfer, acoustics, electrochemistry and fluid mechanics problems, while volume 2 concentrates on solids and structures, describing applications to elasticity, plasticity, elastodynamics, fracture mechanics and contact analysis. The early chapters are designed as a teaching text for final year undergraduate courses. Both volumes reflect the experience of the authors over a period of more than twenty years of boundary element research. This volume, Applications in Solids and Structures, provides a comprehensive presentation of the BEM from fundamentals to advanced engineering applications and encompasses: Elasticity for 2D, 3D and Plates and Shells Non-linear, Transient and Thermal Stress Analysis Crack Growth and Multi-body Contact Mechanics Sensitivity Analysis and Optimisation Analysis of Assembled Structures. An important feature of this book is the in-depth presentation of BEM formulations in all the above fields, including detailed discussions of the basic theory, numerical algorithms and where possible simple examples are included, as well as test results for practical engineering applications of the method. Although most of the methods presented are the latest developments in the field, the author has included some simple techniques, which are helpful in understanding the computer implementation of BEM. Another notable feature is the comprehensive presentation of a new generation of boundary elements known as the Dual Boundary Element Method. Written by an internationally recognised authority in the field, this is essential reading for postgraduates, researchers and practitioners in Aerospace, Mechanical and Civil Engineering and Applied Mathematics.
Download or read book 2D 3D Boundary Element Programming in Petroleum Engineering and Geomechanics written by Nobuo Morita and published by Elsevier. This book was released on 2020-11-17 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D/3D Boundary Element Programming in Petroleum Engineering and Geomechanics, Volume 72, is designed to make it easy for researchers, engineers and students to begin writing boundary element programs. This reference covers the fundamentals, theoretical developments, programming and applications. Both fluid flow through porous media and structural problems are used for coding exercises. Included computer programs may be used as starting codes; after modifications, they can be applied to real world problems. The book covers topics around mesh generation, 3D boundary element coding, and interface coding for controlling mesh generation, and plotting results. Includes interactive 2D and 3D coding exercises that readers can modify based on need Features research on the most recent developments in indirect and dual boundary element methods Contains case studies showing examples and applications of the theories presented in the book
Download or read book Singular Integrals in Boundary Element Methods written by Vladimír Sládek and published by Computational Mechanics. This book was released on 1998 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text in singular integrals in boundary element methods. Topics covered include: treatment in crack problems; regularization of boundary integral equations by the derivative transfer method; regularization and evaluation of singular domain integrals in boundary element methods and others.
Download or read book Current Distributions and Electrode Shape Changes in Electrochemical Systems written by Johan Deconinck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reponds to the increasing demand of computer mo- delling of electrochemical processes in order to improve their speed and efficiency. The fundamental transport equa- tions in dilute solutions are given and it is established in detail under what circumstances a potential model with non- linear boundary conditions, involved by electrode reactions, can beused. Attention is directed towards the most impor- tant solution techniquesFEM, FDM and BEM and towards the solution of the non-linear system of equations (Successive Substitution, Newton-Raphson). Using the BEM, several two- dimensional and axisymmetrical examples of current density distributions are given and quantitative data, obtained in a copper electro-refining cell, are compared with calculated results. Applying Faraday's Law and the BEM, simulation of electro-deposition, electro-chemical levelling and machining are treated. Accuracy and stabilityare emphasized.
Download or read book Reliability and Optimization of Structural Systems 91 written by Rüdiger Rackwitz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains 38 papers presented at the 4th Working Conference on "Rel iability· and Optimization of Structural Systems", held at the Technical University of Munich, Germany, September 11- 13, 1991. The Working Conference was organised by the IFIP (Interna tional Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the fourth in a series, following similar conferences held at the University of Aalborg, Den mark, May 1987, at the Imperial College, London, UK, September 1988 and at the University of California, Berkeley, California, USA, March 1990. The Working Conference was attended by 54 participants from 16 countries. The objectives of Working Group 7.5 are: • to promote modern structural systems optimization and reliability theory, • to advance international cooperation in the field of structural system optimization and reliability theory, • to stimulate research, development and application of structural system optimization and reli ability theory, • to further the dissemination and exchange of information on reliability and optimization of structural systems • to encourage education in structural system optimization and reliability theory. At present the members of the Working Group are: A. H.-S. Ang, U.S.A. M. Grimmelt, FRG G. A ugwti, Italy N. C. Lind, Canada M. J. Baker, UK H. O. Mad&en, Denmark P. Bjerager, Norway R. E. Melcher~, Australia C. A. Cornell, U.S.A. F. Mo~e~, U.S.A.
Download or read book Boundary Element Method XVI written by C. A. Brebbia and published by Computational Mechanics. This book was released on 1994 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title contains the edited proceedings from the 16th International Conference on Boundary Element Methods, held in July 1994. The included papers consider the applications of BEM to various mechanics problems and covers the topics of diffusion, acoustics, heat transfer, inverse problems, numerical and computational aspects, adaptive techniques, stress and fracture mechanics, elastodynamics, geomechanics and coupling problems.
Download or read book Computer Modeling in Engineering Sciences written by and published by . This book was released on 2006 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Mechanics 95 written by S.N. Atluri and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 3181 pages. Available in PDF, EPUB and Kindle. Book excerpt: AI!, in the earlier conferences (Tokyo, 1986; Atlanta, 1988, Melbourne, 1991; and Hong Kong, 1992) the response to the call for presentations at ICES-95 in Hawaii has been overwhelming. A very careful screening of the extended abstracts resulted in about 500 paper being accepted for presentation. Out of these, written versions of about 480 papers reached the conference secretariat in Atlanta in time for inclusion in these proceedings. The topics covered at ICES-95 range over the broadest spectrum of computational engineering science. The editors thank the international scientific committee, for their advice and encouragement in making ICES-95 a successful scientific event. Special thanks are expressed to the International Association for Boundary Elements Methods for hosting IABEM-95 in conjunction with ICES-95. The editors here express their deepest gratitude to Ms. Stacy Morgan for her careful handling of a myriad of details of ICES-95, often times under severe time constraints. The editors hope that the readers of this proceedings will find a kaleidoscopic view of computational engineering in the year 1995, as practiced in various parts of the world. Satya N. Atluri Atlanta, Georgia, USA Genki Yagawa Tokyo,Japan Thomas A. Cruse Nashville, TN, USA Organizing Committee Professor Genki Yagawa, University of Tokyo, Japan, Chair Professor Satya Atluri, Georgia Institute of Technology, U.S.A.
Download or read book Boundary Elements XXII written by International Conference on the Boundary Element Method and published by WIT Press (UK). This book was released on 2000 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering state-of-the-art developments in this field of engineering analysis, this volume consists of the papers presented at an international conference devoted to the boundary element method. It addresses areas of active research related to the BEM community, such as meshless techniques, advanced formulations and high performance computing. Further work in the dual reciprocity method is also discussed. Other papers reflect late-20th century advances in fluid dynamics, fracture and damage mechanics, acoustics and electromagnetism, while there is also a section on the industrial implementation of the technique, and the way in which it can be used as a tool.
Download or read book Boundary Elements and Other Mesh Reduction Methods XXXVI written by X. W. Gao and published by WIT Press. This book was released on 2013-12-11 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference on Boundary Elements and Mesh Reduction Methods (BEM/MRM) is recognised as the international forum for the latest advances in these techniques and their applications in science and engineering. Launched in 1978 the Conference continues to attract original contributions and has become the forum for their rapid dissemination throughout the international scientific community. Practically all new boundary element ideas have first appeared in the proceedings of these meetings.
Download or read book Boundary Elements XIV written by C. A. Brebbia and published by . This book was released on 1992 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Elements XVII written by C. A. Brebbia and published by Computational Mechanics. This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Symmetric Galerkin Boundary Element Method written by Alok Sutradhar and published by Springer Science & Business Media. This book was released on 2008-09-26 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symmetric Galerkin Boundary Element Method presents an introduction as well as recent developments of this accurate, powerful, and versatile method. The formulation possesses the attractive feature of producing a symmetric coefficient matrix. In addition, the Galerkin approximation allows standard continuous elements to be used for evaluation of hypersingular integrals. FEATURES • Written in a form suitable for a graduate level textbook as well as a self-learning tutorial in the field. • Covers applications in two-dimensional and three-dimensional problems of potential theory and elasticity. Additional basic topics involve axisymmetry, multi-zone and interface formulations. More advanced topics include fluid flow (wave breaking over a sloping beach), non-homogeneous media, functionally graded materials (FGMs), anisotropic elasticity, error estimation, adaptivity, and fracture mechanics. • Presents integral equations as a basis for the formulation of general symmetric Galerkin boundary element methods and their corresponding numerical implementation. • Designed to convey effective unified procedures for the treatment of singular and hypersingular integrals that naturally arise in the method. Symbolic codes using Maple® for singular-type integrations are provided and discussed in detail. • The user-friendly adaptive computer code BEAN (Boundary Element ANalysis), fully written in Matlab®, is available as a companion to the text. The complete source code, including the graphical user-interface (GUI), can be downloaded from the web site http://www.ghpaulino.com/SGBEM_book. The source code can be used as the basis for building new applications, and should also function as an effective teaching tool. To facilitate the use of BEAN, a video tutorial and a library of practical examples are provided.
Download or read book The Cumulative Book Index written by and published by . This book was released on 1994 with total page 2318 pages. Available in PDF, EPUB and Kindle. Book excerpt: A world list of books in the English language.
