Download or read book A Practical Guide to Airplane Performance and Design written by Donald R. Crawford and published by . This book was released on 1981 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flight Theory and Aerodynamics written by Charles E. Dole and published by John Wiley & Sons. This book was released on 2016-11-21 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pilot's guide to aeronautics and the complex forces of flight Flight Theory and Aerodynamics is the essential pilot's guide to the physics of flight, designed specifically for those with limited engineering experience. From the basics of forces and vectors to craft-specific applications, this book explains the mechanics behind the pilot's everyday operational tasks. The discussion focuses on the concepts themselves, using only enough algebra and trigonometry to illustrate key concepts without getting bogged down in complex calculations, and then delves into the specific applications for jets, propeller crafts, and helicopters. This updated third edition includes new chapters on Flight Environment, Aircraft Structures, and UAS-UAV Flight Theory, with updated craft examples, component photos, and diagrams throughout. FAA-aligned questions and regulatory references help reinforce important concepts, and additional worked problems provide clarification on complex topics. Modern flight control systems are becoming more complex and more varied between aircrafts, making it essential for pilots to understand the aerodynamics of flight before they ever step into a cockpit. This book provides clear explanations and flight-specific examples of the physics every pilot must know. Review the basic physics of flight Understand the applications to specific types of aircraft Learn why takeoff and landing entail special considerations Examine the force concepts behind stability and control As a pilot, your job is to balance the effects of design, weight, load factors, and gravity during flight maneuvers, stalls, high- or low-speed flight, takeoff and landing, and more. As aircraft grow more complex and the controls become more involved, an intuitive grasp of the physics of flight is your most valuable tool for operational safety. Flight Theory and Aerodynamics is the essential resource every pilot needs for a clear understanding of the forces they control.

Download or read book General Aviation Aircraft Design written by Snorri Gudmundsson and published by Butterworth-Heinemann. This book was released on 2013-09-03 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the right answer the first time with this useful handbook of preliminary aircraft design. Written by an engineer with close to 20 years of design experience, General Aviation Aircraft Design: Applied Methods and Procedures provides the practicing engineer with a versatile handbook that serves as the first source for finding answers to realistic aircraft design questions. The book is structured in an "equation/derivation/solved example" format for easy access to content. Readers will find it a valuable guide to topics such as sizing of horizontal and vertical tails to minimize drag, sizing of lifting surfaces to ensure proper dynamic stability, numerical performance methods, and common faults and fixes in aircraft design. In most cases, numerical examples involve actual aircraft specs. Concepts are visually depicted by a number of useful black-and-white figures, photos, and graphs (with full-color images included in the eBook only). Broad and deep in coverage, it is intended for practicing engineers, aerospace engineering students, mathematically astute amateur aircraft designers, and anyone interested in aircraft design. - Organized by articles and structured in an "equation/derivation/solved example" format for easy access to the content you need - Numerical examples involve actual aircraft specs - Contains high-interest topics not found in other texts, including sizing of horizontal and vertical tails to minimize drag, sizing of lifting surfaces to ensure proper dynamic stability, numerical performance methods, and common faults and fixes in aircraft design - Provides a unique safety-oriented design checklist based on industry experience - Discusses advantages and disadvantages of using computational tools during the design process - Features detailed summaries of design options detailing the pros and cons of each aerodynamic solution - Includes three case studies showing applications to business jets, general aviation aircraft, and UAVs - Numerous high-quality graphics clearly illustrate the book's concepts (note: images are full-color in eBook only)

Download or read book Aircraft Performance Design written by John David Anderson and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1999 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Balancing technical material with important historical aspects of the invention and design of aeroplanes, this book develops aircraft performance techniques from first principles and applies them to real aeroplanes.

Download or read book Aircraft Design written by Mohammad H. Sadraey and published by John Wiley & Sons. This book was released on 2012-11-20 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive approach to the air vehicle design process using the principles of systems engineering Due to the high cost and the risks associated with development, complex aircraft systems have become a prime candidate for the adoption of systems engineering methodologies. This book presents the entire process of aircraft design based on a systems engineering approach from conceptual design phase, through to preliminary design phase and to detail design phase. Presenting in one volume the methodologies behind aircraft design, this book covers the components and the issues affected by design procedures. The basic topics that are essential to the process, such as aerodynamics, flight stability and control, aero-structure, and aircraft performance are reviewed in various chapters where required. Based on these fundamentals and design requirements, the author explains the design process in a holistic manner to emphasise the integration of the individual components into the overall design. Throughout the book the various design options are considered and weighed against each other, to give readers a practical understanding of the process overall. Readers with knowledge of the fundamental concepts of aerodynamics, propulsion, aero-structure, and flight dynamics will find this book ideal to progress towards the next stage in their understanding of the topic. Furthermore, the broad variety of design techniques covered ensures that readers have the freedom and flexibility to satisfy the design requirements when approaching real-world projects. Key features: • Provides full coverage of the design aspects of an air vehicle including: aeronautical concepts, design techniques and design flowcharts • Features end of chapter problems to reinforce the learning process as well as fully solved design examples at component level • Includes fundamental explanations for aeronautical engineering students and practicing engineers • Features a solutions manual to sample questions on the book’s companion website Companion website - www.wiley.com/go/sadraey

Download or read book Basics of R C Model Aircraft Design written by Andy Lennon and published by Air Age. This book was released on 1996 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to designing radio control model airplanes. Andy Lennon presents a thorough and comprehensive introduction to the intriguing world of model aerodynamics. Whatever your modeling background, this book will be a valuable reference source in your R/C library and will never be outdated. Fully illustrated.

Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.

Download or read book Performance of Light Aircraft written by John T. Lowry and published by AIAA. This book was released on 1999 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pilots, aviation students, kitplane builders, aircraft fleet operators and aeronautical engineers can all determine how their propeller-driven airplanes will perform, under any conditions, by using the step-by-step bootstrap approach introduced in this book. A few routine flying manoeuvres (climbs, glides, a level speed run) will give the necessary nine numbers. High-school level calculations then give performance numbers with much greater detail and accuracy than many other methods - for the reader's individual aircraft.

Download or read book Small Unmanned Fixed wing Aircraft Design written by Andrew J. Keane and published by John Wiley & Sons. This book was released on 2017-08-29 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small Unmanned Fixed-wing Aircraft Design is the essential guide to designing, building and testing fixed wing UAVs (or drones). It deals with aircraft from two to 150 kg in weight and is based on the first-hand experiences of the world renowned UAV team at the UK’s University of Southampton. The book covers both the practical aspects of designing, manufacturing and flight testing and outlines and the essential calculations needed to underpin successful designs. It describes the entire process of UAV design from requirements definition to configuration layout and sizing, through preliminary design and analysis using simple panel codes and spreadsheets to full CFD and FEA models and on to detailed design with parametric CAD tools. Its focus is on modest cost approaches that draw heavily on the latest digital design and manufacturing methods, including a strong emphasis on utilizing off-the-shelf components, low cost analysis, automated geometry modelling and 3D printing. It deliberately avoids a deep theoretical coverage of aerodynamics or structural mechanics; rather it provides a design team with sufficient insights and guidance to get the essentials undertaken more pragmatically. The book contains many all-colour illustrations of the dozens of aircraft built by the authors and their students over the last ten years giving much detailed information on what works best. It is predominantly aimed at under-graduate and MSc level student design and build projects, but will be of interest to anyone engaged in the practical problems of getting quite complex unmanned aircraft flying. It should also appeal to the more sophisticated aero-modeller and those engaged on research based around fixed wing UAVs.

Download or read book Aircraft Performance Theory for Pilots written by Peter J. Swatton and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new European Joint Aviation Requirements (JARs) lay down rules governing the minimum levels of performance which must be attained by every type of public transport aeroplane. These rules cover matters such as weight, altitude and temperature, take-off and landing distance, cruise flight level and speed, and descent angle and rate. The subject of aircraft performance forms an important part of all JAR Flight Crew Licensing examinations for commercial and airline transport pilot licences, and this book provides a clear but authoritative text on a difficult topic. It will also be of interest to commercial pilots needing to upgrade their annual ground test to JAR standards, and to flight planners, operations controllers and airport operators.

Download or read book Aircraft Engine Design written by Jack D. Mattingly and published by AIAA. This book was released on 2002 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A design textbook attempting to bridge the gap between traditional academic textbooks, which emphasize individual concepts and principles; and design handbooks, which provide collections of known solutions. The airbreathing gas turbine engine is the example used to teach principles and methods. The first edition appeared in 1987. The disk contains supplemental material. Annotation c. Book News, Inc., Portland, OR (booknews.com).

Download or read book RCadvisor s Model Airplane Design Made Easy written by Carlos Reyes and published by www.RCadvisor.com. This book was released on 2009 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build and fly your very own model airplane design. Using clear explanations, you will learn about important design trade-offs and how to choose among them. The latest research and techniques are discussed using easy to understand language. You will discover: The special challenges faced by the smaller models and how to overcome them. How to choose the right material for each part of the airplane. Easy rules for selecting the right power system, gas or electric. When it makes sense to use one of the innovative KFm airfoils. Pros and cons of canard and multi-wing configurations. A step-by-step design process that includes goal setting and flight testing. In-depth discussions of important topics like airfoils and wing design. The sources of air drag and how to minimize their impact. ADVANCE PRAISE "This book is a joy to read! The writing style and wit add dimension in a way that is rarely found in today's reference materials. If someone has considered designing their own airplane and been put off because of complicated formulas, vocabulary and reference style that would bore even an engineer, this will convince them to go ahead and try it. Written with real people in mind and not engineers - and I mean that in a good way. This is a book that will reside along the other favorites on my bookshelf. Carlos really managed to produce a book that will last a long time and become one of the standards for modelers." - Greg Gimlick, Electrics columnist, Model Aviation magazine "RCAdvisor's Model Airplane Design Made Easy is the ultimate model airplane design book for both beginning and experienced modelers." - Richard Kline, Inventor, KFm airfoils "RCadvisor's Model Airplane Design Made Easy is a real contribution to the world's literature on the subject. It provides an excellent bridge between full scale aviation and aeromodeling, showing the relationship between the two, for better understanding of the differences and similarities which should be applied for good model performance. While thorough in detail, the book is also easily readable so that the information is simple to understand. It is a very good combination of theory and practical application. Nicely illustrated, the book is also full of common sense explanations and references to other sources of information." - John Worth, former President and Executive Director of the AMA "Carlos Reyes personably leads the reader through some basic aerodynamics, materials considerations, electric power system planning and a practical application of theory as it is applied to a finished flying model. The background history of various types of aircraft shows the development of aviation and how it relates to the models that we build and fly today, as well as how models have influenced general aviation. It is always exciting to find some 'new to me' concepts and theories, and there were several in this well-written narrative." - Ken Myers, Editor, Ampeer electric flight newsletter "No matter how long you've been aeromodelling, or what your interests are in our great hobby, the greatest thrill of all is standing behind a unique model that you've designed and built yourself, from a blank sheet of paper - or even a blank CAD file - and preparing to make that first take off. So sit yourself down in a comfy chair, read RCadvisor's Model Airplane Design Made Easy and set off on aeromodelling's greatest adventure. Let Carlos Reyes - an aeromodeller of long standing and great talent - take you through the mysteries of how to arrive at the point that every lover of model aircraft should experience." - Dereck Woodward, aeromodeller, designer and magazine writer for the past fifty years

Download or read book Simplified Aircraft Design for Homebuilders written by Daniel P. Raymer and published by Design Dimentions Press. This book was released on 2003 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Easy-to-follow, step-by-step methods to lay out, analyse, and optimise your new homebuilt aircraft concept; Industry methods distilled to the essence, and written in a straight forward, easy-to-read style; No derivations, proofs, or complicated equations. Every step is illustrated with an all-new design example that is followed through from beginning to end.

Download or read book Optimizing Small Multi Rotor Unmanned Aircraft written by Stephen D. Prior and published by CRC Press. This book was released on 2018-09-18 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide was written to capture the author’s practical experience of designing, building and testing multi-rotor drone systems over the past decade. The lack of one single source of useful information meant that the past 10 years has been a steep learning curve, a lot of self-tuition and many trial and error tests. Lessons learnt the hard way are not always the best way to learn. This book will be useful for the amateur drone pilot who wants to build their own system from first principles, as well as the academic researcher investigating novel design concepts and future drone applications.

Download or read book Airplane Design VII written by Jan Roskam and published by DARcorporation. This book was released on 1985 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aircraft Aerodynamic Design written by András Sóbester and published by John Wiley & Sons. This book was released on 2014-11-17 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal aircraft design is impossible without a parametric representation of the geometry of the airframe. We need a mathematical model equipped with a set of controls, or design variables, which generates different candidate airframe shapes in response to changes in the values of these variables. This model's objectives are to be flexible and concise, and capable of yielding a wide range of shapes with a minimum number of design variables. Moreover, the process of converting these variables into aircraft geometries must be robust. Alas, flexibility, conciseness and robustness can seldom be achieved simultaneously. Aircraft Aerodynamic Design: Geometry and Optimization addresses this problem by navigating the subtle trade-offs between the competing objectives of geometry parameterization. It beginswith the fundamentals of geometry-centred aircraft design, followed by a review of the building blocks of computational geometries, the curve and surface formulations at the heart of aircraft geometry. The authors then cover a range of legacy formulations in the build-up towards a discussion of the most flexible shape models used in aerodynamic design (with a focus on lift generating surfaces). The book takes a practical approach and includes MATLAB®, Python and Rhinoceros® code, as well as ‘real-life’ example case studies. Key features: Covers effective geometry parameterization within the context of design optimization Demonstrates how geometry parameterization is an important element of modern aircraft design Includes code and case studies which enable the reader to apply each theoretical concept either as an aid to understanding or as a building block of their own geometry model Accompanied by a website hosting codes Aircraft Aerodynamic Design: Geometry and Optimization is a practical guide for researchers and practitioners in the aerospace industry, and a reference for graduate and undergraduate students in aircraft design and multidisciplinary design optimization.

Download or read book Introduction to Flight Testing and Applied Aerodynamics written by Barnes Warnock McCormick and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2011 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction into the art and science of measuring and predicting airplane performance, ""Introduction to Flight Testing and Applied Aerodynamics"" will benefit students, homebuilders, pilots, and engineers in learning how to collect and analyze data relevant to the takeoff, climb, cruise, handling qualities, descent, and landing of an aircraft. This textbook presents a basic and concise analysis of airplane performance, stability, and control. Basic algebra, trigonometry, and some calculus are used. Topics discussed include: Engine and propeller performance; Estimation of drag; Airplane dynamics; Wing spanwise lift distributions; Flight experimentation; Airspeed calibration; Takeoff performance; Climb performance; and, Dynamic and static stability. Special features: examples containing student-obtained data about specific airplanes and engines; simple experiments that determine an airplane's performance and handling qualities; and, end-of-chapter problems (with answers supplied in an appendix).