Download or read book A Photosensitive Polymer Composite written by Kojima and published by . This book was released on 1989 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.

Download or read book Polymer Based Advanced Functional Composites for Optoelectronic and Energy Applications written by Nithin Kundachira Subramani and published by Elsevier. This book was released on 2021-05-28 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-Based Advanced Functional Composites for Optoelectronic and Energy Applications explains how polymer-based smart composites and nanocomposites can be prepared and utilized for novel optical, sensor and energy-related applications. The book begins with an introductory section on the fundamentals of smart polymer composites, including structure-property relationships and conjugated polymers. Other sections examine optical applications, including the use of polymer-based smart composites for luminescent solar concentrators, electro-chromic applications, light conversion applications, ultraviolet shielding applications, LED encapsulation applications, sensor applications, including gas-sensing, strain sensing, robotics and tactile sensors, with final sections covering energy-related applications, including energy harvesting, conversion, storage, vibrational energy harvesting, and more. This is an essential guide for researchers, scientists and advanced students in smart polymers and materials, polymer science, composites, nanocomposites, electronics and materials science. It is also a valuable book for scientists, R&D professionals and engineers working with products that could utilize smart polymer composites. Provides thorough coverage of the latest pioneering research in the field of polymer-based smart composites Offers an applications-oriented approach, enabling the reader to understand state-of-the-art optical, sensor and energy applications Includes an in-depth introductory section, covering important aspects such as structure-property relationships and the role of conjugated polymers

Download or read book Photosensitive Polymeric Composites for Information Technologies written by Irina Davidenko and published by Cambridge Scholars Publishing. This book was released on 2019-07-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the modern conceptions of polymeric composites. It also focuses on investigations of polymeric composites for information technologies, such as polarization holography, light electro-optical modulators, creation of polarization sensitive gratings, and photovoltaic elements.

Download or read book Self Healing Polymers and Polymer Composites written by Ming Qiu Zhang and published by John Wiley & Sons. This book was released on 2011-06-28 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-art guide on the interdisciplinary aspects of design, chemistry, and physical properties of bio-inspired self-healing polymers Inspired by the natural self-healing properties that exist in living organisms—for example, the regenerative ability of humans to heal from cuts and broken bones—interest in self-healing materials is gaining more and more attention. Addressing the broad advances being made in this emerging science, Self-Healing Polymers and Polymer Composites incorporates fundamentals, theory, design, fabrication, characterization, and application of self-healing polymers and polymer composites to describe how to prepare self-healing polymeric materials, how to increase the speed of crack repair below room temperature, and how to broaden the spectrum of healing agent species. Some of the information readers will discover in this book include: Focus on engineering aspects and theoretical backgrounds of smart materials The systematic route for developing techniques and materials to advance the research and applications of self-healing polymers Integration of existing techniques and introduction of novel synthetic approaches and target-oriented materials design and fabrication Techniques for characterizing the healing process of polymers and applications of self-healing polymers and polymer composites Practical aspects of self-healing technology in various industrial fields, such as electronics, automotive, construction, chemical production, and engineering With this book, readers will have a comprehensive understanding of this emerging field, while new researchers will understand the framework necessary for innovating new self-healing solutions.

Download or read book Tribology of Polymer and Polymer Composites for Industry 4 0 written by Hemalata Jena and published by Springer Nature. This book was released on 2021-08-23 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book first introduces polymers and polymer composites which are widely used in different industrial and engineering applications where the proper selection of fiber, filler, and polymer can be tailored for particular application. The primary objective of this book is to broaden the knowledge of tribology of polymer composites in a new dimension for Industry 4.0. For instance, the book covers polymer composites used as self-lubricating material used in the automotive industry and other manufacturing equipment to reduce the effect of energy loss due to friction and wear. This book is of interest to researchers and industrial practitioners who work in the field of tribology of polymer composites, manufacturing equipment and production engineering.

Download or read book Polymer Composites Biocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2013-11-11 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are materials in which the matrix polymer is reinforced with organic/inorganic fillers of a definite size and shape, leading to enhanced performance of the resultant composite. These materials find a wide number of applications in such diverse fields as geotextiles, building, electronics, medical, packaging, and automobiles. This first systematic reference on the topic emphasizes the characteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia, government, industry, as well as private research institutions across the globe, and adopt a practical approach here, covering such aspects as the preparation, characterization, properties and theory of polymer composites. The book begins by discussing the state of the art, new challenges, and opportunities of various polymer composite systems. Interfacial characterization of the composites is discussed in detail, as is the macro- and micromechanics of the composites. Structure-property relationships in various composite systems are explained with the help of theoretical models, while processing techniques for various macro- to nanocomposite systems and the influence of processing parameters on the properties of the composite are reviewed in detail. The characterization of microstructure, elastic, viscoelastic, static and dynamic mechanical, thermal, tribological, rheological, optical, electrical and barrier properties are highlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites; Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.

Download or read book Solid Rocket Motor Performance Analysis and Prediction written by William H. Miller and published by . This book was released on 1971 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials Polymers and Composites written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2021-11-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews several domains of polymer science, especially new trends in polymerization synthesis, physical-chemical properties, and inorganic systems. Composites and nanocomposites are also covered in this book, emphasizing nanotechnologies and their impact on the enhancement of physical and mechanical properties of these new materials. Kinetics and simulation are discussed and also considered as promising techniques for achieving chemistry and predicting physical property goals. This book presents a selection of interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research.

Download or read book Nanophysics Nanophotonics Surface Studies and Applications written by Olena Fesenko and published by Springer. This book was released on 2016-08-10 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some of the latest achievements in nanotechnology and nanomaterials from leading researchers in Ukraine, Europe, and beyond. It features contributions from participants in the 3rd International Science and Practice Conference Nanotechnology and Nanomaterials (NANO2015) held in Lviv, Ukraine on August 26-30, 2015. The International Conference was organized jointly by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), Ivan Franko National University of Lviv (Ukraine), University of Turin (Italy), Pierre and Marie Curie University (France), and European Profiles A.E. (Greece). Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results on topics ranging from nanooptics, nanoplasmonics, and interface studies to energy storage and biomedical applications.

Download or read book Inorganic Whisker Reinforced Polymer Composites written by Qiuju Sun and published by CRC Press. This book was released on 2015-08-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inorganic-Whisker-Reinforced Polymer Composites: Synthesis, Properties and Applications gives a comprehensive presentation of inorganic microcrystalline fibers, or whiskers, a polymer composite filler. It covers whisker synthesis, surface modification, applications for reinforcing polymer-matrix composites, and analysis of resulting filled polymer

Download or read book High Performance Polymers written by Johannes Karl Fink and published by William Andrew. This book was released on 2014-07-04 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approaching the material from a chemistry and engineering perspective, High Performance Polymers presents the most reliable and current data available about state-of-the-art polymerization, fabrication, and application methods of high performance industrial polymers. Chapters are arranged according to the chemical constitution of the individual classes, beginning with main chain carbon-carbon polymers and leading to ether-containing, sulfur-containing, and so on. Each chapter follows an easily readable template, provides a brief overview and history of the polymer, and continues on to such sub-topics as monomers; polymerization and fabrication; properties; fabrication methods; special additives; applications; suppliers and commercial grades; safety; and environmental impact and recycling. High Performance Polymers brings a wealth of up-to-date, high performance polymer data to you library, in a format that allows for either a fast fact-check or more detailed study. In this new edition the data has been fully updated to reflect all developments since 2008, particularly in the topics of monomers, synthesis of polymers, special polymer types, and fields of application. Presents the state-of-the-art polymerization, fabrication and application methods of high performance industrial polymers Provides fundamental information for practicing engineers working in industries that develop advanced applications (including electronics, automotive and medical) Discusses environmental impact and recycling of polymers

Download or read book Advances in Biomedical Polymers and Composites written by Kunal Pal and published by Elsevier. This book was released on 2022-09-14 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Biomedical Polymers and Composites: Materials and Applications is a comprehensive guide to polymers and polymer composites for biomedical applications, bringing together detailed information on their preparation, properties, cutting-edge technologies, innovative materials and key application areas. Sections introduce polymers and composites in biomedical applications and cover characterization techniques, preparation and properties of composites and gel-based systems. Innovative technologies and instruments used in the fabrication of polymer composites for biomedical applications are then presented in detail, including 3D bioprinting, 4D printing, electrospinning, stimuli-responsive polymers and quantum dots. This is a valuable resource for anyone looking to gain a broader understanding of polymers and composites for biomedical applications. In addition, it is ideal for readers who want to conduct interdisciplinary research or explore new avenues for research and development. Provides broad, systematic and detailed coverage of preparation methods, properties, technologies, structures and applications Explores the state-of-the-art in biomedical polymers, including gene delivery, oleogels, bigels, 3D bioprinting, 4D printing and antiviral materials Offers analysis and comparison of experimental data on physical properties and explains environmental, ethical and medical guidelines

Download or read book Structure and Properties of Additive Manufactured Polymer Components written by Klaus Friedrich and published by Woodhead Publishing. This book was released on 2020-06-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure and Properties of Additive Manufactured Polymer Components provides a state-of-the-art review from leading experts in the field who discuss key developments that have appeared over the last decade or so regarding the use of additive manufacturing (AM) methods in the production of neat and reinforced polymeric components. A major focus is given to materials science aspects, i.e., how the quality of the polymer preforms, the parameters of the chosen AM method, and how these factors can affect the microstructure and properties of the final product. The book not only covers production technologies and the relationship between processing, microstructure and fundamental properties of the produced parts, but also gives readers ideas on the use of AM polymer parts in medicine, automotive, aerospace, tribology, electronics, and more. Focuses on industrial aspects and applications Dedicated purely to recent advances in polymer composite additive manufacturing Emphasizes processing, structure and property relationships

Download or read book Extrinsic and Intrinsic Approaches to Self Healing Polymers and Polymer Composites written by Ming Qiu Zhang and published by John Wiley & Sons. This book was released on 2022-04-13 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the cutting-edge in self-healing polymers and composites In Extrinsic and Intrinsic Approaches to Self-Healing Polymers and Polymer Composites, a pair of distinguished materials scientists delivers an insightful and up-to-date exploration of the fundamentals, theory, design, fabrication, characterization, and application of self-healing polymers and polymer composites. The book discusses how to prepare self-healing polymeric materials, how to increase the speed of crack repair, high temperature applications, and how to broaden the spectrum of healing agent species. The authors emphasize the integration of existing techniques with novel synthetic approaches for target-oriented materials design and fabrication. They provide a comprehensive view of this emerging field, allowing new researchers to gather a firm understanding of the framework for creating new materials or applications. Additionally, the book includes: A thorough introduction to the field of self-healing polymers and polymer composites, including the advances made by various laboratories and the challenges, trends, and future directions that characterize modern research in the area Comprehensive explorations of the self-healing strategies proposed by the authors, including addition polymerization, systems-based microcapsules and plastic tubes, and more Practical discussions of the application of reversible S-S bonds in self-healing polymers In-depth examinations of intrinsic self-healing via reversible C-ON bonds Perfect for polymer and materials scientists, chemists, and engineers, Extrinsic and Intrinsic Approaches to Self-Healing Polymers and Polymer Composites will also earn a place in the libraries of professionals working in the polymer, coatings, paints, medical, defense, and pharmaceutical industries.

Download or read book 3D and 4D Printing of Polymer Nanocomposite Materials written by Kishor Kumar Sadasivuni and published by Elsevier. This book was released on 2019-10-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and 4D Printing of Polymer Nanocomposite Materials: Processing, Applications, and Challenges covers advanced 3D and 4D printing processes and the latest developments in novel polymer-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The book presents processes, materials selection, and printability issues, along with sections on the preparation of polymer composite materials for 3D and 4D printing. Across the book, advanced printing techniques are covered and discussed thoroughly, including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting. Finally, major applications areas are discussed, including electronic, aerospace, construction and biomedical applications, with detailed information on the design, fabrication and processing methods required in each case. Provides a thorough, clear understanding of polymer preparation techniques and 3D and 4D printing processes, with a view to specific applications Examines synthesis, formation methodology, the dispersion of fillers, characterization, properties, and performance of polymer nanocomposites Explores the possibilities of 4D printing, covering the usage of stimuli responsive hydrogels and shape memory polymers

Download or read book Additive Manufacturing for Polymers written by Jianlei Wang and published by Frontiers Media SA. This book was released on 2023-10-16 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing, also known as additive manufacturing, is a manufacturing process that connects materials layer by layer to produce a solid object based on networked digital model files. Advantages of 3D printing over traditional manufacturing include less material consumption, lower costs, faster production process, customizable degrees of freedom and complexity of geometric shapes. The traditional manufacturing of a functional structural part often requires multiple independent process steps, while 3D printing can fabricate the same part in one step, enabling small batch production and customization of personalized products. Due to the diversity of materials available, 3D printing for polymer can be used to create lightweight complex structures in aerospace, models of architectural structures, art reproductions, and biological tissues and organs.