Download or read book Digital Signal Processors written by Sen-Maw Kuo and published by Prentice Hall. This book was released on 2005 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This CD contains five appendices from the book and programs (MATLAB, Simulink, C, and TMS320C5000 assembly) with their associated data files.
Download or read book High Performance Memory Systems written by Haldun Hadimioglu and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The State of Memory Technology Over the past decade there has been rapid growth in the speed of micropro cessors. CPU speeds are approximately doubling every eighteen months, while main memory speed doubles about every ten years. The International Tech nology Roadmap for Semiconductors (ITRS) study suggests that memory will remain on its current growth path. The ITRS short-and long-term targets indicate continued scaling improvements at about the current rate by 2016. This translates to bit densities increasing at two times every two years until the introduction of 8 gigabit dynamic random access memory (DRAM) chips, after which densities will increase four times every five years. A similar growth pattern is forecast for other high-density chip areas and high-performance logic (e.g., microprocessors and application specific inte grated circuits (ASICs)). In the future, molecular devices, 64 gigabit DRAMs and 28 GHz clock signals are targeted. Although densities continue to grow, we still do not see significant advances that will improve memory speed. These trends have created a problem that has been labeled the Memory Wall or Memory Gap.
Download or read book Real Time Digital Signal Processing written by Sen M. Kuo and published by John Wiley & Sons. This book was released on 2013-08-05 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines both the DSP principles and real-time implementations and applications, and now updated with the new eZdsp USB Stick, which is very low cost, portable and widely employed at many DSP labs. Real-Time Digital Signal Processing introduces fundamental digital signal processing (DSP) principles and will be updated to include the latest DSP applications, introduce new software development tools and adjust the software design process to reflect the latest advances in the field. In the 3rd edition of the book, the key aspect of hands-on experiments will be enhanced to make the DSP principles more interesting and directly interact with the real-world applications. All of the programs will be carefully updated using the most recent version of software development tools and the new TMS320VC5505 eZdsp USB Stick for real-time experiments. Due to its lower cost and portability, the new software and hardware tools are now widely used in university labs and in commercial industrial companies to replace the older and more expensive generation. The new edition will have a renewed focus on real-time applications and will offer step-by-step hands-on experiments for a complete design cycle starting from floating-point C language program to fixed-point C implementation, code optimization using INTRINSICS, and mixed C-and-assembly programming on fixed-point DSP processors. This new methodology enables readers to concentrate on learning DSP fundamentals and innovative applications by relaxing the intensive programming efforts, namely, the traditional DSP assembly coding efforts. The book is organized into two parts; Part One introduces the digital signal processing principles and theories, and Part Two focuses on practical applications. The topics for the applications are the extensions of the theories in Part One with an emphasis placed on the hands-on experiments, systematic design and implementation approaches. The applications provided in the book are carefully chosen to reflect current advances of DSP that are of most relevance for the intended readership. Combines both the DSP principles and real-time implementations and applications using the new eZdsp USB Stick, which is very low cost, portable and widely employed at many DSP labs is now used in the new edition Places renewed emphasis on C-code experiments and reduces the exercises using assembly coding; effective use of C programming, fixed-point C code and INTRINSICS will become the main focus of the new edition. Updates to application areas to reflect latest advances such as speech coding techniques used for next generation networks (NGN), audio coding with surrounding sound, wideband speech codec (ITU G.722.2 Standard), fingerprint for image processing, and biomedical signal processing examples. Contains new addition of several projects that can be used as semester projects; as well as new many new real-time experiments using TI’s binary libraries – the experiments are prepared with flexible interface and modular for readers to adapt and modify to create other useful applications from the provided basic programs. Consists of more MATLAB experiments, such as filter design, algorithm evaluation, proto-typing for C-code architecture, and simulations to aid readers to learn DSP fundamentals. Includes supplementary material of program and data files for examples, applications, and experiments hosted on a companion website. A valuable resource for Postgraduate students enrolled on DSP courses focused on DSP implementation & applications as well as Senior undergraduates studying DSP; engineers and programmers who need to learn and use DSP principles and development tools for their projects.
Download or read book A Textbook of Digital Signal Processing written by R.S. Kaler and published by I K International Pvt Ltd. This book was released on 2009-07-11 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theoretical and application topics in digital signal processing (DSP). The topics here comprise clever DSP "tricks of the trade" not covered in traditional DSP textbooks. Here we go beyond the standard DSP fundamentals textbook and present new, but tried-n-true, clever implementations of digital filter design, spectrum analysis, signal generation, high-speed function approximation and various other DSP functions. With this book we wished to create a resource that is relevant to the needs of the working DSP engineer by helping bridge the theory-to-practice gap between introductory DSP textbooks and the esoteric, difficult to understand, academic journals. This book will be useful to experienced DSP engineers, due to its gentle tutorial style it will also be of considerable value to the DSP beginner. The mathematics used herein is simple algebra and the arithmetic of complex numbers, making this material accessible to a wide engineering and scientific audience. Fortunately, the chapter topics in this book are written in a standalone manner, so the subject matter can be read in any desired order.
Download or read book Programmable Digital Signal Processors written by Yu Hen Hu and published by CRC Press. This book was released on 2001-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Presents the latest developments in the prgramming and design of programmable digital signal processors (PDSPs) with very-long-instruction word (VLIW) architecture, algorithm formulation and implementation, and modern applications for multimedia processing, communications, and industrial control."
Download or read book Digital Signal Processing for Multimedia Systems written by Keshab K. Parhi and published by CRC Press. This book was released on 2018-10-03 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a wide selection of multimedia applications, programmable and custom architectures for the implementations of multimedia systems, and arithmetic architectures and design methodologies. The book covers recent applications of digital signal processing algorithms in multimedia, presents high-speed and low-priority binary and finite field arithmetic architectures, details VHDL-based implementation approaches, and more.
Download or read book Real time Digital Signal Processing written by Sen-Maw Kuo and published by 清华大学出版社有限公司. This book was released on 2003 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance VLSI Digital Signal Processing Architecture and Chip Design written by Peter Paul Reusens and published by . This book was released on 1983 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Signal Processing 101 written by Michael Parker and published by Newnes. This book was released on 2010-05-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing 101: Everything You Need to Know to Get Started provides a basic tutorial on digital signal processing (DSP). Beginning with discussions of numerical representation and complex numbers and exponentials, it goes on to explain difficult concepts such as sampling, aliasing, imaginary numbers, and frequency response. It does so using easy-to-understand examples and a minimum of mathematics. In addition, there is an overview of the DSP functions and implementation used in several DSP-intensive fields or applications, from error correction to CDMA mobile communication to airborne radar systems. This book is intended for those who have absolutely no previous experience with DSP, but are comfortable with high-school-level math skills. It is also for those who work in or provide components for industries that are made possible by DSP. Sample industries include wireless mobile phone and infrastructure equipment, broadcast and cable video, DSL modems, satellite communications, medical imaging, audio, radar, sonar, surveillance, and electrical motor control. - Dismayed when presented with a mass of equations as an explanation of DSP? This is the book for you! - Clear examples and a non-mathematical approach gets you up to speed with DSP - Includes an overview of the DSP functions and implementation used in typical DSP-intensive applications, including error correction, CDMA mobile communication, and radar systems
Download or read book Applications of Digital Signal Processing written by Christian Cuadrado-Laborde and published by BoD – Books on Demand. This book was released on 2011-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the reader will find a collection of chapters authored/co-authored by a large number of experts around the world, covering the broad field of digital signal processing. This book intends to provide highlights of the current research in the digital signal processing area, showing the recent advances in this field. This work is mainly destined to researchers in the digital signal processing and related areas but it is also accessible to anyone with a scientific background desiring to have an up-to-date overview of this domain. Each chapter is self-contained and can be read independently of the others. These nineteenth chapters present methodological advances and recent applications of digital signal processing in various domains as communications, filtering, medicine, astronomy, and image processing.
Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.
Download or read book Parallel Computers 2 written by R.W Hockney and published by CRC Press. This book was released on 1988-01-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition, parallel computing technology has gained considerable momentum. A large proportion of this has come from the improvement in VLSI techniques, offering one to two orders of magnitude more devices than previously possible. A second contributing factor in the fast development of the subject is commercialization. The supercomputer is no longer restricted to a few well-established research institutions and large companies. A new computer breed combining the architectural advantages of the supercomputer with the advance of VLSI technology is now available at very attractive prices. A pioneering device in this development is the transputer, a VLSI processor specifically designed to operate in large concurrent systems. Parallel Computers 2: Architecture, Programming and Algorithms reflects the shift in emphasis of parallel computing and tracks the development of supercomputers in the years since the first edition was published. It looks at large-scale parallelism as found in transputer ensembles. This extensively rewritten second edition includes major new sections on the transputer and the OCCAM language. The book contains specific information on the various types of machines available, details of computer architecture and technologies, and descriptions of programming languages and algorithms. Aimed at an advanced undergraduate and postgraduate level, this handbook is also useful for research workers, machine designers, and programmers concerned with parallel computers. In addition, it will serve as a guide for potential parallel computer users, especially in disciplines where large amounts of computer time are regularly used.
Download or read book Digital Signal Processing written by K. Deergha Rao and published by Springer. This book was released on 2018-04-14 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive exposition of all major topics in digital signal processing (DSP). With numerous illustrative examples for easy understanding of the topics, it also includes MATLAB-based examples with codes in order to encourage the readers to become more confident of the fundamentals and to gain insights into DSP. Further, it presents real-world signal processing design problems using MATLAB and programmable DSP processors. In addition to problems that require analytical solutions, it discusses problems that require solutions using MATLAB at the end of each chapter. Divided into 13 chapters, it addresses many emerging topics, which are not typically found in advanced texts on DSP. It includes a chapter on adaptive digital filters used in the signal processing problems for faster acceptable results in the presence of changing environments and changing system requirements. Moreover, it offers an overview of wavelets, enabling readers to easily understand the basics and applications of this powerful mathematical tool for signal and image processing. The final chapter explores DSP processors, which is an area of growing interest for researchers. A valuable resource for undergraduate and graduate students, it can also be used for self-study by researchers, practicing engineers and scientists in electronics, communications, and computer engineering as well as for teaching one- to two-semester courses.
Download or read book High Performance VLSI Algorithms and Architectures for Digital Signal Processing written by Paul Ming Yu Chau and published by . This book was released on 1987 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Embedded Computing Handbook written by David R. Martinez and published by CRC Press. This book was released on 2018-10-03 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several decades, applications permeated by advances in digital signal processing have undergone unprecedented growth in capabilities. The editors and authors of High Performance Embedded Computing Handbook: A Systems Perspective have been significant contributors to this field, and the principles and techniques presented in the handbook are reinforced by examples drawn from their work. The chapters cover system components found in today’s HPEC systems by addressing design trade-offs, implementation options, and techniques of the trade, then solidifying the concepts with specific HPEC system examples. This approach provides a more valuable learning tool, Because readers learn about these subject areas through factual implementation cases drawn from the contributing authors’ own experiences. Discussions include: Key subsystems and components Computational characteristics of high performance embedded algorithms and applications Front-end real-time processor technologies such as analog-to-digital conversion, application-specific integrated circuits, field programmable gate arrays, and intellectual property–based design Programmable HPEC systems technology, including interconnection fabrics, parallel and distributed processing, performance metrics and software architecture, and automatic code parallelization and optimization Examples of complex HPEC systems representative of actual prototype developments Application examples, including radar, communications, electro-optical, and sonar applications The handbook is organized around a canonical framework that helps readers navigate through the chapters, and it concludes with a discussion of future trends in HPEC systems. The material is covered at a level suitable for practicing engineers and HPEC computational practitioners and is easily adaptable to their own implementation requirements.
Download or read book Krishna s Digital Signal Processing Principles and Applications written by and published by Krishna Prakashan Media. This book was released on with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Computing written by R.J. Allan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade high performance computing has demonstrated the ability to model and predict accurately a wide range of physical properties and phenomena. Many of these have had an important impact in contributing to wealth creation and improving the quality of life through the development of new products and processes with greater efficacy, efficiency or reduced harmful side effects, and in contributing to our ability to understand and describe the world around us. Following a survey ofthe U.K.'s urgent need for a supercomputingfacility for aca demic research (see next chapter), a 256-processor T3D system from Cray Research Inc. went into operation at the University of Edinburgh in the summer of 1994. The High Performance Computing Initiative, HPCI, was established in November 1994 to support and ensure the efficient and effective exploitation of the T3D (and future gen erations of HPC systems) by a number of consortia working in the "frontier" areas of computational research. The Cray T3D, now comprising 512 processors and total of 32 CB memory, represented a very significant increase in computing power, allowing simulations to move forward on a number offronts. The three-fold aims of the HPCI may be summarised as follows; (1) to seek and maintain a world class position incomputational scienceand engineering, (2) to support and promote exploitation of HPC in industry, commerce and business, and (3) to support education and training in HPC and its application.
