Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Powder Coatings and Fluidized Bed Techniques written by Maurice William Ranney and published by William Andrew. This book was released on 1971 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Coatings and Thin Films 1991 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this two-volume set represent the work of over two hundred international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and thin film processes. The two hundred and six papers attest to the fact that Metallurgical Coatings is a rapidly growing field attracting experts from the large materials, scientific and technical community. The papers will be a useful and dynamic tool for those wishing to increase their knowledge on metallurgical coatings, as well as providing a guide to recent literature in this field.
Download or read book Metallurgical Coatings and Thin Films 1992 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the increasingly important requirements for high technology materials is that they possess near-surface properties different to their bulk properties. Specific surface properties are generally achieved through the use of these films or coatings or by modifying the structure or composition of the near surface. This two-volume work contains 157 papers covering a wide range of topics involving films, coatings, and modified surfaces. All aspects of the development of deposition technologies are addressed including basic research, applied research, applications development and full scale industrial production. The work will be of interest to materials scientists, physicists, electronic, chemical and mechanical engineers, and chemists.
Download or read book Handbook of Membrane Separations written by Anil Kumar Pabby and published by CRC Press. This book was released on 2008-07-07 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Membrane Separations: Chemical, Pharmaceutical, and Biotechnological Applications provides detailed information on membrane separation technologies as they have evolved over the past decades. To provide a basic understanding of membrane technology, this book documents the developments dealing with these technologies. It explo
Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Fluid Bed Technology in Materials Processing written by C. K. Gupta and published by CRC Press. This book was released on 1998-12-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Bed Technology in Materials Processing comprehensively covers the various aspects of fluidization engineering and presents an elaborate examination of the applications in a multitude of materials processing techniques. This singular resource discusses: All the basic aspects of fluidization essential to understand and learn about various techniques The range of industrial applications Several examples in extraction and process metallurgy Fluidization in nuclear engineering and nuclear fuel cycle with numerous examples Innovative techniques and several advanced concepts of fluidization engineering, including use and applications in materials processing as well as environmental and bio-engineering Pros and cons of various fluidization equipment and specialty of their applications, including several examples Design aspects and modeling Topics related to distributors effects and flow regimes A separate chapter outlines the importance of fluidization engineering in high temperature processing, including an analysis of the fundamental concepts and applications of high temperature fluidized bed furnaces for several advanced materials processing techniques. Presenting information usually not available in a single source, Fluid Bed Technology in Materials Processing serves Fluidization engineers Practicing engineers in process metallurgy, mineral engineering, and chemical metallurgy Researchers in the field of chemical, metallurgical, nuclear, biological, environmental engineering Energy engineering professionals High temperature scientists and engineers Students and professionals who adopt modeling of fluidization in their venture for design and scale up
Download or read book ASM Materials Engineering Dictionary written by Joseph R. Davis and published by ASM International. This book was released on 1992-01-01 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 10,000 entries (arranged from A to Z) are supplemeted by hundreds of figures (approximately 700) & tables (more than 150) that clearly demonstrate the principles & concepts behind important manufacturing processes, illustrate the important structures, or provide representative compositional & property data for a wide variety of ferrous & nonferrous materials, plastics, ceramics, composites (resin-metal-carbon-&-cermaic-matrix) & adhesives. "Technical Briefs" provide encyclopedic-type coverage for some 64 key material groups. Each Technical Brief contains a "Recommended Reading" list to guide the user to additional information. Published by ASM International (tm), Materials Park, OH 44073.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1981 with total page 1370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Electroplating Anodizing Metal Treatment Hand Book written by NPCS Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2003-02-08 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface finishing is a broad range of industrial processes that alter the surface of a manufactured item to achieve a certain property. Currently, the trend is towards surface treatments. Surface engineering techniques are generally used to develop a wide range of functional properties, including physical, chemical, electrical, electronic, magnetic, mechanical, wear-resistant and corrosion-resistant properties at the required substrate surfaces. In general, coatings are desirable, or even necessary, for a variety of reasons including economics, material conservation, unique properties, or the engineering and design flexibility which can be obtained by separating the surface properties from the bulk properties. Surface engineered products thus increase performance, reduce costs, control surface properties independently of the substrate and medium, thus offering an enormous potential in the finishing Industry. Electrodepositing of metals is a very significant industrial process. Electroplating is both an art and science .It entailed adhering a thin metal coating to an object by immersing it into an electrically charged solvent containing the dissolved plating metal. Electroplating served a number of functions, such as protecting from corrosion and wear, decoration, and electrical shielding. Anodizing most closely resembles standard electroplating. Anodizing or anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts. Anodizing increases corrosion resistance and wears resistance, and provides better adhesion for paint primers and glues than bare metal. Anodic films are most commonly applied to protect aluminium alloys.The aim of this handbook is to give the reader a perspective on several metal surface treatment techniques which are generally followed in the finishing Industry. This is a unique compilation and it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals along with various formulae of bath solutions, current density, deposit thickness, manufacturing processes, various ingredients used in these processes. It is a very useful guide for the readers, engineers, scientists, practitioners of surface treatment, researchers, students, entrepreneurs and others involved in materials adhesion and processing.
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1995 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thomas Register of American Manufacturers written by and published by . This book was released on 2002 with total page 1944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This basic source for identification of U.S. manufacturers is arranged by product in a large multi-volume set. Includes: Products & services, Company profiles and Catalog file.
Download or read book Thermal Spray 2001 written by Christopher C. Berndt and published by ASM International. This book was released on 2001-01-01 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductivity and Applications written by Hoi S. Kwok and published by Springer. This book was released on 1989 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference was organized by the New York State Institute on Superconductivity. This Proceedings comprises a collection of 80 papers that proceed from plenary reviews to sections on thin films, physical properties, theory, processing, and applications. Annotation copyright Book News, Inc. Portlan
