Download or read book The System Designer s Guide to VHDL AMS written by Peter J. Ashenden and published by Elsevier. This book was released on 2002-09-10 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand is exploding for complete, integrated systems that sense, process, manipulate, and control complex entities such as sound, images, text, motion, and environmental conditions. These systems, from hand-held devices to automotive sub-systems to aerospace vehicles, employ electronics to manage and adapt to a world that is, predominantly, neither digital nor electronic. To respond to this design challenge, the industry has developed and standardized VHDL-AMS, a unified design language for modeling digital, analog, mixed-signal, and mixed-technology systems. VHDL-AMS extends VHDL to bring the successful HDL modeling methodology of digital electronic systems design to these new design disciplines.Gregory Peterson and Darrell Teegarden join best-selling author Peter Ashenden in teaching designers how to use VHDL-AMS to model these complex systems. This comprehensive tutorial and reference provides detailed descriptions of both the syntax and semantics of the language and of successful modeling techniques. It assumes no previous knowledge of VHDL, but instead teaches VHDL and VHDL-AMS in an integrated fashion, just as it would be used by designers of these complex, integrated systems. - Explores the design of an electric-powered, unmanned aerial vehicle system (UAV) in five separate case studies to illustrate mixed-signal, mixed-technology, power systems, communication systems, and full system modeling.
Download or read book Methodology for the Modeling and Simulation of Microsystems written by Bartlomiej F. Romanowicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, technologies for microsystems fabrication have made considerable progress. This has made possible a large variety of new commercial devices ranging, for example, from integrated pressure and acceleration microsensors to active micromirror arrays for image projection. In the near future, there will be a number of new devices, which will be commercialized in many application areas. The field of microsystems is characterized by its wide diversity, which requires a multidisciplinary approach for design and processes as well as in application areas. Although there is a common technological background derived from integrated circuits, it is clear that microsystems will require additional application-specific technologies. Since most microsystem technologies are based on batch processing and dedicated to mass production, prototyping is likely to be an expensive and time-consuming step. It is recognized that standardization of the processes as well as of the design tools will definitely help reduce the entry cost of microsystems. This creates a very challenging situation for the design, modeling and simulation of microsystems. Methodology for the Modeling and Simulation of Microsystems is the first book to give an overview of the problems associated with modeling and simulation of microsystems. It introduces a new methodology, which is supported by several examples. It should provide a useful starting point for both scientists and engineers seeking background information for efficient design of microsystems.
Download or read book Automated Technology for Verification and Analysis written by Zhiming Liu and published by Springer. This book was released on 2009-10-13 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 7th International Symposium on Automated Technology for Verification and Analysis, ATVA 2009, held in Macao, China, in October 2009. The 23 regular papers and 3 took papers presented together with 3 invited talks, were carefully reviewed and selected from 74 research papers and 10 tool papers submissions. The papers are organized in topical sections on state space reduction, tools, probabilistic systems, medley, temporal logic, abstraction and refinement, and fault tolerant systems.
Download or read book Computational Intelligence in Analog and Mixed Signal AMS and Radio Frequency RF Circuit Design written by Mourad Fakhfakh and published by Springer. This book was released on 2015-07-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the application of recent advances in computational intelligence – algorithms, design methodologies, and synthesis techniques – to the design of integrated circuits and systems. It highlights new biasing and sizing approaches and optimization techniques and their application to the design of high-performance digital, VLSI, radio-frequency, and mixed-signal circuits and systems. This first of two related volumes addresses the design of analog and mixed-signal (AMS) and radio-frequency (RF) circuits, with 17 chapters grouped into parts on analog and mixed-signal applications, and radio-frequency design. It will be of interest to practitioners and researchers in computer science and electronics engineering engaged with the design of electronic circuits.
Download or read book Analog VHDL written by Andrzej T. Rosinski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog VHDL brings together in one place important contributions and up-to-date research results in this fast moving area. Analog VHDL serves as an excellent reference, providing insight into some of the most challenging research issues in the field.
Download or read book Mechatronic Systems Sensors and Actuators written by Robert H. Bishop and published by CRC Press. This book was released on 2017-07-28 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the key elements of physical systems modeling, sensors and actuators, signals and systems, computers and logic systems, and software and data acquisition. It describes mathematical models of the mechanical, electrical, and fluid subsystems that comprise many mechatronic systems.
Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.
Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.
Download or read book The Dynamics of Vehicles on Roads and on Tracks written by Robert Frohling and published by CRC Press. This book was released on 2021-06-30 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings provide an authoritative source of information in the field of suspension design, vehicle-infrastructure interaction, mechatronics and vehicle control systems for road as well as rail vehicles. The research presented includes modelling and simulation.
Download or read book Debugging at the Electronic System Level written by Frank Rogin and published by Springer Science & Business Media. This book was released on 2010-06-17 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debugging becomes more and more the bottleneck to chip design productivity, especially while developing modern complex integrated circuits and systems at the Electronic System Level (ESL). Today, debugging is still an unsystematic and lengthy process. Here, a simple reporting of a failure is not enough, anymore. Rather, it becomes more and more important not only to find many errors early during development but also to provide efficient methods for their isolation. In Debugging at the Electronic System Level the state-of-the-art of modeling and verification of ESL designs is reviewed. There, a particular focus is taken onto SystemC. Then, a reasoning hierarchy is introduced. The hierarchy combines well-known debugging techniques with whole new techniques to improve the verification efficiency at ESL. The proposed systematic debugging approach is supported amongst others by static code analysis, debug patterns, dynamic program slicing, design visualization, property generation, and automatic failure isolation. All techniques were empirically evaluated using real-world industrial designs. Summarized, the introduced approach enables a systematic search for errors in ESL designs. Here, the debugging techniques improve and accelerate error detection, observation, and isolation as well as design understanding.
Download or read book Advances in Hardware Design and Verification written by Hon Li and published by Springer. This book was released on 2016-01-09 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: CHARM '97 is the ninth in a series of working conferences devoted to the development and use of formal techniques in digital hardware design and verification. This series is held in collaboration with IFIP WG 10.5. Previous meetings were held in Europe every other year.
Download or read book Production Systems and Supply Chain Management in Emerging Countries Best Practices written by Gonzalo Mejía and published by Springer Science & Business Media. This book was released on 2012-05-31 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents several highly selected cases in emerging countries where the production-logistics systems have been optimized or improved with the support of mathematical models. The book contains a selection of papers from the 5th International Conference on Production Research (ICPR) Americas 2010 held on July 21-23 in Bogotá, Colombia. The main topic of the conference was “Technologies in Logistics and Manufacturing for Small and Medium Enterprises” which is perfectly aligned with the realities of emerging countries. The book presents methodologies and case studies related to a wide variety of production/logistics systems such as diary production, auto parts, steel and iron production, and financial services. It is focused but not limited to Small/Medium Enterprises.
Download or read book System Specification and Design Languages written by Tom J. Kaźmierski and published by Springer Science & Business Media. This book was released on 2011-12-02 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a selection of the best papers from the thirteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in Southampton, UK in September 2010. FDL is a well established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modelling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.
Download or read book New Developments and Applications in Sensing Technology written by Subhas Chandra Mukhopadhyay and published by Springer Science & Business Media. This book was released on 2011-01-22 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has focussed on different aspects of smart sensors and sensing technology, i.e. intelligent measurement, information processing, adaptability, recalibration, data fusion, validation, high reliability and integration of novel and high performance sensors in the areas of magnetic, ultrasonic, vision and image sensing, wireless sensors and network, microfluidic, tactile, gyro, flow, surface acoustic wave, humidity and ultra-wide band. While future interest in this field is ensured by the constant supply of emerging modalities, techniques and engineering solutions, as well as an increasing need from aging structures, many of the basic concepts and strategies have already matured and now offer opportunities to build upon. The book has primarily been focussed for postgraduate and research students working on different aspects of design and developments of smart sensors and sensing technology.
Download or read book Electronic Design Automation for IC System Design Verification and Testing written by Luciano Lavagno and published by CRC Press. This book was released on 2017-12-19 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level models Offering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book Models Methods and Tools for Complex Chip Design written by Jan Haase and published by Springer Science & Business Media. This book was released on 2013-09-18 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a selection of the best papers from the fifteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2012 at Vienna University of Technology, Vienna, Austria. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.
Download or read book Proceedings of the Midwest Symposium on Circuits and Systems written by and published by . This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
