Download or read book A Method for Measuring Soil Properties of Very Soft Clay written by S. L. Lee and published by . This book was released on 1987 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book The Measurement of Soil Properties In situ written by James Kenneth Mitchell and published by . This book was released on 1978 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Delft Sand Clay and Rock Cutting Model written by S.A. Miedema and published by IOS Press. This book was released on 2014-10-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock. Small blade angles and large blade angles are discussed for each soil type, and for each case considered the equations/model for cutting forces, power and specific energy are given. With models verified by laboratory research, principally from the Delft University of Technology, and data from other recognized sources, this book will prove an invaluable reference for anybody whose work involves major excavations of any kind.
Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Ninth Southeast Asian Geotechnical Conference written by and published by . This book was released on 1987 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Physical Measurement and Interpretation for Land Evaluation written by Keppel Coughlan and published by CSIRO PUBLISHING. This book was released on 2002-11-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil physical measurements are essential for solving many natural resource management problems. This operational laboratory and field handbook provides, for the first time, a standard set of methods that are cost-effective and well suited to land resource survey. It provides: *practical guidelines on the soil physical measurements across a range of soils, climates and land uses; *straightforward descriptions for each method (including common pitfalls) that can be applied by people with a rudimentary knowledge of soil physics, and *guidelines on the interpretation of results and integration with land resource assessment. Soil Physical Measurement And Interpretation for Land Evaluation begins with an introduction to land evaluation and then outlines procedures for field sampling. Twenty detailed chapters cover pore space relations, water retention, hydraulic conductivity, water table depth, dispersion, aggregation, particle size, shrinkage, Atterburg limits and strength. The book includes procedures for estimating soil physical properties from more readily available data and shows how soil physical data can be integrated into land planning and management decisions.
Download or read book A Non Resonance Method for Measuring Dynamic Soil Properties written by GJ. Rix and published by . This book was released on 2005 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: A non-resonance (NR) test method is introduced to determine dynamic soil properties at low strain amplitudes over a broad frequency range using a conventional resonant column/torsional shear (RC/TS) apparatus. The theoretical background of the NR method is presented and it is shown that the shear modulus and material damping ratio can be obtained from frequency response measurements between the applied torque and resulting rotational displacement of the specimen. By properly accounting for inertia effects, the NR method allows measurements at frequencies (e.g., 2-30 Hz) that fill the gap between conventional RC and TS tests. Experimental results are presented for aluminum alloy, polymethyl methacrylate (PMMA), and soil specimens over the frequency range of 0.01-30 Hz. Values for aluminum alloy and PMMA, used as calibration materials, obtained with the NR method agree well with reference values from the literature and help validate the approach. Tests on two soil specimens indicate that the NR method permits continuous measurements of shear modulus and material damping ratio of soils over a broad frequency range, which has the potential to yield improved understanding of viscoelastic soil behavior and provide dynamic soil properties over a range of frequencies appropriate for a variety of natural and man-made vibration sources.
Download or read book Soil Properties written by Cheng Liu and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Amrican Society for Testing and Materials procedures, the most commonly used methods in civil engineering practice, this laboratory manual has been expanded and updated to include current information. The classification of soils for engineering purposes is covered.
Download or read book Soil Quality Test Kit Guide written by and published by . This book was released on 1998 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical and Geophysical Site Characterization 4 written by Roberto Quental Coutinho and published by CRC Press. This book was released on 2012-09-06 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1983 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Geotechnical Engineering from Harvard to New Delhi 1936 1994 written by A.S. Balasubramaniam and published by CRC Press. This book was released on 2021-06-30 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the developments that have taken place in the field of geotechnical engineering since the first international conference on Soil Mechanics and Foundation Engineering was held in Harvard University in 1936 until the January 1994 conference in New Delhi, India.
Download or read book Characterisation and Engineering Properties of Natural Soils written by T. S. Tan and published by CRC Press. This book was released on 2003 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume of a specialty 2-volume work contains 34 papers pertaining to the natural behaviour of diverse geomaterials found in different parts of the world. Each paper is organized along the outline: location and distribution, engineering geology, composition, state and index properties, structure, engineering properties, quality / reliability of data with reference to methods of sampling and testing, and relation to engineering problems. This extensive body of collated knowledge is integrated by three overview papers covering engineering geology, mechanical behaviour and engineering implications. Topics: Overview papers; Marine clays; Eastuarine Clays; Lacustrine clays; Stiff clays; Sands and other cohesionless soils; Residual and other tropical Soils; Weak rock.
Download or read book Irrigation and Drainage Engineering written by Peter Waller and published by Springer. This book was released on 2015-11-18 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook focuses specifically on the combined topics of irrigation and drainage engineering. It emphasizes both basic concepts and practical applications of the latest technologies available. The design of irrigation, pumping, and drainage systems using Excel and Visual Basic for Applications programs are explained for both graduate and undergraduate students and practicing engineers. The book emphasizes environmental protection, economics, and engineering design processes. It includes detailed chapters on irrigation economics, soils, reference evapotranspiration, crop evapotranspiration, pipe flow, pumps, open-channel flow, groundwater, center pivots, turf and landscape, drip, orchards, wheel lines, hand lines, surfaces, greenhouse hydroponics, soil water movement, drainage systems design, drainage and wetlands contaminant fate and transport. It contains summaries, homework problems, and color photos. The book draws from the fields of fluid mechanics, soil physics, hydrology, soil chemistry, economics, and plant sciences to present a broad interdisciplinary view of the fundamental concepts in irrigation and drainage systems design.
Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2007-05-31 with total page 1756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
