Download or read book A Medical Instrument for Body surface Mapping UML Model Hardware Design and VHDL Simulation written by Venkatasateesh Gudla and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Current clinical body surface mapping (BSM) systems need automated, reliable data acquisition systems to quickly and easily obtain accurate potentials from many locations on the body-surface. Design of a computerized electrode array (CEA) for this purpose includes both hardware and software components. The CEA is a real-time, hardware intensive embedded system. Modeling of this hardware-software system with a well-established modeling language for software, Unified Modeling Language (UML), was attempted. UML diagrams help understand operation and design of the system being modeled, including hardware-software separation. A proposal for the hardware design of the node is made. The proposed CEA architecture consists of thirteen nodes, where each node services sixteen electrodes and all nodes communicate using ARCNET protocol. Exploration and comparison of design options is described in detail. A Bus Functional Model (BFM) in VHDL was created for the Microcontroller-ARCNET interface chip used in the node design. The BFM was integrated with other VHDL models to simulate node design. Board-level testing was done to check for timing violations and bus contentions. No damaging bus contentions or timing violations were found. The design of the node is complete and tested successfully in software. The proposed CEA should help allow quick and accurate measurement of BSMs"--Abstract, page iii

Download or read book Digital Integrated Circuit Design written by Hubert Kaeslin and published by Cambridge University Press. This book was released on 2008-04-28 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical, tool-independent guide to designing digital circuits takes a unique, top-down approach, reflecting the nature of the design process in industry. Starting with architecture design, the book comprehensively explains the why and how of digital circuit design, using the physics designers need to know, and no more.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Practical Statecharts in C C written by Miro Samek and published by CRC Press. This book was released on 2002-01-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Downright revolutionary... the title is a major understatement... 'Quantum Programming' may ultimately change the way embedded software is designed.' -- Michael Barr, Editor-in-Chief, Embedded Systems Programming magazine (Click here

Download or read book The Unified Modeling Language User Guide written by Grady Booch and published by Addison-Wesley Professional. This book was released on 2017-07-12 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: For nearly ten years, the Unified Modeling Language (UML) has been the industry standard for visualizing, specifying, constructing, and documenting the artifacts of a software-intensive system. As the de facto standard modeling language, the UML facilitates communication and reduces confusion among project stakeholders. The recent standardization of UML 2.0 has further extended the language's scope and viability. Its inherent expressiveness allows users to model everything from enterprise information systems and distributed Web-based applications to real-time embedded systems. In this eagerly anticipated revision of the best-selling and definitive guide to the use of the UML, the creators of the language provide a tutorial to its core aspects in a two-color format designed to facilitate learning. Starting with an overview of the UML, the book explains the language gradually by introducing a few concepts and notations in each chapter. It also illustrates the application of the UML to complex modeling problems across a variety of application domains. The in-depth coverage and example-driven approach that made the first edition of The Unified Modeling Language User Guide an indispensable resource remain unchanged. However, content has been thoroughly updated to reflect changes to notation and usage required by UML 2.0. Highlights include: A new chapter on components and internal structure, including significant new capabilities for building encapsulated designs New details and updated coverage of provided and required interfaces, collaborations, and UML profiles Additions and changes to discussions of sequence diagrams, activity diagrams, and more Coverage of many other changes introduced by the UML 2.0 specification With this essential guide, you will quickly get up to speed on the latest features of the industry standard modeling language and be able to apply them to your next software project.

Download or read book Proceedings of EECE 2020 written by Nikolai Vatin and published by Springer Nature. This book was released on 2021-03-26 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of energy, environmental and construction engineering, as presented by international researchers and engineers at the International Scientific Conference Energy, Environmental and Construction Engineering, held in St. Petersburg, Russia on November 19-20, 2020. It covers highly diverse topics, including BIM; bridges, roads and tunnels; building materials; energy efficient and green buildings; structural mechanics; fluid mechanics; measuring technologies; environmental management; power consumption management; renewable energy; smart cities; and waste management. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Download or read book Field Programmable Logic and Applications written by Patrick Lysaght and published by Springer Science & Business Media. This book was released on 1999-08-20 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the 9th International Workshop on Field ProgrammableLogic and Applications (FPL’99), hosted by the University of Strathclyde in Glasgow, Scotland, August 30 – September 1, 1999. FPL’99 is the ninth in the series of annual FPL workshops. The FPL’99 programme committee has been fortunate to have received a large number of high-quality papers addressing a wide range of topics. From these, 33 papers have been selected for presentation at the workshop and a further 32 papers have been accepted for the poster sessions. A total of 65 papers from 20 countries are included in this volume. FPL is a subject area that attracts researchers from both electronic engine- ing and computer science. Whether we are engaged in research into soft ha- ware or hard software seems to be primarily a question of perspective. What is unquestionable is that the interaction of groups of researchers from di?erent backgrounds results in stimulating and productive research. As we prepare for the new millennium, the premier European forum for - searchers in ?eld programmable logic remains the FPL workshop. Next year the FPL series of workshopswill celebrate its tenth anniversary.The contribution of so many overseas researchers has been a particularly attractive feature of these events, giving them a truly international perspective, while the informal and convivial atmosphere that pervades the workshops have been their hallmark. We look forward to preserving these features in the future while continuing to expand the size and quality of the events.

Download or read book IEEE Standard Test Access Port and Boundary scan Architecture written by IEEE Standards Board and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Systems Design with FPGAs and CPLDs written by Ian Grout and published by Elsevier. This book was released on 2011-04-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Systems Design with FPGAs and CPLDs explains how to design and develop digital electronic systems using programmable logic devices (PLDs). Totally practical in nature, the book features numerous (quantify when known) case study designs using a variety of Field Programmable Gate Array (FPGA) and Complex Programmable Logic Devices (CPLD), for a range of applications from control and instrumentation to semiconductor automatic test equipment.Key features include:* Case studies that provide a walk through of the design process, highlighting the trade-offs involved.* Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.With this book engineers will be able to:* Use PLD technology to develop digital and mixed signal electronic systems* Develop PLD based designs using both schematic capture and VHDL synthesis techniques* Interface a PLD to digital and mixed-signal systems* Undertake complete design exercises from design concept through to the build and test of PLD based electronic hardwareThis book will be ideal for electronic and computer engineering students taking a practical or Lab based course on digital systems development using PLDs and for engineers in industry looking for concrete advice on developing a digital system using a FPGA or CPLD as its core. Case studies that provide a walk through of the design process, highlighting the trade-offs involved. Discussion of real world issues such as choice of device, pin-out, power supply, power supply decoupling, signal integrity- for embedding FPGAs within a PCB based design.

Download or read book Embedded Software for SoC written by Ahmed Amine Jerraya and published by Springer Science & Business Media. This book was released on 2003-09-30 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title covers all software-related aspects of SoC design, from embedded and application-domain specific operating systems to system architecture for future SoC. It will give embedded software designers invaluable insights into the constraints imposed by the use of embedded software in an SoC context.

Download or read book System on Chip Methodologies Design Languages written by Peter J. Ashenden and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-on-Chip Methodologies & Design Languages brings together a selection of the best papers from three international electronic design language conferences in 2000. The conferences are the Hardware Description Language Conference and Exhibition (HDLCon), held in the Silicon Valley area of USA; the Forum on Design Languages (FDL), held in Europe; and the Asia Pacific Chip Design Language (APChDL) Conference. The papers cover a range of topics, including design methods, specification and modeling languages, tool issues, formal verification, simulation and synthesis. The results presented in these papers will help researchers and practicing engineers keep abreast of developments in this rapidly evolving field.

Download or read book Nasa Systems Engineering Handbook Nasa Sp 2016 6105 Rev2 written by National Aeronautics and Space Administration and published by Createspace Independent Publishing Platform. This book was released on 2017-11-03 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook, "NASA Systems Engineering Handbook," is intended to provide general guidance and information on systems engineering that will be useful to the NASA community. It provides a generic description of Systems Engineering (SE) as it should be applied throughout NASA. A goal of the handbook is to increase awareness and consis¬tency across the Agency and advance the practice of SE. This handbook provides perspectives relevant to NASA and data particular to NASA. This handbook describes systems engineering best practices that should be incorporated in the development and implementation of large and small NASA programs and projects. The engineering of NASA systems requires a systematic and disciplined set of processes that are applied recursively and iteratively for the design, development, operation, maintenance, and closeout of systems throughout the life cycle of the programs and projects. The scope of this handbook includes systems engineering functions regardless of whether they are performed by a manager or an engineer, in-house or by a contractor.

Download or read book FPGA based Implementation of Signal Processing Systems written by Roger Woods and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important working resource for engineers and researchers involved in the design, development, and implementation of signal processing systems The last decade has seen a rapid expansion of the use of field programmable gate arrays (FPGAs) for a wide range of applications beyond traditional digital signal processing (DSP) systems. Written by a team of experts working at the leading edge of FPGA research and development, this second edition of FPGA-based Implementation of Signal Processing Systems has been extensively updated and revised to reflect the latest iterations of FPGA theory, applications, and technology. Written from a system-level perspective, it features expert discussions of contemporary methods and tools used in the design, optimization and implementation of DSP systems using programmable FPGA hardware. And it provides a wealth of practical insights—along with illustrative case studies and timely real-world examples—of critical concern to engineers working in the design and development of DSP systems for radio, telecommunications, audio-visual, and security applications, as well as bioinformatics, Big Data applications, and more. Inside you will find up-to-date coverage of: FPGA solutions for Big Data Applications, especially as they apply to huge data sets The use of ARM processors in FPGAs and the transfer of FPGAs towards heterogeneous computing platforms The evolution of High Level Synthesis tools—including new sections on Xilinx's HLS Vivado tool flow and Altera's OpenCL approach Developments in Graphical Processing Units (GPUs), which are rapidly replacing more traditional DSP systems FPGA-based Implementation of Signal Processing Systems, 2nd Edition is an indispensable guide for engineers and researchers involved in the design and development of both traditional and cutting-edge data and signal processing systems. Senior-level electrical and computer engineering graduates studying signal processing or digital signal processing also will find this volume of great interest.

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book INCOSE Systems Engineering Handbook written by INCOSE and published by John Wiley & Sons. This book was released on 2015-06-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed and thorough reference on the discipline and practice of systems engineering The objective of the International Council on Systems Engineering (INCOSE) Systems Engineering Handbook is to describe key process activities performed by systems engineers and other engineering professionals throughout the life cycle of a system. The book covers a wide range of fundamental system concepts that broaden the thinking of the systems engineering practitioner, such as system thinking, system science, life cycle management, specialty engineering, system of systems, and agile and iterative methods. This book also defines the discipline and practice of systems engineering for students and practicing professionals alike, providing an authoritative reference that is acknowledged worldwide. The latest edition of the INCOSE Systems Engineering Handbook: Is consistent with ISO/IEC/IEEE 15288:2015 Systems and software engineering—System life cycle processes and the Guide to the Systems Engineering Body of Knowledge (SEBoK) Has been updated to include the latest concepts of the INCOSE working groups Is the body of knowledge for the INCOSE Certification Process This book is ideal for any engineering professional who has an interest in or needs to apply systems engineering practices. This includes the experienced systems engineer who needs a convenient reference, a product engineer or engineer in another discipline who needs to perform systems engineering, a new systems engineer, or anyone interested in learning more about systems engineering.

Download or read book Reconfigurable Computing written by Joao Cardoso and published by Springer Science & Business Media. This book was released on 2011-08-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of modern embedded systems increases, it becomes less practical to design monolithic processing platforms. As a result, reconfigurable computing is being adopted widely for more flexible design. Reconfigurable Computers offer the spatial parallelism and fine-grained customizability of application-specific circuits with the postfabrication programmability of software. To make the most of this unique combination of performance and flexibility, designers need to be aware of both hardware and software issues. FPGA users must think not only about the gates needed to perform a computation but also about the software flow that supports the design process. The goal of this book is to help designers become comfortable with these issues, and thus be able to exploit the vast opportunities possible with reconfigurable logic.

Download or read book Proceedings of International Conference on Advances in Computing written by Aswatha Kumar M. and published by Springer Science & Business Media. This book was released on 2012-09-03 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first International Conference on Advances in Computing (ICAdC-2012). The scope of the conference includes all the areas of New Theoretical Computer Science, Systems and Software, and Intelligent systems. Conference Proceedings is a culmination of research results, papers and the theory related to all the three major areas of computing mentioned above. Helps budding researchers, graduates in the areas of Computer Science, Information Science, Electronics, Telecommunication, Instrumentation, Networking to take forward their research work based on the reviewed results in the paper by mutual interaction through e-mail contacts in the proceedings.