Download or read book A Mathematical Theory of Design Foundations Algorithms and Applications written by D. Braha and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal Design Theory (PDT) is a mathematical theory of design. The main goal of PDT is to develop a domain independent core model of the design process. The book focuses the reader's attention on the process by which ideas originate and are developed into workable products. In developing PDT, we have been striving toward what has been expressed by the distinguished scholar Simon (1969): that "the science of design is possible and some day we will be able to talk in terms of well-established theories and practices. " The book is divided into five interrelated parts. The conceptual approach is presented first (Part I); followed by the theoretical foundations of PDT (Part II), and from which the algorithmic and pragmatic implications are deduced (Part III). Finally, detailed case-studies illustrate the theory and the methods of the design process (Part IV), and additional practical considerations are evaluated (Part V). The generic nature of the concepts, theory and methods are validated by examples from a variety of disciplines. FDT explores issues such as: algebraic representation of design artifacts, idealized design process cycle, and computational analysis and measurement of design process complexity and quality. FDT's axioms convey the assumptions of the theory about the nature of artifacts, and potential modifications of the artifacts in achieving desired goals or functionality. By being able to state these axioms explicitly, it is possible to derive theorems and corollaries, as well as to develop specific analytical and constructive methodologies.

Download or read book Filter Design With Time Domain Mask Constraints Theory and Applications written by Ba-Ngu Vo and published by Springer Science & Business Media. This book was released on 2001-10-31 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimum envelope-constrained filter design is concerned with time-domain synthesis of a filter such that its response to a specific input signal stays within prescribed upper and lower bounds, while minimizing the impact of input noise on the filter output or the impact of the shaped signal on other systems depending on the application. In many practical applications, such as in TV channel equalization, digital transmission, and pulse compression applied to radar, sonar and detection, the soft least square approach, which attempts to match the output waveform with a specific desired pulse, is not the most suitable one. Instead, it becomes necessary to ensure that the response stays within the hard envelope constraints defined by a set of continuous inequality constraints. The main advantage of using the hard envelope-constrained filter formulation is that it admits a whole set of allowable outputs. From this set one can then choose the one which results in the minimization of a cost function appropriate to the application at hand. The signal shaping problems so formulated are semi-infinite optimization problems. This monograph presents in a unified manner results that have been generated over the past several years and are scattered in the research literature. The material covered in the monograph includes problem formulation, numerical optimization algorithms, filter robustness issues and practical examples of the application of envelope constrained filter design. Audience: Postgraduate students, researchers in optimization and telecommunications engineering, and applied mathematicians.

Download or read book Multicriteria Design written by R.B. Statnikov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the PSI method. Its appearance was a reaction to the unsatisfactory situation in applications of optimization methods in engineering. After comprehensive testing of the PSI method in various fields of machine engineering it has become obvious that this method substantially surpasses all other available techniques in many respects. It has now become known that the PSI method is successfully used not only in machine design, at which it was initially aimed, but also in polymer chemistry, pharmacy, nuclear energy, biology, geophysics, and many other fields of human activity. To all appearances this method has become so popular for its potential of taking into account the specific features of applied optimization better than other methods, being, at the same time, comparatively simple and friendly, and because, unlike traditional optimization methods which are intended only for searching for optimal solutions, the PSI method is also aimed at correctly formulating engineering optimization problems. One well-known aircraft designer once said, "To solve an optimization problem in engineering means, first of all, to be able to state this problem properly". In this sense the PSI method has no competitors. Although this method has been presented in Russia in numerous papers and books, Western readers have had the opportunity to familiarize themselves with this method only recently (Ozernoy 1988; Lieberman 1991; Stadler and Dauer 1992; Dyer, Fishburn, Steuer, Wallenius, and Zionts 1992; Steuer and Sun 1995, etc. ).

Download or read book Complementarity Applications Algorithms and Extensions written by Michael C. Ferris and published by Springer Science & Business Media. This book was released on 2001-02-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents state-of-the-art complementarity applications, algorithms, extensions and theory in the form of eighteen papers. These at the International Conference on Com invited papers were presented plementarity 99 (ICCP99) held in Madison, Wisconsin during June 9-12, 1999 with support from the National Science Foundation under Grant DMS-9970102. Complementarity is becoming more widely used in a variety of appli cation areas. In this volume, there are papers studying the impact of complementarity in such diverse fields as deregulation of electricity mar kets, engineering mechanics, optimal control and asset pricing. Further more, application of complementarity and optimization ideas to related problems in the burgeoning fields of machine learning and data mining are also covered in a series of three articles. In order to effectively process the complementarity problems that arise in such applications, various algorithmic, theoretical and computational extensions are covered in this volume. Nonsmooth analysis has an im portant role to play in this area as can be seen from articles using these tools to develop Newton and path following methods for constrained nonlinear systems and complementarity problems. Convergence issues are covered in the context of active set methods, global algorithms for pseudomonotone variational inequalities, successive convex relaxation and proximal point algorithms. Theoretical contributions to the connectedness of solution sets and constraint qualifications in the growing area of mathematical programs with equilibrium constraints are also presented. A relaxation approach is given for solving such problems. Finally, computational issues related to preprocessing mixed complementarity problems are addressed.

Download or read book Scheduling Control Based Theory and Polynomial Time Algorithms written by K. Kogan and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a first attempt to systematically collect, classify and solve various continuous-time scheduling problems. The classes of problems distinguish scheduling by the number of machines and products, production constraints and performance measures. Although such classes are usually considered to be a prerogative of only combinatorial scheduling literature, the scheduling methodology suggested in this book is based on two mathematical tools - optimal control and combinatorics. Generally considered as belonging to two totally different areas of research and application, these seemingly irreconcilable tools can be integrated in a unique solution approach with the advantages of both. This new approach provides the possibility of developing effective polynomial-time algorithms to solve the generic scheduling problems. This book is aimed at a student audience - final year undergraduates as well as master and Ph.D. students, primarily in Operations Research, Management, Industrial Engineering and Control Systems. Indeed, some of the material in the book has formed part of the content of undergraduate and graduate courses taught at the Industrial Engineering Department of Tel-Aviv University, the Logistics Department of Bar-Ilan University and the Technology Management Department of Rolon Center for Technological Education, Israel. The book is also useful for practicing engineers interested in planning, scheduling and optimization methods. Since the book addresses the theory and design of computer-based scheduling algorithms, applied mathematicians and computer software specialists engaged in developing scheduling software for industrial engineering and management problems will find that the methods developed here can be embedded very efficiently in large applications.

Download or read book Trends in Industrial and Applied Mathematics written by Abul Hasan Siddiqi and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important objective of the study of mathematics is to analyze and visualize phenomena of nature and real world problems for its proper understanding. Gradually, it is also becoming the language of modem financial instruments. To project some of these developments, the conference was planned under the joint auspices of the Indian Society of Industrial and Applied mathematics (ISlAM) and Guru Nanak Dev University (G. N. D. U. ), Amritsar, India. Dr. Pammy Manchanda, chairperson of Mathematics Department, G. N. D. U. , was appointed the organizing secretary and an organizing committee was constituted. The Conference was scheduled in World Mathematics Year 2000 but, due one reason or the other, it could be held during 22. -25. January 2001. How ever, keeping in view the suggestion of the International Mathematics union, we organized two symposia, Role of Mathematics in industrial development and vice-versa and How image of Mathematics can be improved in public. These two symposia aroused great interest among the participants and almost everyone participated in the deliberations. The discussion in these two themes could be summarized in the lengthy following lines: "Tradition of working in isolation is a barrier for interaction with the workers in the other fields of science and engineering, what to talk of non-academic areas, specially the private sector of finance and industry. Therefore, it is essential to build bridges within in stitutions and between institutions.

Download or read book Mathematical Modeling in Economics Ecology and the Environment written by N.V. Hritonenko and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of interrelation between human economics and natural environment include scientific, technical, economic, demographic, social, political and other aspects that are studied by scientists of many specialities. One of the important aspects in scientific study of environmental and ecological problems is the development of mathematical and computer tools for rational management of economics and environment. This book introduces a wide range of mathematical models in economics, ecology and environmental sciences to a general mathematical audience with no in-depth experience in this specific area. Areas covered are: controlled economic growth and technological development, world dynamics, environmental impact, resource extraction, air and water pollution propagation, ecological population dynamics and exploitation. A variety of known models are considered, from classical ones (Cobb Douglass production function, Leontief input-output analysis, Solow models of economic dynamics, Verhulst-Pearl and Lotka-Volterra models of population dynamics, and others) to the models of world dynamics and the models of water contamination propagation used after Chemobyl nuclear catastrophe. Special attention is given to modelling of hierarchical regional economic-ecological interaction and technological change in the context of environmental impact. Xlll XIV Construction of Mathematical Models ...

Download or read book Topics in Industrial Mathematics written by H Neunzert and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Mathematics is a relatively recent discipline. It is concerned primarily with transforming technical, organizational and economic problems posed by indus try into mathematical problems; "solving" these problems byapproximative methods of analytical and/or numerical nature; and finally reinterpreting the results in terms of the original problems. In short, industrial mathematics is modelling and scientific computing of industrial problems. Industrial mathematicians are bridge-builders: they build bridges from the field of mathematics to the practical world; to do that they need to know about both sides, the problems from the companies and ideas and methods from mathematics. As mathematicians, they have to be generalists. If you enter the world of indus try, you never know which kind of problems you will encounter, and which kind of mathematical concepts and methods you will need to solve them. Hence, to be a good "industrial mathematician" you need to know a good deal of mathematics as well as ideas already common in engineering and modern mathematics with tremen dous potential for application. Mathematical concepts like wavelets, pseudorandom numbers, inverse problems, multigrid etc., introduced during the last 20 years have recently started entering the world of real applications. Industrial mathematics consists of modelling, discretization, analysis and visu alization. To make a good model, to transform the industrial problem into a math ematical one such that you can trust the prediction of the model is no easy task.

Download or read book Internationalization Technological Change and the Theory of the Firm written by Nicola De Liso and published by Routledge. This book was released on 2010-09-13 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on three main areas, each of which is central to economic theorising: firms’ organisation and behaviour, technological change and the process of globalisation. What this collection provides is a broad view of the three topics by concentrating on different aspects of each of them, and utilising different methods of investigation.

Download or read book Elements for a Theory of Decision in Uncertainty written by Jaime Gil-Aluja and published by Springer Science & Business Media. This book was released on 1999-11-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tools for making decisions in an environment of uncertainty. In Chapter 1 the author explains the most important aspects of the concept of relation. From this start arise the other three concepts that cover practically all processes from which decisions stem. These three concepts are: attribution from which the concept of assignment arises; and grouping, which includes the concept of an original function. The techniques presented, as well as the models and algorithms developed, constitute an invaluable aid for those who must make decisions. Audience: Researchers and graduate students interested in mathematics applied to economics and management.

Download or read book Managing in Uncertainty Theory and Practice written by Constantin Zopounidis and published by Springer Science & Business Media. This book was released on 1998-08-31 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a new point of view on the subject of the management of uncertainty. It covers a wide variety of both theoretical and practical issues involving the analysis and management of uncertainty in the fields of finance, management and marketing. Audience: Researchers and professionals from operations research, management science and economics.

Download or read book Case Based Design written by Yuri Avramenko and published by Springer Science & Business Media. This book was released on 2008-01-21 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a highly authoritative and systematic manner, this book offers an in-depth treatment of the essence of the case–based reasoning strategy and case-based design dwelling upon the algorithmic facet of the paradigm. It provides an excellent applied research framework by showing how this development can be effectively utilized in the real word complicated environment of process engineering, a pursuit that is rarely reported in the literature in such a comprehensive manner.

Download or read book An Anthology of Theories and Models of Design written by Amaresh Chakrabarti and published by Springer Science & Business Media. This book was released on 2014-02-13 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: While investigations into both theories and models has remained a major strand of engineering design research, current literature sorely lacks a reference book that provides a comprehensive and up-to-date anthology of theories and models, and their philosophical and empirical underpinnings; An Anthology of Theories and Models of Design fills this gap. The text collects the expert views of an international authorship, covering: · significant theories in engineering design, including CK theory, domain theory, and the theory of technical systems; · current models of design, from a function behavior structure model to an integrated model; · important empirical research findings from studies into design; and · philosophical underpinnings of design itself. For educators and researchers in engineering design, An Anthology of Theories and Models of Design gives access to in-depth coverage of theoretical and empirical developments in this area; for practitioners, the book will provide exposure to theoretical and empirical foundations to methods and tools that are currently practiced as well as those in the process of development.

Download or read book Intelligent Manufacturing Systems 2003 written by Gérard Morel and published by Elsevier. This book was released on 2003 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the findings of experts and practitioners from the major soft-computing themes Provides an overview of the theory and applications of IMS systems The Area of Intelligence in manufacturing has generated a considerable amount of interest occasionally verging on controversy, both in the research community and in the industrial sector. This proceedings looks at the broad manufacturing domain dealing with both technical and organizational issues, intelligent control is only part, albeit important, of optimal integration and control of intelligent techniques. The importance of creating a synergy of efforts aiming at efficient employment of intelligence in global technological development for manufacturing was recognized by the international IMS (intelligent manufacturing Systems) Initiative and is discussed in this proceedings volume.

Download or read book Aspects of Semidefinite Programming written by E. de Klerk and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semidefinite programming has been described as linear programming for the year 2000. It is an exciting new branch of mathematical programming, due to important applications in control theory, combinatorial optimization and other fields. Moreover, the successful interior point algorithms for linear programming can be extended to semidefinite programming. In this monograph the basic theory of interior point algorithms is explained. This includes the latest results on the properties of the central path as well as the analysis of the most important classes of algorithms. Several "classic" applications of semidefinite programming are also described in detail. These include the Lovász theta function and the MAX-CUT approximation algorithm by Goemans and Williamson. Audience: Researchers or graduate students in optimization or related fields, who wish to learn more about the theory and applications of semidefinite programming.

Download or read book Models for Parallel and Distributed Computation written by R. Correa and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel and distributed computation has been gaining a great lot of attention in the last decades. During this period, the advances attained in computing and communication technologies, and the reduction in the costs of those technolo gies, played a central role in the rapid growth of the interest in the use of parallel and distributed computation in a number of areas of engineering and sciences. Many actual applications have been successfully implemented in various plat forms varying from pure shared-memory to totally distributed models, passing through hybrid approaches such as distributed-shared memory architectures. Parallel and distributed computation differs from dassical sequential compu tation in some of the following major aspects: the number of processing units, independent local dock for each unit, the number of memory units, and the programming model. For representing this diversity, and depending on what level we are looking at the problem, researchers have proposed some models to abstract the main characteristics or parameters (physical components or logical mechanisms) of parallel computers. The problem of establishing a suitable model is to find a reasonable trade-off among simplicity, power of expression and universality. Then, be able to study and analyze more precisely the behavior of parallel applications.

Download or read book Multicriteria Decision Aid Classification Methods written by Michael Doumpos and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses a new approach to the classification problem following the decision support orientation of multicriteria decision aid. The book reviews the existing research on the development of classification methods, investigating the corresponding model development procedures, and providing a thorough analysis of their performance both in experimental situations and real-world problems from the field of finance. Audience: Researchers and professionals working in management science, decision analysis, operations research, financial/banking analysis, economics, statistics, computer science, as well as graduate students in management science and operations research.