Download or read book A Manual of Machine Drawing and Design written by David Allan Low and published by . This book was released on 1908 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Handbook of Machine Design written by Joseph Edward Shigley and published by McGraw-Hill Professional Publishing. This book was released on 1996 with total page 1672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest ideas in machine analysis and design have led to a major revision of the field's leading handbook. New chapters cover ergonomics, safety, and computer-aided design, with revised information on numerical methods, belt devices, statistics, standards, and codes and regulations. Key features include: *new material on ergonomics, safety, and computer-aided design; *practical reference data that helps machines designers solve common problems--with a minimum of theory. *current CAS/CAM applications, other machine computational aids, and robotic applications in machine design. This definitive machine design handbook for product designers, project engineers, design engineers, and manufacturing engineers covers every aspect of machine construction and operations. Voluminous and heavily illustrated, it discusses standards, codes and regulations; wear; solid materials, seals; flywheels; power screws; threaded fasteners; springs; lubrication; gaskets; coupling; belt drive; gears; shafting; vibration and control; linkage; and corrosion.
Download or read book Mechanical Design of Machine Elements and Machines written by Jack A. Collins and published by John Wiley & Sons. This book was released on 2009-10-19 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a failure prevention perspective, this book provides engineers with a balance between analysis and design. The new edition presents a more thorough treatment of stress analysis and fatigue. It integrates the use of computer tools to provide a more current view of the field. Photos or images are included next to descriptions of the types and uses of common materials. The book has been updated with the most comprehensive coverage of possible failure modes and how to design with each in mind. Engineers will also benefit from the consistent approach to problem solving that will help them apply the material on the job.
Download or read book Mechanical Design of Machine Components written by Ansel C. Ugural and published by Taylor & Francis. This book was released on 2018-09-03 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyze and Solve Real-World Machine Design Problems Using SI Units Mechanical Design of Machine Components, Second Edition: SI Version strikes a balance between method and theory, and fills a void in the world of design. Relevant to mechanical and related engineering curricula, the book is useful in college classes, and also serves as a reference for practicing engineers. This book combines the needed engineering mechanics concepts, analysis of various machine elements, design procedures, and the application of numerical and computational tools. It demonstrates the means by which loads are resisted in mechanical components, solves all examples and problems within the book using SI units, and helps readers gain valuable insight into the mechanics and design methods of machine components. The author presents structured, worked examples and problem sets that showcase analysis and design techniques, includes case studies that present different aspects of the same design or analysis problem, and links together a variety of topics in successive chapters. SI units are used exclusively in examples and problems, while some selected tables also show U.S. customary (USCS) units. This book also presumes knowledge of the mechanics of materials and material properties. New in the Second Edition: Presents a study of two entire real-life machines Includes Finite Element Analysis coverage supported by examples and case studies Provides MATLAB solutions of many problem samples and case studies included on the book’s website Offers access to additional information on selected topics that includes website addresses and open-ended web-based problems Class-tested and divided into three sections, this comprehensive book first focuses on the fundamentals and covers the basics of loading, stress, strain, materials, deflection, stiffness, and stability. This includes basic concepts in design and analysis, as well as definitions related to properties of engineering materials. Also discussed are detailed equilibrium and energy methods of analysis for determining stresses and deformations in variously loaded members. The second section deals with fracture mechanics, failure criteria, fatigue phenomena, and surface damage of components. The final section is dedicated to machine component design, briefly covering entire machines. The fundamentals are applied to specific elements such as shafts, bearings, gears, belts, chains, clutches, brakes, and springs.
Download or read book A Manual of MacHine Design written by Castle Frank and published by Hardpress Publishing. This book was released on 2013-01 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike some other reproductions of classic texts (1) We have not used OCR(Optical Character Recognition), as this leads to bad quality books with introduced typos. (2) In books where there are images such as portraits, maps, sketches etc We have endeavoured to keep the quality of these images, so they represent accurately the original artefact. Although occasionally there may be certain imperfections with these old texts, we feel they deserve to be made available for future generations to enjoy.
Download or read book A Manual of Machine Design and Strength of Materials written by Frank Castle and published by . This book was released on 1952 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shigley s Mechanical Engineering Design written by Richard Gordon Budynas and published by McGraw-Hill Higher Education. This book was released on 2020 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shigley's Mechanical Engineering Design is intended for students beginning the study of mechanical engineering design. Students will find that the text inherently directs them into familiarity with both the basics of design decisions and the standards of industrial components. It combines the straightforward focus on fundamentals that instructors have come to expect, with a modern emphasis on design and new applications. This edition maintains the well-designed approach that has made this book the standard in machine design for nearly 50 years.
Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book A Manual of Machine Design written by Frank Castle and published by . This book was released on 1919 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineering Design written by Joseph Edward Shigley and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Classic Edition of Shigley & Mischke, Mechanical Engineering Design 5/e provides readers the opportunity to use this well-respected version of the bestselling textbook in Machine Design. Originally published in 1989, MED 5/e provides a balanced overview of machine element design, and the background methods and mechanics principles needed to do proper analysis and design. Content-wise the book remains unchanged from the latest reprint of the original 5th edition. Instructors teaching a course and needing problem solutions can contact McGraw-Hill Account Management for a copy of the Instructor Solutions Manual.
Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.
Download or read book Machine Design An Integrated Approach 2 E written by Norton and published by Pearson Education India. This book was released on 2000-09 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Design written by Robert H. Creamer and published by . This book was released on 1984-01-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Design written by Ernest L. Wallace and published by . This book was released on 1918 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Jig and Fixture Design Manual written by Erik Karl Henriksen and published by Industrial Press Inc.. This book was released on 1973 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for the experienced engineer as well as the student, this comprehensive and easy-to-understand reference presents the fundamental principles for combining the components into successful fixtures. It includes metric conversion tables and appendices on transfer tolerances, measuring of tolerances, measuring of angles in radians, and the dimensioning of fixtures by stress analysis.
Download or read book Manual of Machine Design and Strength of Materials written by Frank Castle and published by . This book was released on 1961 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shigley s Mechanical Engineering Design written by Richard G. Budynas and published by Asia Higher Education Engineering/Computer Science Mechanical Engineering. This book was released on 2014-08-26 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for students beginning the study of mechanical engineering design, this book helps students find that the text inherently directs them into familiarity with both the basics of design decisions and the standards of industrial components.
