Download or read book A Low Temperature Co fired Ceramic LTCC Interposer Based Three dimensional Stacked Wire Bondless Power Module written by Atanu Dutta and published by . This book was released on 2017 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this dissertation research is to develop a low temperature co-fired ceramic (LTCC) interposer-based module-level 3-D wire bondless stacked power module. As part of the dissertation work, the 3-D wire bondless stack is designed, simulated, fabricated and characterized. The 3-D wire bondless stack is realized with two stand-alone power modules in a half-bridge configuration. Each stand-alone power module consists of two 1200 V 25 A silicon insulated-gate bipolar transistor (IGBT) devices in parallel and two 1200 V 20 A Schottky barrier diodes (SBD) in an antiparallel configuration. A novel interconnection scheme with conductive clamps and a spring loaded LTCC interposer is introduced to establish electrical connection between the stand-alone power modules to connect them in series to realize a half-bridge stack. Process development to fabricate the LTCC based 3-D stack is performed. In traditional power modules, wire bonds are used as a top side interconnections that introduce additional parasitic inductance in the current conduction path and prone to failure mechanism under high thermomechanical stresses. The loop inductance of the proposed 3-D half-bridge module exhibits 71% lower parasitic inductance compared to a wire bonded module. The 3-D stack exhibits better switching performance compared to the wire bonded counterpart. The measurement results for the 3-D stack shows 30% decrease in current overshoot at turn-on and 43% voltage overshoot at turn-off compared to the wire bonded module. Through measurements, it has been shown that the conducted noise reduces by 20 dB in the frequency range 20-30 MHz for the 3-D stack compared to the wire bonded counterpart. A simulation methodology using co-simulation techniques using ANSYS EM software tools is developed to predict EMI of a power module. Hardware verification of the proposed simulation methodology is performed to validate the co-simulation technique. The correlation coefficient between the measurement and simulation is found to be 0.73. It is shown that 53% of the variability in the simulation can be explained by the simulated result. Moreover, the simulated and measured amplitudes of the EMI spectrum closely match with each other with some variations due to round-off errors due to the FFT conversion.
Download or read book Multilayered Low Temperature Cofired Ceramics LTCC Technology written by Yoshihiko Imanaka and published by Springer Science & Business Media. This book was released on 2006-05-28 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book to concentrate solely on low temperature cofired ceramics, an attractive technology for electronic components and substrates that are compact, light, and offer high-speed and functionality for portable electronic devices.
Download or read book Low Temperature Co fired Ceramics for System in Package Applications at 122 GHz written by Bhutani, Akanksha and published by KIT Scientific Publishing. This book was released on 2019-10-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BST based low temperature co fired ceramic LTCC modules for microwave tunable components written by Tao Hu and published by . This book was released on 2004 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of Low Temperature Co fired Ceramic LTCC based Sensor and Micro fluidic Structures written by Hansu Birol and published by . This book was released on 2007 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Interconnect Technology written by and published by . This book was released on 2003 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Co fired Ceramic LTCC Substrate for High Temperature Microelectronics written by Devin Alexander Smarra and published by . This book was released on 2017 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in aerospace technologies demand new ways to package electronics for high temperature and harsh environments. One packaging method of interest in academia and industry is Low Temperature Co-fired Ceramic (LTCC). LTCC is a multi-layer design and packaging system that can embed passive components and thermal management structures within a substrate. This thesis compiles research done to evaluate LTCC as a high-performance electronic packaging technique by determining the performance of embedded passives and thermal management structures at temperatures from -55°C to 225°C. The passive structures and thermal management structures are evaluated using theoretical calculations, simulations, and measurements of fabricated devices.
Download or read book Localized Temperature Stability in Low Temperature Cofired Ceramics LTCC written by and published by . This book was released on 2012 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present invention is directed to low temperature cofired ceramic modules having localized temperature stability by incorporating temperature coefficient of resonant frequency compensating materials locally into a multilayer LTCC module. Chemical interactions can be minimized and physical compatibility between the compensating materials and the host LTCC dielectrics can be achieved. The invention enables embedded resonators with nearly temperature-independent resonance frequency.
Download or read book LTCC written by Reinhard Kulke and published by . This book was released on 2001 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Novel Low Temperature Co firing Ceramic LTCC Material for Telecommunication Devices written by Heli Jantunen and published by . This book was released on 2001 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Low Temperature Cofired Ceramic Manufacturing Techniques for a Magnetron Field Emission Cathode written by Daylon Michael Black and published by . This book was released on 2019 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Low Temperature Cofired Ceramic (LTCC) is a material system that is ideal for integrated microelectronic packaging technology, because of its rapid prototyping and easy integration of passive components such as resistors, capacitors, and conductors. LTCC's electrical properties makes it especially suitable for high frequency applications such as magnetrons. Recently, there has been an increased demand for greater power capacities which is resolved by phase locking multiple low power (inexpensive) magnetrons together to achieve the same power as one high power (expensive) magnetron. The Vacuum Electron Devices (VED) and Ceramic Micro Electrical Mechanical Systems (CMEMS) labs at Boise State University have designed a new field emission cathode for the L3 Technologies industrial magnetron that will precisely inject electrons into the system. This controllable electron injection, has been shown by simulation to decrease startup times, increase efficiency, and even allow for active phase control during oscillation. In this research, new LTCC manufacturing techniques were developed in order to fabricate the newly designed cathode. Two different cathode wrapping techniques were compared and the layer by group technique was faster, more easily aligned, and had a shorter learning curve. Two different via filling techniques were compared and the flat fill technique was slightly slower but, more repeatable and was less likely to cause electrical shorting. Two different facet plate manufacturing techniques were compared and the mill technique was more precise and extremely repeatable. Four different stands were compared and the square post stand had the best circularity and linearity measurements of the fired cathode. Finally, the spiral embedded stripline line was prototyped and an elementary version was assembled which matched simulations."--Boise State University ScholarWorks.
Download or read book The Development and Biocompatibility of Low Temperature Co fired Ceramic LTCC for Microfluidic and Biosensor Applications written by Jin Luo and published by . This book was released on 2014 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global and Localized Temperature Stability in Low Temperature Cofired Ceramic LTCC written by and published by . This book was released on 2013 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Establishing a Ti Cu Pt Au Thin Film On Low Temperature Co Fired Ceramic LTCC Technology for High Temperature Electronics written by and published by . This book was released on 2015 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Cofired Ceramics LTCC Bandpass Filter and Integrated Passives Design written by Joonhyung Chung and published by . This book was released on 2005 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vehicular Electric Power Systems written by Ali Emadi and published by CRC Press. This book was released on 2003-12-12 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicular Electric Power Systems: Land, Sea, Air, and Space Vehicles acquaints professionals with trends and challenges in the development of more electric vehicles (MEVs) using detailed examples and comprehensive discussions of advanced MEV power system architectures, characteristics, and dynamics. The authors focus on real-world applications and highlight issues related to system stability as well as challenges faced during and after implementation. Probes innovations in the development of more electric vehicles for improved maintenance, support, endurance, safety, and cost-efficiency in automotive, aerospace, and marine vehicle engineering Heralding a new wave of advances in power system technology, Vehicular Electric Power Systems discusses: Different automotive power systems including conventional automobiles, more electric cars, heavy-duty vehicles, and electric and hybrid electric vehicles Electric and hybrid electric propulsion systems and control strategies Aerospace power systems including conventional and advanced aircraft, spacecraft, and the international space station Sea and undersea vehicles The modeling, real-time state estimation, and stability assessment of vehicular power systems Applications of fuel cells in various land, sea, air, and space vehicles Modeling techniques for energy storage devices including batteries, fuel cells, photovoltaic cells, and ultracapacitors Advanced power electronic converters and electric motor drives for vehicular applications Guidelines for the proper design of DC and AC distribution architectures
Download or read book Reliability of Power Electronic Converter Systems written by Henry Shu-hung Chung and published by IET. This book was released on 2015-12-07 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aims of power electronic converter systems (PECS) are to control, convert, and condition electrical power flow from one form to another through the use of solid state electronics. This book outlines current research into the scientific modeling, experimentation, and remedial measures for advancing the reliability, availability, system robustness, and maintainability of PECS at different levels of complexity.
