Download or read book A Low power Impulse Radio Ultra wideband CMOS Radio frequency Transceiver written by David Barras and published by . This book was released on 2010 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Ultra Low Power Impulse Radios written by Alyssa Apsel and published by Springer Science & Business Media. This book was released on 2013-10-29 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental principles behind the design of ultra-low power radios and how they can form networks to facilitate a variety of applications within healthcare and environmental monitoring, since they may operate for years off a small battery or even harvest energy from the environment. These radios are distinct from conventional radios in that they must operate with very constrained resources and low overhead. This book provides a thorough discussion of the challenges associated with designing radios with such constrained resources, as well as fundamental design concepts and practical approaches to implementing working designs. Coverage includes integrated circuit design, timing and control considerations, fundamental theory behind low power and time domain operation, and network/communication protocol considerations.
Download or read book Analysis and Design of Cmos Ultra Wideband Impulse Radio Transceiver written by Li Qiang and published by LAP Lambert Academic Publishing. This book was released on 2010-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultra-wideband (UWB) impulse-radio technology has unique features including high data-rate as well as low power consumption with ranging and localization capabilities. An UWB front-end, however, has to accommodate design challenges resulting from the exceptional wide bandwidth of several GHz. This book discusses the implementation issues of the UWB impulse-radio transceiver front-end, including the performance analysis of practical systems and the design of radio-frequency integrated circuits for transceiver front-ends. A general framework for performance evaluation of practical impulse radio system is proposed and demonstrated in scenarios of high-speed data communications as well as low-data-rate wireless body-area networks. An inductorless low- noise amplifier is designed with syncretic adoption of thermal noise canceling, capacitor peaking, and current reuse. The CMOS ransmit/receive switch design with highest reported bandwidth and power handling capability are discussed with customized transistor layout and triple-well resistive body- floating techniques. The prototypes have been demonstrated in state-of-the-art 130nm CMOS technology.
Download or read book Ultra Low Power Short Range Radios written by Patrick P. Mercier and published by Springer. This book was released on 2015-07-21 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design of ultra-low-power radio-frequency integrated circuits (RFICs), with communication distances ranging from a few centimeters to a few meters. The authors describe leading-edge techniques to achieve ultra-low-power communication over short-range links. Many different applications are covered, ranging from body-area networks to transcutaneous implant communications and smart-appliance sensor networks. Various design techniques are explained to facilitate each of these applications.
Download or read book A Low Power Impulse Radio Ultra wideband Transceiver for Short Range High speed Wireless Communications written by Enrique Barajas Ojeda and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra Low Power FM UWB Transceivers for IoT written by Vladimir Kopta and published by CRC Press. This book was released on 2022-09-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades we have witnessed the increasing popularity of the internet of things. The vision of billions of connected objects, able to interact with their environment, is the key driver directing the development of future communication devices. Today, power consumption as well as the cost and size of radios remain some of the key obstacles towards fulfilling this vision. Ultra-Low Power FM-UWB Transceivers for IoT presents the latest developments in the field of low power wireless communication. It promotes the FM-UWB modulation scheme as a candidate for short range communication in different IoT scenarios. The FM-UWB has the potential to provide exactly what is missing today. This spread spectrum technique enables significant reduction in transceiver complexity, making it smaller, cheaper and more energy efficient than most alternative options. The book provides an overview of both circuit-level and architectural techniques used in low power radio design, with a comprehensive study of state-of-the-art examples. It summarizes key theoretical aspects of FM-UWB with a glimpse at potential future research directions. Finally, it gives an insight into a full FM-UWB transceiver design, from system level specifications down to transistor level design, demonstrating the modern power reduction circuit techniques. Ultra-Low Power FM-UWB Transceivers for IoT is a perfect text and reference for engineers working in RF IC design and wireless communication, as well as academic staff and graduate students engaged in low power communication systems research.
Download or read book A Low Power Super regenerative Impulse Radio Ultra wideband Receiver in CMOS Technology written by Prakash Egambaram Thoppay and published by . This book was released on 2010 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra Wideband written by Ranjit Gharpurey and published by Springer Science & Business Media. This book was released on 2008-03-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of chapters on various aspects of Ultra Wideband. The book includes chapters on Ultra Wideband transceiver implementations, pulse-based systems and one on the implementation for the WiMedia/MBOFDM approach. Another chapter discusses the implementation of the physical layer baseband, including the ADC and post-ADC processing required in the UWB system. Future advances such as multiantenna UWB solutions are also discussed.
Download or read book DIFFERENTIAL CODE SHIFT REFERENCE IMPULSE RADIO ULTRA WIDEBAND TRANSCEIVER written by Bhargava Sahukar and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Baseband Impulse Ultra wideband Transceiver Front end for Low Power Applications written by Ian David O'Donnell and published by . This book was released on 2006 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in indoor wireless communications has been increasing. In addition to high throughput WLAN systems such as 802.11a/b/g/n, attention is also being focused on lower rate, short distance systems such as Bluetooth and Zigbee. These low rate radios are being proposed for a variety of applications including automation/security, smart toys, remote sensing/control, asset tracking, and as a replacement for computer peripheral wires. While not demanding aggressive throughput, these radios do require low cost, power efficient operation and optionally the ability to perform ranging. Unfortunately, currently reported radios are up to an order of magnitude away from these power and cost targets or do not support ranging. However, a recent ruling from the FCC has opened up nearly 8GHz of unlicensed spectrum (from dc to 960MHz and from 3.1GHz to 10.6GHz) for ultra-wideband (UWB) deployment. One attractive method of UWB signaling that seems suited to a low power, highly integrated implementation communicates with short pulses, on the order of a nanosecond, that spread energy over at least 500MHz of bandwidth. Termed "impulse-UWB," the baseband nature of this signaling promises low cost and low power consumption through design simplicity, pulsed (or "duty-cycled") operation, and a "mostly-digital" implementation. The benefits of this approach are balanced by the risk of jamming from in-band interference, of stricter sampling and gain constraints, and of increased digital complexity. This dissertation presents the system exploration, specification, design, and demonstration of a low power, highly integrated, flexible, baseband, impulse ultra-wideband transceiver front-end.
Download or read book Low Power CMOS UWB Impulse Radio Transceiver Front end for Wireless Body Area Networks written by Muhammad Anis and published by . This book was released on 2008 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra Wideband Transceiver Circuits and Systems written by Sumit Bagga and published by Springer. This book was released on 2015-04 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wideband radio technology is not a new concept in the field of RF technology. Decades of research in the area of wideband systems has lead us to new possibilities in the design of low-power, low complexity radios. Ultra-wideband is a direct offspring, which takes the initiative a step further by presenting novel wideband techniques for RF technology. The US FCC position on UWB for commercial usage changed after agreeing to adopt the First Report and Order on February 14, 2002. Unlicensing several gigahertz of frequency spectrum allowed companies to manufacture and market products incorporating UWB technology. At a certain moment, the potential benefits of UWB were outweighed, when existing wireless (narrowband) regulators perceived UWB as a disruptive influence. This, however, did not stop most countries from accommodating and recognizing the true nature of UWB. In brief, the authors have only scratched the surface when it comes to understanding the true potential of UWB technology. The development stage is in its infancy and will necessitate a substantial amount of research to meet industrial specifications. Short-range communications, low-power and low/moderate data rate throughput are the most attractive aspects and promises of UWB technology. For this very reason, applications, such as wireless sensor networks (WSN) are most noticeable.
Download or read book Full band Impulse radio Ultra Wideband Transceivers with Integrated ESD Protection written by Xin Wang and published by . This book was released on 2011 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation describes research and integrated circuit (IC) implementation of a single-full-band carrier-free impulse-radio ultra wideband (IR-UWB) system. The IR-UWB transceiver adopts a simple-most-digital architecture with low design complexity, aiming to achieve the whole IR-UWB system-on-a-chip (SoC) in standard complementary metal-oxide-semiconductor (CMOS) process. Detail analysis for the IR-UWB system architecture is provided. Critical circuit building blocks, such as pulse generator (PG), BPSK modulation, receiver front-end low-noise amplifier (LNA) and correlator, are described both theoretically and experimentally.
Download or read book Design of a Discrete Component Impulse Radio Ultra Wide Band IR UWB Testbed and Design of a Very Low Power IR UWB Transmitter in CMOS Technology written by Edmund James Colli-Vignarelli and published by . This book was released on 2012 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra Wideband and 60 GHz Communications for Biomedical Applications written by Mehmet R. Yuce and published by Springer Science & Business Media. This book was released on 2013-10-16 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the design of devices, systems, and circuits for medical applications using the two recently established frequency bands: ultra-wideband (3.1-10.6 GHz) and 60 GHz ISM band. These two bands provide the largest bandwidths available for communication technologies and present many attractive opportunities for medical applications. The applications of these bands in healthcare are wireless body area network (WBAN), medical imaging, biomedical sensing, wearable and implantable devices, fast medical device connectivity, video data transmission, and vital signs monitoring. The recent technological advances and developments proposed or used in medicine based on these two bands are covered. The book introduces possible solutions and design techniques to efficiently implement these systems in medical environment. All individual chapters are written by leading experts in their fields. Contributions by authors are on various applications of ultra-wideband and the 60 GHz ISM band including circuit implementation, UWB and 60 GHz signal transmission around and in-body, antenna design solution, hardware implementation of body sensors, UWB transceiver design, 60 GHz transceiver design, UWB radar for contactless respiratory monitoring, and ultra-wideband based medical Imaging. The book will be a key resource for medical professionals, bio-medical engineers, and graduate and senior undergraduate students in computer, electrical, electronic and biomedical engineering disciplines.
Download or read book Ultra Low Power Transceiver for Wireless Body Area Networks written by Jens Masuch and published by Springer Science & Business Media. This book was released on 2013-03-28 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless Body Area Networks (WBANs) are expected to promote new applications for the ambulatory health monitoring of chronic patients and elderly population, aiming to improve their quality of life and independence. These networks are composed by wireless sensor nodes (WSNs) used for measuring physiological variables (e.g., glucose level in blood or body temperature) or controlling therapeutic devices (e.g., implanted insulin pumps). These nodes should exhibit a high degree of energy autonomy in order to extend their battery lifetime or even make the node supply to rely on harvesting techniques. Typically, the power budget of WSNs is dominated by the wireless link and, hence, many efforts have been directed during the last years toward the implementation of power efficient transceivers. Because of the short range (typically no more than a few meters) and low data rate (typically in between 10 kb/s and 1 Mb/s), simple communication protocols can be employed. One of these protocols, specifically tailored for WBAN applications, is the Bluetooth low energy (BLE) standard. This book describes the challenges and solutions for the design of ultra-low power transceivers for WBANs applications and presents the implementation details of a BLE transceiver prototype. Coverage includes not only the main concepts and architectures for achieving low power consumption, but also the details of the circuit design and its implementation in a standard CMOS technology.
Download or read book Ultra Wideband Pulse based Radio written by Wim Vereecken and published by Springer Science & Business Media. This book was released on 2009-04-22 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s booming expanse of personal wireless radio communications is a rich source of new challenges for the designer of the underlying enabling te- nologies. Personal communication networks are designed from a fundam- tally different perspective than broadcast service networks, such as radio and television. While the focus of the latter is on reliability and user comfort, the emphasis of personal communication devices is on throughput and mobility. However, because the wireless channel is a shared transmission medium with only very limited resources, a trade-off has to be made between mobility and the number of simultaneous users in a con?ned geographical area. Accord- 1 ing to Shannon’s theorem on channel capacity, the overall data throughput of a communication channel bene?ts from either a linear increase of the tra- mission bandwidth, or an (equivalent) exponential increase in signal quality. Consequently, it is more bene?cial to think in terms of channel bandwidth than it is to pursue a high transmission power. All the above elements are embodied in the concept of spatial ef?ciency. By describing the throughput of a system 2 in terms of bits/s/Hz/m , spatial ef?ciency takes into account that the use of a low transmission power reduces the operational range of a radio transmission, and as such enables a higher reuse rate of the same frequency spectrum.
