Download or read book History of the Lumber Industry in the State of New York written by William Freeman Fox and published by . This book was released on 1976 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: A history of the lumber industry in the state of New York This book, "A history of the lumber industry in the state of New York," by William F. Fox, is a replication of a book originally published before 1902. It has been restored by human beings, page by page, so that you may enjoy it in a form as close to the original as possible.
Download or read book A History of the Lumber Industry in the State of New York Classic Reprint written by William F. Fox and published by . This book was released on 2017-07-25 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A History of the Lumber Industry in the State of New YorkFrom the time when the pioneers first swung their axes in the primeval forests of New York, lumbermen have been closely connected with the industrial progress and development of the State. The first settler was the first lumberman; and his work commenced when he felled the trees to make a clearing in the forest for his cabin and his crops. Although this use of the ax alone would hardly constitute lumbering as understood to-day, still it was not many years until a sawmill appeared in each settlement and the lumber industry was formally inaugurated.Of necessity, the first colonists went without sawmills longer than the later ones. They made rough lumber for their houses, barns, and fences with their axes, supplemented at times by saws, large and small, worked by hand-power. But in the later settlements, which in the beginning of the last century included three-fourths of the State, a sawmill was built in each locality within ten or fifteen years after the first family moved in. In many instances the sawmill preceded the gristmill; and in a few places the erection of the mill antedated the advent of the first settlers.About the PublisherForgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.comThis book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A History of the Lumber Industry in the State of New York written by William Freeman Fox and published by . This book was released on 1902 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History of the lumber industry in the State of New York written by William Freeman Fox and published by . This book was released on 1901 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A History of the Lumber Industry in the State of New York written by William Freeman Fox and published by . This book was released on 1902 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A History of the Lumber Industry in the State of New York written by William Freeman Fox and published by Theclassics.Us. This book was released on 2013-09 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1902 edition. Excerpt: ...same time preserve a practicable grade. It should be downhill all the way from the starting point, so that large loads can be hauled, and yet not so steep as to shove a team over the bank. Skill and experience are called for in the construction of side-hill or dugway roads, in bridge building, and in corduroying swamps. The camps having been built, the bark peeled and ranked, and the skidways piled high with logs (PI. XIII), upon the first deep snow the hauling commences. The roads are sprinkled from a large water tank, drawn on a sleigh, until a good ice bottom is formed, while on the steep grades sand and gravel are thickly spread to retard the speed of the loaded sleighs. Soon the landing or banking ground becomes a scene of activitj'. Teams drive up in quick succession to be unloaded, binding chains are unfastened by the unloaders, and the huge loads roll off the sleighs with a bumping, thumping noise as the logs rebound from the frozen earth. The teamsters vie with each other in the size of their loads; and with the wide "bunks" now in use, iced roads, and heavy teams, a pyramid of logs is rolled up on the sleigh at the skidways until the driver, astride on the top log, is perched 10 feet or more above the ground. (PI. XIV, fig. 2.) Some of the "champion" loads contain from 5,000 to 6,000 feet, although smaller ones are the general rule. A teamster is expected to make a specified number of trips each day, according to the length of the haul, which varies in most jobs from 1 to 4 miles, sometimes more. He must needs go to sleep early, because he must be up long before daylight, feed his team, get his Fig. 1.--Cutting Spruce Logs, Hamilton County. Fig. 2.--Measuring And Marking Logs On The Skids. en c 2 2 m P N r o OD breakfast, and he...
Download or read book A history of the lumber industry in the State of New York written by William F. Fox and published by . This book was released on 1902 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A History of the Lumber Industry in the State of New York written by William Freeman Fox and published by . This book was released on 1976 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Chicago written by George W. Hotchkiss and published by Forgotten Books. This book was released on 2018-09-02 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Industrial Chicago: The Lumber Interests The settlement of New Connecticut on the Western Reserve, Ohio, which practically dated from about 1826 or 1830, was but the pushing farther of the outposts which were the result of the emigration from New England into the central and western portions of New York and Pennsylvania. While a few small settlements dotted the banks of the Mississippi from St. Louis to New Orleans, the upper Mississippi and the country west of it were practically unknown except as Indian lands, and he was indeed a hardy and daring pioneer who ventured as far west as the Great Lakes, and small indeed the chances of the adventurer who sought to penetrate the region beyond. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book HIST OF THE LUMBER INDUSTRY IN written by William F. (William Freeman) 1840 Fox and published by . This book was released on 2016-08-26 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New York Timber Industries written by Robert L. Nevel Jr. and published by Forgotten Books. This book was released on 2018-03-18 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from New York Timber Industries: A Periodic Assessment of Timber Output Long-term production trends will be disclosed by repeated surveys in the future. Until a data base is built up over time, the reader is cautioned to use the current statistics prudently. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Lumber Industry and Its Workers Classic Reprint written by Industrial Workers of the World and published by Forgotten Books. This book was released on 2018-03-06 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Lumber Industry and Its Workers In Agriculture the farmer must have lumber to build his dwelling house, barn, granaries, silos, etc. To fence his fields he must have wooden posts; often the entire fence is made of wood. He picks his fruit from a wooden ladder, packs it in wooden boxes, with wood pulp paper, and hauls it to the railroad in a wooden wagon. Wood forms a part of all agricultural tools, implements and machinery. Late statistics show that the present demand for wood for farm implements exceeds feet a year, and if the wood that goes into agricultural hand tools were added the total would probably exceed feet. In the Mining Industry wood is used to timber the mines to prevent them from caving in. Wooden ties support the tracks in and around the mines. Wooden cars transport the coal or ore from the working to the shaft. Shaft houses and other build ings around the mines are built wholly or partly of lumber. In coal mining, timber forms the principal part of tipples, washers, etc. Wood forms part of some of the mining tools and machin ery. Without lumber it would be practically impossible to carry on mining. In the Construction Industry lumber is one of the principal raw materials. Even when the main part of a building is of some other material (such as brick, stone, steel or concrete) lumber is used for floors, ceilings, laths, window frames, doors, and in many other ways. On buildings lumber is used for stag ing. On concrete work to construct the forms, and for temporary supports. On railroad and general construction work timber is used for bridge building, for culverts, for piling, railroad ties, etc. Wood forms an important part of the machinery of con struction, such as derricks, steam shovels, dump cars and the like. Most of the tools used in this industry are part wood. Lumber is used to build the camps which shelter the men and animals employed. If the supply of lumber were cut off it would only be a short time before the entire building industry would be forced to shut down. The Transportation Industry is literally supported by wood. The miles of railroad track in the United States rest on wooden ties. It is estimated that the railroad and electric lines of the country use approximately one hundred and twenty mill ion ties every year. The vast network of telegraph and tele phone wires that covers the country is upheld by wooden poles. By far the greater part of the rolling stock is built of lumber. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Study of the Massachusetts Wood Using Industries Classic Reprint written by Hugh Maxwell and published by . This book was released on 2015-08-05 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from A Study of the Massachusetts Wood-Using Industries The Bureau of the Census, in co-operation with the United States Forest Service, compiles and publishes statistics annually, showing the output of sawmills by States and for the whole country. The cut in Massachusetts in 1908 was 384,526,000 feet B. M., reported by 610 sawmills. This did not include pulpwood, tanbark, tanning extracts, cross-ties, telegraph and telephone poles, or cooperage and veneer stocks. After lumber leaves the sawmill it serves many purposes. Some of it passes through no further process of manufacture, but goes into buildings with only the cutting and fitting which carpenters give it. Another part is further manufactured before it is used. Woodworking machines of many kinds change its form, and it is cut, joined and fitted by skilled labor, becoming, partly or wholly, a finished product, - boxes, frames, doors, sash, vehicles, boats, shuttles, spools, lasts, baskets, musical instruments, furniture, handles, toys, brushes and many more. This study has to do with that part of lumber only which undergoes further process of manufacture after it leaves the sawmill. Heretofore, lumber has not been very carefully followed after it leaves the saw, to ascertain what becomes of it, what is made of it, and into what commodities it enters. In a general way it has been known that some of it is used in its rough form, and some passes through further process of manufacture. The present study of the wood-manufacturing industries of Massachusetts was undertaken to supply information concerning the lumber which is not used in its rough form. The work has been done in co-operation by the United States Forest Service and the State of Massachusetts. Industries which manufacture commodities wholly or partly of wood were asked to furnish data along their special lines, and this report is based on their replies, supplemented by independent investigations throughout the State. Statistics thus collected and published are expected to be useful to both growers and manufacturers of wood. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Organization of the Lumber Industry written by Wilson Compton and published by Forgotten Books. This book was released on 2017-01-24 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Organization of the Lumber Industry: With Special Reference to the Influences Determining the Prices of Lumber in the United States Sawmills therefore use as raw material a natural product the total supply Of which is known, inconvenient Of transportation and originating in sources nearby. Mills have been located with reference to cheap log supply rather than to convenience in marketing their product.9 The steadily increasing relative exhaustion of the raw material Of lumber manufacture is attested by the fact that one-half Of the original stand of merchantable virgin timber in continental United States has been consumed and that the present rate of total annual growth is about one-third of that of the annual cut. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book History of the Lumber Industry of America written by James Elliott Defebaugh and published by . This book was released on 1906 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Lumber Cut of the United States 1906 Classic Reprint written by Usda Forest Service and published by Forgotten Books. This book was released on 2018-11-20 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Lumber Cut of the United States, 1906 No claim is made that the figures here presented are absolutely correct for the quantity and value of the lumber output of the various States in 1906, but they are close approximations. There are a large number of small and portable sawmills throughout the country which were not reached, but the influence of their combined output upon. The total is relatively slight, as shown by a comparison of the reports from New York in'1905 and in 1906. The Forest, Fish, and Game Commission obtained reports from mills in that State. In 1905, and from mills in 1906, an increase of 113 per cent in the number of reports; but the total quantity of lumber reported in 1906 was but 8 per cent greater than that in 1905. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Wood Using Industries of Connecticut Classic Reprint written by Albert H. Pierson and published by Forgotten Books. This book was released on 2018-01-03 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Wood-Using Industries of Connecticut Connecticut is one of the most densely populated states of the Union. Its square miles are occupied by over a million inhabitants. A very large percentage of its people reside within two score manufacturing centers and depend directly upon indus trial employment for a livelihood. The various industries include nearly factories, with an invested capital of more than a third of a billion dollars, an annual output worth a like sum, and a payroll of some millions. A considerable number of these factories convert the raw material of the forest into finished products. The report of the lumber cut of the United States in 1910, prepared by the Bureau of the Census in coopera tion with the Forest Service, United States Department of Agri culture, shows that the Connecticut sawmills cut over board feet in that year. Part of the lumber made'in the State is shipped away, and of the total domestic consumption probably one-fourth IS utilized In rough lumber and In general construction. The total consumed by the Connecticut wood -using industries in 1910, including lumber purchased from other states, amounted to 110 feet. The amount of wood taken from the forests in forms other than lumber has been only roughly estimated, but the quantity of lumber annually milled in Connecticut has been determined for some years. This is the first attempt to follow the lumber from the sawmill through the factories. The information here presented shows the relations between the wood - using industries of Connecticut and her forests. It also shows to what extent the State's native resources are drawn upon to meet home requirements, and to what extent manufacturers draw from outside. This report is intended to answer the question of what becomes Of the seventy-two or seventy-three million feet of rough lum ber that are used each year in Connecticut's wood - using factories. It also discusses properties of the various woods that fit them for use in certain industries and the products made from these woods. It gives the average cost of lumber delivered at the factory, both home - grown and shipped - in material. The prices given, it must be remembered, are not market prices, but are merely an average computed from many different grades and forms of each kind of wood reported. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
