Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by William Burton Pearson and published by . This book was released on 1958 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by W. B. Pearson and published by Elsevier. This book was released on 2013-09-17 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Handbook of Lattice Spacing and Structures of Metals and Alloys is a 12-chapter handbook that describes the structures and lattice spacings of all binary and ternary alloys. This book starts with an introduction to the accurate determination of structure and lattice spacings. The subsequent chapters deal with the role of structure determination and lattice spacings in alloy formation, as well as the application of this determination to the equilibrium diagram examination. These topics are followed by discussions on the correlation of lattice spacing and magnetic property, including X-ray crystallographic data for those structures allotted a “Strukturbericht type. The remaining chapters contain table lists information about the crystal structures, densities, and expansion coefficients of the elements. These chapters also present further information about lattice spacing and structure determination on metals in alphabetical order. This book is of value to physicists and metallurgists.

Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by William B. Pearson and published by . This book was released on 1958 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys 2 written by William Burton Pearson and published by . This book was released on 1967 with total page 1446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by W. B. Pearson and published by . This book was released on 1967 with total page 1446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook of Lattice Spacings and Structures of Metals and Alloys written by William Burton Pearson and published by . This book was released on 1967 with total page 1446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook Spacings and Structures of Metals and Alloys written by William B. Pearson and published by . This book was released on 1958 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A handbook of spacings and structures of metals and alloys written by William Burton Pearson and published by . This book was released on 1967 with total page 1446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook of Lattice spacing and structures of metals and alloys written by W. B. Pearson and published by . This book was released on 1967 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Handbook and Structures of Metals and Alloys written by W. B. Pearson and published by . This book was released on 1958 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structure of Metals written by Charles S. Barrett and published by . This book was released on 2008 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure of Metals GRYSTALLOGRAPHIG METHODS, PRINCIPLES, AND - DATA BY CHARLES H. BARRETT, PH. D. Associate Professor of Metallurgical Engineering and Member of Staff of the Metals Research Laboratory Carnegie Institute of Technology FIRST EDITION F 1 FT 1 1 I M PRESS ION MoGBAW-HILL BOOK COMPANY, INC. NEW YORK AND LONDON 1943 STRUCTURE OF MKTALS COPYRIGHT. 1943, BY THE MrGRAW-HiLL BOOK COMPANY, INC. PRINTED IK THB UNITED STATES OF AMERICA All rights reserved. This book, or parts thereof, may not be reproduced in any form without permission of the publishers. PREFACE This book is intended to serve both as a text and as a reference book. The portions intended for classroom use have been written for courses in crystallography, particularly the courses offered to students of metallurgy. It is primarily intended for graduate courses, but a number of chapters are at a level appropriate for advanced undergraduate courses in applied x-rays, crystallography, and physical metallurgy Chaps. I to IV, IX to XI, XIII. In an effort to make the book more readable, certain advanced topics on x-ray diffraction and various tables of data have been placed in appendixes, and laboratory manipulations that would not interest the general reader have been printed in smaller type. The first four chapters of this book explain the fundamentals of crystal lattices and projections, and the general principles of the diffrac tion of x-rays from Crystals. Chapters V to VII cover the technique of x-ray diffraction, presenting the operating details of the methods that are in common use. Several chapters are included on the applica tions of x-ray diffraction in the field of physical metallurgy, covering techniques fordetermining constitution diagrams, identifying unknown materials, determining crystal structures, determining the orientation of single crystals, detecting and analyzing preferred orientations, and measuring stresses. One chapter is devoted to electron diffraction, its metallurgical uses, and the precautions to be observed in interpreting electron diffrac tion data. The electron microscope receives only a brief mention because at the time the manuscript was written the metallographic technique for this instrument was still being rapidly developed and, except for particle-size determinations, the instrument had not yet achieved the status of a widely accepted tool in metallographic or crystallographic research. The last half of the book is devoted to the results of research and contains extensive reviews of fields that are of current interest. In assembling these summaries, an effort has been made to include an ade quate number of references to the literature, to cover thoroughly the subjects that have not been extensively reviewed in readily available publications, and to maintain a critical but unbiased attitude toward the data and conclusions that are reviewed. The subjects treated include the following principles governing the crystal structure of metals and vi PREPACK alloys supcrlattices and their effect on properties imperfections in crystals the structure of liquid metals the processes of slip, twinning, and fracture and modern theories of these processes, including the cur rent dislocation theory the effects of cold work and annealing on the structure of metals, including the effects on diffraction patterns of static and fatigue stressing, rolling, grinding, and polishing theresults of x-ray studies of internal stresses preferred orientations resulting from cold work, hot work, recrystallization, freezing, electrodeposition, evapora tion, and sputtering directionality in commercial products and in single crystals and its relation to crystal orientation. The author is indebted to many colleagues and graduate students who have assisted directly and indirectly in the preparation of this book. He particularly wishes to thank Dr. R. F...

Download or read book The Structure of Metals and Alloys written by William Hume-Rothery and published by . This book was released on 1969 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook for students at universities and technical colleges.

Download or read book Compendium of Phase Diagram Data written by Erwin Rudy and published by . This book was released on 1969 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developments in the Structural Chemistry of Alloy Phases written by B. C. Giessen and published by Springer. This book was released on 2013-12-14 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interstitial Alloys written by H. J. Goldschmidt and published by Elsevier. This book was released on 2016-01-22 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interstitial Alloys covers the significant progress in the development and understanding of the principles and applications of interstitial alloys. Interstitial alloy refers to the existence of a pure metal lattice, which the metal-metal atom bond remains the dominant one, and the non-metal atoms are sufficiently small to be accommodated within the metal lattice without, or with only a limited degree of, distortion from metal-type symmetry. This book contains 10 chapters and begins with a brief introduction to the basic principles of interstitial alloys. The next two chapters describe the physical properties of these alloys, along with their behavior in solid solutions. The remaining chapters deal with a specific interstitial alloy, its structure, physico-chemical properties, preparation, and application. This work specifically considers carbide, nitride, boride, silicide, oxide, hydride, and mixed interstitial alloys. This book will be of value to chemists and physicists.

Download or read book Phase Diagrams 6 II written by Allen Alper and published by Elsevier. This book was released on 2012-12-02 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Diagrams: Materials Science and Technology, Volume II covers the use of phase diagrams in metals, refractories, ceramics, and cements. Divided into 10 chapters, this volume first describes the main features of phase diagrams representing systems in which the oxygen pressure is an important parameter, starting with binary systems and proceeding toward the more complicated ternary and quaternary systems. The subsequent chapters discuss the application of phase diagrams in several refractory systems. A chapter covers the procedures used for cement production and some of the available phase-equilibrium data and their application to specific situations. This volume also deals with the application of phase diagrams to extraction metallurgy, with an emphasis on oxide systems, as well as in ceramic and metal sintering. The concluding chapters explore the relationship of heat treatment of metals and alloys to their phase diagrams. These chapters also deal with the use of phase diagrams in several techniques of joining metals, such as fusion welding, brazing, solid-state bonding, and soldering. This volume will be useful to all scientists, engineers, and materials science students who are investigating and developing materials, as well as to the end users of the materials.

Download or read book NASA Technical Note written by and published by . This book was released on 1975 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: