Download or read book A Guide to the Literature and Patents Concerning Polyvinyl Chloride Technology written by Society of Plastics Engineers. Bibliography Committee of the Vinyl Professional Activity Group and published by . This book was released on 1961 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to the Literature and Patents Concerning Polyvinyl Chloride Technology Edited by Lloyd R Whittington Compiled by the Bibliography Committee of the Vinyl Professional Activities Group Society of Plastics Engineers Inc written by Lloyd R. ed Whittington and published by . This book was released on 1963 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to the Literature and Patents Concerning Polyvinyl Chloride Technology written by Society of Plastics Engineers. Bibliography Committee of the Vinyl Professional Activities Group and published by . This book was released on 1963 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PVC Technology written by M.V. Titow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book continues the tradition of the first two editions of the late W. S. Penn's original PVC Technology, and the extensively revised third (1971) edition prepared by myself and B. J. Lanham. In the present edition the original general format, and the arrange ment of chapters, have been largely preserved, but virtually nothing now remains of Penn's own text: a part of the contents is based on material from the 1971 TitowlLanham version (revised, updated and mainly rewritten): the rest is new, including, inter alia, several chapters specially contributed by experts from the plastics industry in the UK and Europe. The section listing international (ISO) and national (BS, ASTM and DIN) standards relevant to PVC, which was first intro duced (as Appendix 1) in the 1971 edition, proved a popularfeature: it has now been brought up to date and considerably extended. Two further appendices provide, respectively, comprehensive unit conver sion"tables (with additional information on some ofthe mostfrequently encountered units, and the SI units), and a list of many properties of interest in PVC materials, with definitions, typical numerical values, and references~to relevant standard test methods. For various reasons, work on this edition involved more than the usual quota of problems: I am truly grateful to the Publisher's Manag ing Editor, Mr G. B. Olley, for his understanding, patience, unfailing courtesy and friendly encouragement.
Download or read book Handbook of Vinyl Formulating written by Richard F Grossman and published by John Wiley & Sons. This book was released on 2008-05-02 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is your starting point and complete guide to polyvinyl chloride (PVC) formulation. It covers the basics of vinyl formulation, starting formulations for compounds, and the latest compounding ingredients. Since publication of the acclaimed first edition, a standard reference used by vinyl technologists around the world, there have been many new developments in vinyl formulation as well as new discoveries and insights into the underlying mechanisms. It's all covered here in the second edition, in one highly readable, expertly organized volume.
Download or read book Encyclopedia of PVC Second Edition written by Leonard I. Nass and published by CRC Press. This book was released on 1992-08-28 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated throughout, this second edition covers significant changes and advances in PVC science and technology.;Volume 3 examines such diverse subjects as: PVC compounding equipment, compounding process control, solid and liquid compound process development, compound and product specifications, test methods with an interpretation of test results, environmental and occupational safety, and melt processing.;Providing over 700 literature references, volume 3 is intended for polymer, plastics, physical, organic, surface, and colloid chemists; plastics, chemical, materials, mechanical, and manufacturing engineers and technical personnel; and graduate and postgraduate students in these disciplines.
Download or read book PVC Plastics written by W. V. Titow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originated from my Publisher's request for anew, concise account of PVC plastics in terms of their nature, properties, process ing, and applications. There is thus, inevitably, an extensive thematic overlap with my-still relatively recent-PVC Technology (4th edi tion), and I have drawn liberally on that source for a substantial amount of relevant basic material. However, the present book is by no means merely an abridgement of the earlier one: whilst indeed considerably shorter, it is not only comparable in scope and general coverage of the subject, but also contains much new information. I have made a point of again strongly featuring the numerous standards relevant-and in many cases cardinal-to the testing and characterisa tion of PVC materials and products, and to the evaluation of their properties and performance: these standards are an indispensable part of the technology of PVC plastics, and nobody concerned with any aspect of this complex subject should fail to recognise that fact. It is ever a pleasure to express appreciation and thanks where they are due. I am grateful to Dipl-Ing. H. E. Luben of Brabender OHG, Duisburg, FRG, not only for the up-to-date information he provided on Brabender equipment, but also most particularly for his exception ally friendly, helpful attitude in all our contacts, and for the trouble he took to make some illustrations and figures available in the form convenient for direct reproduction.
Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.
Download or read book PVC Degradation and Stabilization written by George Wypych and published by Elsevier. This book was released on 2015-03-18 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: PVC stabilization, the most important aspect of formulation and performance of this polymer, is discussed in details. This book contains all information required to design successful stabilization formula for any product made out of PVC. Separate chapters review information on chemical structure, PVC manufacturing technology, morphology, degradation by thermal energy, UV, gamma, other forms of radiation, mechanodegradation, and chemical degradation. The chapter on analytical methods used in studying of degradative and stabilization processes helps in establishing system of checking results of stabilization with different stabilizing systems. Stabilization and stabilizers are discussed in full detail in the most important chapter of this book. The final chapter contains information on the effects of PVC and its additives on health, safety and environment. This book contains analysis of all essential papers and patents published until recently on the above subject. It either locates the answers to relevant questions and offers solutions or gives references in which such answers can be found. PVC Degradation and Stabilization is must to have for chemists, engineers, scientists, university teachers and students, designers, material scientists, environmental chemists, and lawyers who work with polyvinyl chloride and its additives or have any interest in these products. This book is the one authoritative source on the subject. A practical and up-to-date reference guide for engineers and scientists designing with PVC Covers thermal, UV, gamma radiation, chemical, and other forms of degradation Includes a critical discussion of the sustainability issues faced by PVC and its additives, as well as health and safety concerns
Download or read book History of Polymeric Composites written by Raymond Benedict Seymour and published by VSP. This book was released on 1987-12 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The commercial use of polymers in plastics, elastomers, coatings and adhesives almost always involves the use of additives to enhance their properties. Thousands of years natural polymers have been blended with naturally occurring fillers, fibers and many other substances. In this century, the development of synthetic polymers has led to the development of high performance polymer composites. This volume is the only text describing origin and use of additives and their function in polymeric composites. A panel of outstanding specialists in the field of additives have placed this in a historic perspective. Apart from this, up-to-date information on all fillers, reinforcing agents, stabilizers, plasticizers, flame retardants, accelerators, etc. can be found in the volume.
Download or read book Macromolecules written by Hans-Georg Elias and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like so many of its kind, this textbook originated from the requirements of teaching. While lecturing on macromolecular science as a required subject for chemists and materials scientists on the undergraduate, graduate, and postgraduate levels at Swiss Federal Institute of Technology at Zurich (1960-1971), I needed a one-volume textbook which treated the whole field of macromolecular science, from its chemistry and physics to its applications, in a not too elementary manner. This textbook thus intends to bridge the gap between the often oversimplified introductory books and the highly specialized texts and monographs that cover only parts of macromolecular science. This first English edition is based on the third German edition (1975), which is about 40% different from the first German edition (1971), a result of rapid progress in macromolecular science and the less rapid education of the writer. This text intends to survey the whole field of macromolecular science. Its organization results from the following considerations. The chemical structure of macromolecular compounds should be independent of the method of synthesis, at least in the ideal case. Part I is thus concerned with the chemical and physical structure of macro molecules. Properties depend on structure. Solution properties are thus discussed in Part II, solid state properties in Part III. There are other reasons for discussing properties before syntheses: For example, it is difficult to under stand equilibrium polymerization without knowledge of solution thermody of the glass temperature, etc.
Download or read book The History of P V C written by Morris Kaufman and published by . This book was released on 1969 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PVC Technology written by W. V. Titow and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Papers Presented at the National Technical Conference written by Society of Plastics Engineers and published by . This book was released on 1963 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polyvinyls Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyvinyls—Advances in Research and Application: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Polyvinyl Chloride. The editors have built Polyvinyls—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Polyvinyl Chloride in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Polyvinyls—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Society of the Plastics Industry and published by Van Nostrand Reinhold Company. This book was released on 1976 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Classed Subject Catalog written by Engineering Societies Library and published by . This book was released on 1965 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
