Download or read book A Geometrically Exact Thin walled Beam Theory Considering In plane Cross section Distortion written by Fang Yiu and published by . This book was released on 2005 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Thin Walled Beams written by Yoon Young Kim and published by Springer Nature. This book was released on 2023-05-20 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to an advanced beam theory applicable to thin-walled beams of rectangular and arbitrarily-shaped cross-sections. Furthermore, it describes a unique beam-based approach to handling joint structures consisting of thin-walled beams, compiled here for the first time. This higher-order beam theory (HoBT), developed by the authors over the past two decades, uses more than six degrees of freedom (DOFs) in contrast to the classical theories, which use only six DOFs. The additional degrees of freedom describe sectional deformations such as warping and distortion. This book presents a novel systematic procedure to derive the sectional deformations analytically for rectangular cross-sections and numerically for arbitrarily-shaped cross-sections. This book is a must for structural/mechanical engineers who wish to understand and design structures involving thin-walled beams.
Download or read book Mathematical Models of Beams and Cables written by Angelo Luongo and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear models of elastic and visco-elastic onedimensional continuous structures (beams and cables) are formulated by the authors of this title. Several models of increasing complexity are presented: straight/curved, planar/non-planar, extensible/inextensible, shearable/unshearable, warpingunsensitive/ sensitive, prestressed/unprestressed beams, both in statics and dynamics. Typical engineering problems are solved via perturbation and/or numerical approaches, such as bifurcation and stability under potential and/or tangential loads, parametric excitation, nonlinear dynamics and aeroelasticity. Contents 1. A One-Dimensional Beam Metamodel. 2. Straight Beams. 3. Curved Beams. 4. Internally Constrained Beams. 5. Flexible Cables. 6. Stiff Cables. 7. Locally-Deformable Thin-Walled Beams. 8. Distortion-Constrained Thin-Walled Beams.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Machinery Materials Science and Engineering Application written by M. Chen and published by IOS Press. This book was released on 2022-10-11 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keeping up to date with advances in material science and applied engineering is essential for those working in the field if they are to understand and tackle the challenges they face in an efficient manner and adopt the best and most appropriate solutions available. This book presents the proceedings of MMSE 2022, the 8th International Conference on Advances in Machinery, Materials Science and Engineering Application, held as a hybrid event (both in-person and online) in Wuhan, China, on 23 and 24 July 2022. For the past 12 years, the MMSE international conferences have collated recent advances and experiences, identified emerging trends in technology and encouraged lively debate between students, specialists, engineers and associations from around the world, all of which have had a positive impact in helping to address the world’s engineering challenges. The book contains 121 papers, selected by means of a rigorous international peer-review process by editors and reviewers from the 215 submissions received. Topics covered include the latest advancements in applied mechanics, intelligent manufacturing technology, mechanical and electromechanical engineering, heat transfer, combustion, advanced materials sciences, industrial applications, applied mathematics, simulation and interdisciplinary engineering. Presenting a wealth of exciting ideas for solving real problems in the real world and opening novel research directions, the book will be of interest to materials specialists and engineers from both academia and industry everywhere.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexural Torsional Buckling of Structures written by N. S. Trahair and published by CRC Press. This book was released on 1993-07-20 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexural-Torsional Buckling of Structures provides an up-to-date, comprehensive treatment of flexural-torsional buckling and demonstrates how to design against this mode of failure. The author first explains the fundamentals of this type of buckling behavior and then summarizes results that will be of use to designers and researchers in either equation or graphical form. This approach makes the book an ideal text/reference for students in structural engineering as well as for practicing civil engineers, structural engineers, and constructional steel researchers and designers. The book begins by introducing the modern development of the theory of flexural-torsional buckling through discussions on the general concepts of equilibrium, total potential, virtual work, and buckling. It then continues with in-depth coverage of hand methods for solving buckling problems, the analysis of flexural-torsional buckling using the finite element method, and the buckling of different types of structural elements and frames composed of various elastic materials. Other topics addressed include the design and inelastic buckling of steel members. The book's final chapter considers a collection of special topics.
Download or read book Advanced Mechanics of Materials written by Robert Davis Cook and published by Pearson. This book was released on 1999 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one/two-semester upper-level undergraduate/graduate-level second course in Mechanics of Materials. This text covers all topics usually treated in an advanced mechanics of materials course. Throughout, topics are treated by extending concepts and procedures of elementary mechanics of materials, assisted when necessary by advanced methods such as theory of elasticity.
Download or read book Stability and Ductility of Steel Structures 2019 written by František Wald and published by CRC Press. This book was released on 2019-08-30 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than forty years the series of International Colloquia on Stability and Ductility of Steel Structures has been supported by the Structural Stability Research Council (SSRC). Its objective is to present the latest results in theoretical, numerical and experimental research in the area of stability and ductility of steel and steel-concrete composite structures. In Stability and Ductility of Steel Structures 2019, the focus is on new concepts and procedures concerning the analysis and design of steel structures and on the background, development and application of rules and recommendations either appearing in recently published Codes or Specifications and in emerging versions, all in anticipation of the new edition of Eurocodes. The series of International Colloquia on Stability and Ductility of Steel Structures started in Paris in 1972, the last five being held in: Timisoara, Romania (1999), Budapest, Hungary (2002), Lisbon, Portugal (2006), Rio de Janeiro, Brazil (2010) and Timisoara, Romania (2016). The 2019 edition of SDSS is organized by the Czech Technical University in Prague.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1989 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Improved First approximation Theory for Thin Shells written by J. Lyell Sanders and published by . This book was released on 1960 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural and Stress Analysis written by T.H.G. Megson and published by Elsevier. This book was released on 2005-02-17 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure. The new edition of this popular textbook provides the student with a comprehensive introduction to all types of structural and stress analysis, starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. Building on the success of the first edition, new material on structural dynamics and finite element method has been included.Virtually no prior knowledge of structures is assumed and students requiring an accessible and comprehensive insight into stress analysis will find no better book available. - Provides a comprehensive overview of the subject providing an invaluable resource to undergraduate civil engineers and others new to the subject - Includes numerous worked examples and problems to aide in the learning process and develop knowledge and skills - Ideal for classroom and training course usage providing relevant pedagogy
Download or read book Thin walled Elastic Beams written by Vasiliǐ Zakharovich Vlasov and published by . This book was released on 1963 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coplanar Waveguide Circuits Components and Systems written by Rainee N. Simons and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of the analysis and applications of coplanar waveguides to microwave circuits and antennas The unique feature of coplanar waveguides, as opposed to more conventional waveguides, is their uniplanar construction, in which all of the conductors are aligned on the same side of the substrate. This feature simplifies manufacturing and allows faster and less expensive characterization using on-wafer techniques. Coplanar Waveguide Circuits, Components, and Systems is an engineer's complete resource, collecting all of the available data on the subject. Rainee Simons thoroughly discusses propagation parameters for conventional coplanar waveguides and includes valuable details such as the derivation of the fundamental equations, physical explanations, and numerical examples. Coverage also includes: Discontinuities and circuit elements Transitions to other transmission media Directional couplers, hybrids, and magic T Microelectromechanical systems based switches and phase shifters Tunable devices using ferroelectric materials Photonic bandgap structures Printed circuit antennas
Download or read book Finite Element Analysis Concepts written by J. E. Akin and published by World Scientific. This book was released on 2010 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Young engineers are often required to utilize commercial finite element software without having had a course on finite element theory. That can lead to computer-aided design errors. This book outlines the basic theory, with a minimum of mathematics, and how its phases are structured within a typical software. The importance of estimating a solution, or verifying the results, by other means is emphasized and illustrated. The book also demonstrates the common processes for utilizing the typical graphical icon interfaces in commercial codes. in particular, the book uses and covers the widely utilized SolidWorks solid modeling and simulation system to demonstrate applications in heat transfer, stress analysis, vibrations, buckling, and other fields. The book, with its detailed applications, will appeal to upper-level undergraduates as well as engineers new to industry.
Download or read book Journal written by Institution of Mechanical Engineers (Great Britain) and published by . This book was released on with total page 1504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MARE WINT written by Wiesław Ostachowicz and published by Springer. This book was released on 2016-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines. The research was carried out under the auspices of the EU-funded project, MARE-WINT. The project provided a unique opportunity for a group of researchers to work closely together, undergo multidisciplinary doctoral training, and conduct research in the area of offshore wind energy generation. Contributions from expert, external authors are also included, and the complete work seeks to bridge the gap between research and a rapidly-evolving industry.
