Download or read book A Dynamic Model for Inventory Management and Production Planning written by Gustavo C. Quintana and published by . This book was released on with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Stage Production Planning and Inventory Control written by Sven Axsäter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper treats a two-echelon inventory system. The higher echelon is a single location reffered to as the depot, which places orders for supply of a single com modity. The lower echelon consists of several points, called the retailers, which are supplied by shipments from the depot, and at which random demands for the item occur. Stocks are reviewed and decisions are made periodically. Orders and/or shipments may each require a fixed lead time before reaching their respective desti nations. Section II gives a short literature review of distribution research. Section III introduces the multi-echelon distribution system together with the underlying as sumptions and gives a description of how this problem can be viewed as a Markovian Decision Process. Section IV discusses the concept of cost modifications in a distribution context. Section V presents the test-examples together with their optimal solutions and also gives the characteristic properties of these optimal solutions. These properties then will be used in section VI to give adapted ver sions of various heuristics which were used in assembly experiments previously and which will be tested against the test-examples.
Download or read book Production and Inventory Management with Substitutions written by J. Christian Lang and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitativeapproachesforsolvingproductionplanningandinventorymanagement problems in industry have gained growing importance in the past years. Due to the increasinguse of AdvancedPlanningSystems, a widespreadpracticalapplicationof the sophisticated optimization models and algorithms developed by the Production Management and Operations Research community now seem within reach. The possibility that productscan be replaced by certain substitute productsexists in various application areas of production planning and inventory management. Substitutions can be useful for a number of reasons, among others to circ- vent production and supply bottlenecks and disruptions, increase the service level, reduce setup costs and times, and lower inventories and thereby decrease ca- tal lockup. Considering the current trend in industry towards shorter product life cycles and greater product variety, the importance of substitutions appears likely to grow. Closely related to substitutions are ?exible bills-of-materials and recipes in multi-level production systems. However, so far, the aspect of substitutions has not attracted much attention in academic literature. Existing lot-sizing models matching complex requirements of industrial optimization problems (e.g., constrained capacities, sequence-dependent setups, multiple resources) such as the Capacitated Lot-Sizing Problem with Sequence-Dependent Setups (CLSD) and the General Lot-Sizing and Scheduling Problem for Multiple Production Stages (GLSPMS) do not feature in substitution options.
Download or read book Planning Production and Inventories in the Extended Enterprise written by Karl G. Kempf and published by Springer Science & Business Media. This book was released on 2011-01-12 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps.
Download or read book A dynamic model for production smoothing and inventory control with stochastic demand written by Shyam L. Moondra and published by . This book was released on 1982 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulating Business Dynamics written by Juan García and published by . This book was released on 2019-10-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: INDEX OF PAPERS Paper 1. New Technologies and Employment Paper 2. Dynamic Balanced Scorecard Paper 3. The Procurement Process Paper 4. Scenario Planning Workshop Paper 5. Risk Analysis Methods Paper 6. Behavioural Stereotypes in Socio-Economic Systems Paper 7. Enterprise Resource Planning Paper 8. Marketing Research Paper 9. Group Model Building Paper 10. Business Dynamics Simulator Paper 11. Strategic Decision Support Paper 12. Rare Earth Elements Paper 13. Building a Learning Lab Paper 14. Human Resource Planning INDEX OF MODELS FOR BEGINNERS 1. Population Growth 2. Production and Inventory 3. How to Work More and Better 4. Project Dynamics 5. Innovatory Companies 6. Quality Control 7. Building Games and Learning Labs 8. Input Output Controls COLLECTION OF BOOKS Selected papers on System Dynamics 1.Agriculture and food production ISBN: 9781686984570 2.Business ISBN: 9781686997556 3.Ecology and the environment ISBN: 9781687000323 4.Economy: money and finances ISBN: 9781687003133 5.Energy ISBN: 9781687004932 6.Healthcare ISBN: 9781687006745 7.Housing and urban dynamics ISBN: 9781687008367 8.Supply chain and industrial dynamics ISBN: 9781687009975 9.Labor, human resources and social ISBN: 9781687015389 10.Sustainable development ISBN: 9781700341600 Detailed content in http://atc-innova.com/papers.htm ABOUT THE AUTHOR Juan Martin Garcia, expert in System Dynamics and System Thinking, Ph. D. Industrial Engineer UPC (Spain) and Postgraduate Diploma in Business Dynamics at the Sloan School of Management of the Massachusetts Institute of Technology (USA). He has been teacher of building simulation models during twenty years in several universities and now he teaches the online courses of Vensim in http://vensim.com/vensim-online-courses/
Download or read book Logistics of Production and Inventory written by S.C. Graves and published by Elsevier. This book was released on 1993-05-27 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook
Download or read book Planning Production and Inventories in the Extended Enterprise written by Karl G Kempf and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps. Included in Volume 1 are papers on the Historical Foundations of Manufacturing Planning and Control; Advanced Planning and Scheduling Systems; Sustainable Product Development and Manufacturing; Uncertainty and Production Planning; Demand Forecasting; Production Capacity; Data in Production and Supply Chain Planning; Financial Uncertainty in SC Models; Field Based Research in Production Control; Collaborative SCM; Sequencing and Coordination in Outsourcing and Subcontracting Operations; Inventory Management; Pricing, Variety and Inventory Decisions for Substitutable Items; Perishable and Aging Inventories; Optimization Models of Production Planning Problems; Aggregate Modeling of Manufacturing Systems; Robust Stability Analysis of Decentralized Supply Chains; Simulation in Production Planning; and Simulation-Optimization in Support of Tactical and Strategic Enterprise Decisions. Included in Volume 2 are papers on Workload and Lead-Time Considerations under Uncertainty; Production Planning and Scheduling; Production Planning Effects on Dynamic Behavior of A Simple Supply Chain; Supply and Demand in Assemble-to-Order Supply Chains; Quantitative Risk Assessment in Supply Chains; A Practical Multi-Echelon Inventory Model with Semiconductor Application; Supplier Managed Inventory for Custom Items with Long Lead Times; Decentralized Supply Chain Formation; A Cooperative Game Approach to Procurement Network Formation; Flexible SC Contracts with Options; Build-to-Order Meets Global Sourcing for the Auto Industry; Practical Modeling in Automotive Production; Discrete Event Simulation Models; Diagnosing and Tuning a Statistical Forecasting System; Enterprise-Wide SC Planning in Semiconductor and Package Operations; Production Planning in Plastics; SC Execution Using Predictive Control; Production Scheduling in The Pharmaceutical Industry; Computerized Scheduling for Continuous Casting in Steelmaking; and Multi-Model Production Planning and Scheduling in an Industrial Environment.
Download or read book Integrated Models in Production Planning Inventory Quality and Maintenance written by M.A. Rahim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production planning, inventory management, quality control, and maintenance policy are critical components of the manufacturing system. The effective integration of these four components gives a manufacturing operation the competitive edge in today's global market place. Integrated Models in Production Planning, Inventory, Quality, and Maintenance provides, in one volume, the latest developments in the integration of production, quality, and maintenance models. Prominent researchers, who are actively engaged in these areas, have contributed the topical chapters focused on the most recent issues in the area. In Part I, Ben-Daya and Rahim provide an overview of the literature dealing with integrated models for production, quality, and maintenance. Directions for future research are outlined. Part II contains six chapters (chapters 2 to 6) dealing with integrated models for production and maintenance. Part III deals with integrated production/inventory and quality models in chapters 7-11. Part IV focuses on quality and maintenance integrated models and contains two chapters. Part V deals with warranty, manufacturing, and quality and contains two chapters. Part VI addresses issues related to quality and contains three chapters (chapters 16-18).
Download or read book Inventory Management and Production Planning and Scheduling written by Edward A. Silver and published by Wiley. This book was released on 1998-01-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a revision of a classic which integrates managerial issues with practical applications, providing a broad foundation for decision-making. It incorporates recent developments in inventory management, including Just-in-Time Management, Materials Requirement Planning, and Total Quality Management.
Download or read book Decision Systems for Inventory Management and Production Planning written by Edward A. Silver and published by . This book was released on 1985-01-18 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth discussion of the major decisions in production planning, scheduling, and inventory management faced by organizations, both private and public. Strategic and operational issues are covered, as well as the latest systems used to make decisions, including Just-in-Time Manufacturing, KANBAN, Distribution Requirements Planning, and PUSH Control. A series of cases focusing on one organization complement the text's discussion, and several problem sets are also included. An extensive list of references allows the advanced student to pursue topics of interest in more detail.
Download or read book Inventory Management and Production Planning Under Stochastic Demand and Production Capacity Processes in the Paper Industry written by Hu Liu and published by . This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Planning Scheduling and Inventory Control written by Douglas C. Montgomery and published by . This book was released on 1974 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inventory and Production Management in Supply Chains written by Edward A. Silver and published by CRC Press. This book was released on 2016-12-19 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a team of experts, the new edition of this bestseller presents practical techniques for managing inventory and production throughout supply chains. It covers the current context of inventory and production management, replenishment systems for managing individual inventories within a firm, managing inventory in multiple locations and firms, and production management. The book presents sophisticated concepts and solutions with an eye towards today’s economy of global demand, cost-saving, and rapid cycles. It explains how to decrease working capital and how to deal with coordinating chains across boundaries.
Download or read book Production Planning with Capacitated Resources and Congestion written by Hubert Missbauer and published by Springer Nature. This book was released on 2020-02-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of recent developments in production planning. The monograph begins with an introductory chapter reviewing the need for these production planning models, that operate by determining time-phased releases of work into the facility or supply chain, relating these to the Manufacturing Planning and Control (MPC) and Advanced Planning and Scheduling (APS) frameworks, that form the basis of most academic research and industrial practice. The extensive body of work on Workload Control is also placed in this context, and proves the need for improved models with a discussion of the difficulties, these approaches encounter. The next two chapters present a detailed review of the state of the art in optimization models based on exogenous planned lead times, and examines the cases where these can take both integer and fractional values. The difficulties arising in estimating planned lead times are consistent with factory behavior which are highlighted, noting that many of these lead to non-convex optimization models. Attempts to address these difficulties by iterative multimodel approaches, that combine simulation and mathematical programming, are also discussed in detail. The next three chapters of the volume address the set of techniques developed using clearing functions, which represent the expected output of a resource in a planning period, as a function of the expected workload of the resource, during that period. The chapters on this subject propose a basic optimization model for multiple products, discuss the difficulties of this model and some possible solutions. It also reviews prior work, and discuss a number of alternative formulations of the clearing function concept with their respective advantages and disadvantages. Applications to lot sizing decisions and a number of other specific problems are also described. This volume concludes with an assessment of the state of the art described in the volume, and several directions for future work.
Download or read book Dynamic Inventory Management in Reverse Logistics written by Rainer Kleber and published by Springer Science & Business Media. This book was released on 2007-02-02 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of product recovery into regular production processes enables new opportunities for cost savings. In case of a dynamic planning situation, for instance when dealing with seasonality or the product life cycle, new motives for keeping stock arise. The work aims to identify those motives and to describe their effects by using methods of optimal control theory.
Download or read book Planning Production and Inventories in the Extended Enterprise written by Karl G Kempf and published by Springer. This book was released on 2011-04-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps. Included in Volume 1 are papers on the Historical Foundations of Manufacturing Planning and Control; Advanced Planning and Scheduling Systems; Sustainable Product Development and Manufacturing; Uncertainty and Production Planning; Demand Forecasting; Production Capacity; Data in Production and Supply Chain Planning; Financial Uncertainty in SC Models; Field Based Research in Production Control; Collaborative SCM; Sequencing and Coordination in Outsourcing and Subcontracting Operations; Inventory Management; Pricing, Variety and Inventory Decisions for Substitutable Items; Perishable and Aging Inventories; Optimization Models of Production Planning Problems; Aggregate Modeling of Manufacturing Systems; Robust Stability Analysis of Decentralized Supply Chains; Simulation in Production Planning; and Simulation-Optimization in Support of Tactical and Strategic Enterprise Decisions. Included in Volume 2 are papers on Workload and Lead-Time Considerations under Uncertainty; Production Planning and Scheduling; Production Planning Effects on Dynamic Behavior of A Simple Supply Chain; Supply and Demand in Assemble-to-Order Supply Chains; Quantitative Risk Assessment in Supply Chains; A Practical Multi-Echelon Inventory Model with Semiconductor Application; Supplier Managed Inventory for Custom Items with Long Lead Times; Decentralized Supply Chain Formation; A Cooperative Game Approach to Procurement Network Formation; Flexible SC Contracts with Options; Build-to-Order Meets Global Sourcing for the Auto Industry; Practical Modeling in Automotive Production; Discrete Event Simulation Models; Diagnosing and Tuning a Statistical Forecasting System; Enterprise-Wide SC Planning in Semiconductor and Package Operations; Production Planning in Plastics; SC Execution Using Predictive Control; Production Scheduling in The Pharmaceutical Industry; Computerized Scheduling for Continuous Casting in Steelmaking; and Multi-Model Production Planning and Scheduling in an Industrial Environment.
