Download or read book Grid Generation and Adaptive Algorithms written by Marshall W. Bern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IMA Volume in Mathematics and its Applications GRID GENERATION AND ADAPTIVE ALGORITHMS is based on the proceedings of a workshop with the same title. The work shop was an integral part of the 1996-97 IMA program on "MATHEMAT ICS IN HIGH-PERFORMANCE COMPUTING. " I would like to thank Marshall Bern (Xerox, Palo Alto Research Cen ter), Joseph E. Flaherty (Department of Computer Science, Rensselaer Polytechnic Institute), and Mitchell Luskin (School of Mathematics, Uni versity of Minnesota), for their excellent work as organizers of the meeting and for editing the proceedings. I also take this opportunity to thank the National Science Founda tion (NSF), Department of Energy (DOE), and the Army Research Office (ARO), whose financial support made the workshop possible. Willard Miller, Jr. , Professor and Director v PREFACE Scientific and engineering computation has become so complex that traditional numerical computation on uniform meshes is generally not pos sible or too expensive. Mesh generation must reflect both the domain geometry and the expected solution characteristics. Meshes should, fur thermore, be related to the solution through computable estimates of dis cretization errors. This, suggests an automatic and adaptive process where an initial mesh is enriched with the goal of computing a solution with prescribed accuracy specifications in an optimal manner. While automatic mesh generation procedures and adaptive strategies are becoming available, major computational challenges remain. Three-dimensional mesh genera tion is still far from automatic.

Download or read book Parallel Computing Fundamentals And Applications Proceedings Of The International Conference Parco99 written by Erik H D'hollander and published by World Scientific. This book was released on 2000-05-31 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This millennium will see the increased use of parallel computing technologies at all levels of mainstream computing. Most computer hardware will use these technologies to achieve higher computing speeds, high speed access to very large distributed databases and greater flexibility through heterogeneous computing. These developments can be expected to result in the extended use of all types of parallel computers in virtually all areas of human endeavour. Compute-intensive problems in emerging areas such as financial modelling and multimedia systems, in addition to traditional application areas of parallel computing such as scientific computing and simulation, will stimulate the developments. Parallel computing as a field of scientific research and development will move from a niche concentrating on solving compute-intensive scientific and engineering problems to become one of the fundamental computing technologies.This book gives a retrospective view of what has been achieved in the parallel computing field during the past three decades, as well as a prospective view of expected future developments./a

Download or read book Geometric Modeling and Mesh Generation from Scanned Images written by Yongjie Jessica Zhang and published by CRC Press. This book was released on 2018-09-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-Edge Techniques to Better Analyze and Predict Complex Physical Phenomena Geometric Modeling and Mesh Generation from Scanned Images shows how to integrate image processing, geometric modeling, and mesh generation with the finite element method (FEM) to solve problems in computational biology, medicine, materials science, and engineering. Based on the author’s recent research and course at Carnegie Mellon University, the text explains the fundamentals of medical imaging, image processing, computational geometry, mesh generation, visualization, and finite element analysis. It also explores novel and advanced applications in computational biology, medicine, materials science, and other engineering areas. One of the first to cover this emerging interdisciplinary field, the book addresses biomedical/material imaging, image processing, geometric modeling and visualization, FEM, and biomedical and engineering applications. It introduces image-mesh-simulation pipelines, reviews numerical methods used in various modules of the pipelines, and discusses several scanning techniques, including ones to probe polycrystalline materials. The book next presents the fundamentals of geometric modeling and computer graphics, geometric objects and transformations, and curves and surfaces as well as two isocontouring methods: marching cubes and dual contouring. It then describes various triangular/tetrahedral and quadrilateral/hexahedral mesh generation techniques. The book also discusses volumetric T-spline modeling for isogeometric analysis (IGA) and introduces some new developments of FEM in recent years with applications.

Download or read book Computational Geomechanics and Hydraulic Structures written by Sheng-Hong Chen and published by Springer. This book was released on 2018-06-21 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research into developing and applying computational tools to estimate the performance and safety of hydraulic structures from the planning and construction stage to the service period. Based on the results of a close collaboration between the author and his colleagues, friends, students and field engineers, it shows how to achieve a good correlation between numerical computation and the actual in situ behavior of hydraulic structures. The book’s heuristic and visualized style disseminates the philosophy and road map as well as the findings of the research. The chapters reflect the various aspects of the three typical and practical methods (the finite element method, the block element method, the composite element method) that the author has been working on and made essential contributions to since the 1980s. This book is an advanced continuation of Hydraulic Structures by the same author, published by Springer in 2015.

Download or read book Finite Element Mesh Generation written by Daniel S.H. Lo and published by CRC Press. This book was released on 2015-01-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the Progression of Meshing Technologies and Their Applications Finite Element Mesh Generation provides a concise and comprehensive guide to the application of finite element mesh generation over 2D domains, curved surfaces, and 3D space. Organised according to the geometry and dimension of the problem domains, it develops from the basic meshing algorithms to the most advanced schemes to deal with problems with specific requirements such as boundary conformity, adaptive and anisotropic elements, shape qualities, and mesh optimization. It sets out the fundamentals of popular techniques, including: Delaunay triangulation Advancing-front (ADF) approach Quadtree/Octree techniques Refinement and optimization-based strategies From the geometrical and the topological aspects and their associated operations and inter-relationships, each approach is vividly described and illustrated with examples. Beyond the algorithms, the book also explores the practice of using metric tensor and surface curvatures for generating anisotropic meshes on parametric space. It presents results from research including 3D anisotropic meshing, mesh generation over unbounded domains, meshing by means of intersection, re-meshing by Delaunay-ADF approach, mesh refinement and optimization, generation of hexahedral meshes, and large scale and parallel meshing, along with innovative unpublished meshing methods. The author provides illustrations of major meshing algorithms, pseudo codes, and programming codes in C++ or FORTRAN. Geared toward research centers, universities, and engineering companies, Finite Element Mesh Generation describes mesh generation methods and fundamental techniques, and also serves as a valuable reference for laymen and experts alike.

Download or read book Handbook of Grid Generation written by Joe F. Thompson and published by CRC Press. This book was released on 1998-12-29 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Grid Generation addresses the use of grids (meshes) in the numerical solutions of partial differential equations by finite elements, finite volume, finite differences, and boundary elements. Four parts divide the chapters: structured grids, unstructured girds, surface definition, and adaption/quality. An introduction to each section provides a roadmap through the material. This handbook covers: Fundamental concepts and approaches Grid generation process Essential mathematical elements from tensor analysis and differential geometry, particularly relevant to curves and surfaces Cells of any shape - Cartesian, structured curvilinear coordinates, unstructured tetrahedra, unstructured hexahedra, or various combinations Separate grids overlaid on one another, communicating data through interpolation Moving boundaries and internal interfaces in the field Resolving gradients and controlling solution error Grid generation codes, both commercial and freeware, as well as representative and illustrative grid configurations Handbook of Grid Generation contains 37 chapters as well as contributions from more than 100 experts from around the world, comprehensively evaluating this expanding field and providing a fundamental orientation for practitioners.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2001 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research in Progress written by and published by . This book was released on 1992 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Computing on Vector Systems 2011 written by Michael M. Resch and published by Springer Science & Business Media. This book was released on 2011-12-02 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the state of the art in high performance computing and simulation on modern supercomputer architectures. It covers trends in hardware and software development in general and specifically the future of vector-based systems and heterogeneous architectures. The application contributions cover computational fluid dynamics, material science, medical applications and climate research. Innovative fields like coupled multi-physics or multi-scale simulations are presented. All papers were chosen from presentations given at the 13th Teraflop Workshop held in October 2010 at Tohoku University, Japan.

Download or read book Parallel Solution Methods in Computational Mechanics written by Manolis Papadrakakis and published by . This book was released on 1997-04-17 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows the previously published title, Solving Large-scale Problems in Mechanics, edited by M. Papadrakakis. This first volume to be published in the Wiley Series in Solving Large-scale Problems in Mechanics is devoted to high-performance computing using the new generation of computers with parallel and distributed computing capabilities. Parallel and distributed processing is a rapidly growing area of high technology where engineering applications lagged behind hardware advances. New algorithms and codes are required in order to exploit effectively modern computer architectures, as programs suitable for conventional computers achieve very modest performances on these new machines. There is therefore an urgent need to develop and test powerful solution and data handling techniques capable of exploiting the potential of modern computers and of accomplishing the solution of complex engineering problems in an acceptable computing time. This volume intends capturing the latest developments in the field and to serve as an essential reference book on the subject. It comprises a comprehensive state-of-the-art treatment of theory and practice, illustrated by extensive numerical examples.

Download or read book Modeling Mesh Generation and Adaptive Numerical Methods for Partial Differential Equations written by Ivo Babuska and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: With considerations such as complex-dimensional geometries and nonlinearity, the computational solution of partial differential systems has become so involved that it is important to automate decisions that have been normally left to the individual. This book covers such decisions: 1) mesh generation with links to the software generating the domain geometry, 2) solution accuracy and reliability with mesh selection linked to solution generation. This book is suited for mathematicians, computer scientists and engineers and is intended to encourage interdisciplinary interaction between the diverse groups.

Download or read book The Scaled Boundary Finite Element Method written by Chongmin Song and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: An informative look at the theory, computer implementation, and application of the scaled boundary finite element method This reliable resource, complete with MATLAB, is an easy-to-understand introduction to the fundamental principles of the scaled boundary finite element method. It establishes the theory of the scaled boundary finite element method systematically as a general numerical procedure, providing the reader with a sound knowledge to expand the applications of this method to a broader scope. The book also presents the applications of the scaled boundary finite element to illustrate its salient features and potentials. The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation covers the static and dynamic stress analysis of solids in two and three dimensions. The relevant concepts, theory and modelling issues of the scaled boundary finite element method are discussed and the unique features of the method are highlighted. The applications in computational fracture mechanics are detailed with numerical examples. A unified mesh generation procedure based on quadtree/octree algorithm is described. It also presents examples of fully automatic stress analysis of geometric models in NURBS, STL and digital images. Written in lucid and easy to understand language by the co-inventor of the scaled boundary element method Provides MATLAB as an integral part of the book with the code cross-referenced in the text and the use of the code illustrated by examples Presents new developments in the scaled boundary finite element method with illustrative examples so that readers can appreciate the significant features and potentials of this novel method—especially in emerging technologies such as 3D printing, virtual reality, and digital image-based analysis The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation is an ideal book for researchers, software developers, numerical analysts, and postgraduate students in many fields of engineering and science.

Download or read book Logic Design of NanoICS written by Svetlana N. Yanushkevich and published by CRC Press. This book was released on 2017-12-19 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's engineers will confront the challenge of a new computing paradigm, relying on micro- and nanoscale devices. Logic Design of NanoICs builds a foundation for logic in nanodimensions and guides you in the design and analysis of nanoICs using CAD. The authors present data structures developed toward applications rather than a purely theoretical treatment. Requiring only basic logic and circuits background, Logic Design of NanoICs draws connections between traditional approaches to design and modern design in nanodimensions. The book begins with an introduction to the directions and basic methodology of logic design at the nanoscale, then proceeds to nanotechnologies and CAD, graphical representation of switching functions and networks, word-level and linear word-level data structures, 3-D topologies based on hypercubes, multilevel circuit design, and fault-tolerant computation in hypercube-like structures. The authors propose design solutions and techniques, going beyond the underlying technology to provide more applied knowledge. This design-oriented reference is written for engineers interested in developing the next generation of integrated circuitry, illustrating the discussion with approximately 250 figures and tables, 100 equations, 250 practical examples, and 100 problems. Each chapter concludes with a summary, references, and a suggested reading section.

Download or read book Delaunay Mesh Generation written by Siu-Wing Cheng and published by CRC Press. This book was released on 2016-04-19 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by authors at the forefront of modern algorithms research, Delaunay Mesh Generation demonstrates the power and versatility of Delaunay meshers in tackling complex geometric domains ranging from polyhedra with internal boundaries to piecewise smooth surfaces. Covering both volume and surface meshes, the authors fully explain how and why thes

Download or read book Modeling and Simulation Based Engineering written by Satya N. Atluri and published by . This book was released on 1998 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Space Filling Curves written by Michael Bader and published by Springer Science & Business Media. This book was released on 2012-10-13 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book provides an introduction to using space-filling curves (SFC) as tools in scientific computing. Special focus is laid on the representation of SFC and on resulting algorithms. For example, grammar-based techniques are introduced for traversals of Cartesian and octree-type meshes, and arithmetisation of SFC is explained to compute SFC mappings and indexings. The locality properties of SFC are discussed in detail, together with their importance for algorithms. Templates for parallelisation and cache-efficient algorithms are presented to reflect the most important applications of SFC in scientific computing. Special attention is also given to the interplay of adaptive mesh refinement and SFC, including the structured refinement of triangular and tetrahedral grids. For each topic, a short overview is given on the most important publications and recent research activities.

Download or read book Special Course on Parallel Computing in CFD written by Organisation du traité de l'Atlantique nord and published by . This book was released on 1993 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: