Download or read book A Coupled Vibratory Gyroscope Network with Bi directional Uni directional and Direct Coupling written by Huy Khanh Vu and published by . This book was released on 2011 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Coupled Vibratory Gyroscope Network with Bi directional Uni directional and Direct Coupling written by and published by . This book was released on 2011 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, inertial sensors have been extensively studied and thoroughly researched to enhance their performance and robustness, overcoming great challenges for better innovations. The complicated fabrication processes of inertial sensors' manufacturing may potentially cause defects and lead to the reduction in their capabilities for detection of signals while environmental factors such as temperature can pose other obstacles and prevent the devices from obtaining the desired strength or stability. Among the many technologies that currently develop micromachined gyroscopes, MEMS (Microelectromechanical Systems) have been one of the fastest growing technologies used for gyroscope manufacturing due to their low-cost. However, one of the greatest challenges of the MEMS technology for micromachined gyroscopes is that it does not meet the requirements for inertial guidance systems. In this work, an approach is proposed to improve the robustness of a Coupled Inertial Navigation Sensor (CINS) System, which consists of a ring of vibratory gyroscopes coupled along their driving axes, bi-directionally, uni-directionary, and directly. While the sum response of synchronized states gains a larger output than an individual one, the purpose of the coupling in the drive-mode is to enhance the sensitivity and minimize the negative effects of the drift rate in a CINS device. Intensive numerical simulations are performed to investigate the behavior of this high dimensional system and its response to changes in parameters, mainly the number of gyroscopes, Coriolis force, and coupling strength. Bifurcation diagrams outlining the response of the system are obtained numerically with the aid of the continuation software AUTO 2000 and XPP. Individual behaviors, including synchronization, are further analyzed using analytical methods based on perturbation theory. The Lyapunov-Schmidt reduction is applied to determine the stability properties of the synchronized solution, which emerges through a pitchfork bifurcation that can be either supercritical or subcritical, depending on the coefficients of the nonlinear terms in the governing equations of motion. Abstract group theory is also used to predict the different patterns of motion for different ring sizes. The study of stochastic noise, assumed to be Gaussian band-limited, is explored extensively to investigate the benefits of the coupling systems over the un-coupled ones. Results show that coupling can reduce phase drift and even lead to a new concept of a drive-free gyroscope system.

Download or read book The Anatomy of the Gyroscope written by Frank W. Cousins and published by . This book was released on 1988 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optical Gyros and Their Application written by and published by North Atlantic Treaty Organization Resear Rganization. This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Fiber Optic Gyroscope Second Edition written by Herve C. Lefevre and published by Artech House. This book was released on 2014-10-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the field’s leading experts, this landmark reference presents a thorough system analysis of the fiber-optic gyroscope (FOG), describing the concepts that have emerged as the preferred solutions for obtaining a practical device. This book’s first edition was published in the early 1990’s. If the basic design rules of the FOG have remained unchanged, the technology has certainly matured, and the expectations presented in the first edition have been largely exceeded. This second edition is updated throughout, featuring new content on Allan variance; testing with optical coherence domain polarimetry; the Shupe effect; and rare-Earth doped fiber ASE sources. In addition, brand new comprehensive appendixes cover the optics, single-mode fiber optics, and integrated optics necessary to understand the fiber gyro and provide an appropriate vocabulary for communicating with electronic component designers.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book Pedestrian Inertial Navigation with Self Contained Aiding written by Andrei M. Shkel and published by John Wiley & Sons. This book was released on 2021-08-10 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore an insightful summary of the major self-contained aiding technologies for pedestrian navigation from established and emerging leaders in the field Pedestrian Inertial Navigation with Self-Contained Aiding delivers a comprehensive and broad treatment of self-contained aiding techniques in pedestrian inertial navigation. The book combines an introduction to the general concept of navigation and major navigation and aiding techniques with more specific discussions of topics central to the field, as well as an exploration of the future of the future of the field: Ultimate Navigation Chip (uNavChip) technology. The most commonly used implementation of pedestrian inertial navigation, strapdown inertial navigation, is discussed at length, as are the mechanization, implementation, error analysis, and adaptivity of zero-velocity update aided inertial navigation algorithms. The book demonstrates the implementation of ultrasonic sensors, ultra-wide band (UWB) sensors, and magnetic sensors. Ranging techniques are considered as well, including both foot-to-foot ranging and inter-agent ranging, and learning algorithms, navigation with signals of opportunity, and cooperative localization are discussed. Readers will also benefit from the inclusion of: A thorough introduction to the general concept of navigation as well as major navigation and aiding techniques An exploration of inertial navigation implementation, Inertial Measurement Units, and strapdown inertial navigation A discussion of error analysis in strapdown inertial navigation, as well as the motivation of aiding techniques for pedestrian inertial navigation A treatment of the zero-velocity update (ZUPT) aided inertial navigation algorithm, including its mechanization, implementation, error analysis, and adaptivity Perfect for students and researchers in the field who seek a broad understanding of the subject, Pedestrian Inertial Navigation with Self-Contained Aiding will also earn a place in the libraries of industrial researchers and industrial marketing analysts who need a self-contained summary of the foundational elements of the field.

Download or read book Biologically Inspired Robotics written by Yunhui Liu and published by CRC Press. This book was released on 2011-12-21 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers in the fields of control engineering, robotics, and biomedical engineering, this text helps readers understand the technology and principles in this emerging field.

Download or read book Advanced Calculus written by Pietro-Luciano Buono and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-09-12 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a high-level introduction to multi-variable differential calculus. Differential forms are introduced incrementally in the narrative, eventually leading to a unified treatment of Green’s, Stokes’ and Gauss’ theorems. Furthermore, the presentation offers a natural route to differential geometry. Contents: Calculus of Vector Functions Tangent Spaces and 1-forms Line Integrals Differential Calculus of Mappings Applications of Differential Calculus Double and Triple Integrals Wedge Products and Exterior Derivatives Integration of Forms Stokes’ Theorem and Applications

Download or read book Wearable Robots written by José L. Pons and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wearable robot is a mechatronic system that is designed around the shape and function of the human body, with segments and joints corresponding to those of the person it is externally coupled with. Teleoperation and power amplification were the first applications, but after recent technological advances the range of application fields has widened. Increasing recognition from the scientific community means that this technology is now employed in telemanipulation, man-amplification, neuromotor control research and rehabilitation, and to assist with impaired human motor control. Logical in structure and original in its global orientation, this volume gives a full overview of wearable robotics, providing the reader with a complete understanding of the key applications and technologies suitable for its development. The main topics are demonstrated through two detailed case studies; one on a lower limb active orthosis for a human leg, and one on a wearable robot that suppresses upper limb tremor. These examples highlight the difficulties and potentialities in this area of technology, illustrating how design decisions should be made based on these. As well as discussing the cognitive interaction between human and robot, this comprehensive text also covers: the mechanics of the wearable robot and it’s biomechanical interaction with the user, including state-of-the-art technologies that enable sensory and motor interaction between human (biological) and wearable artificial (mechatronic) systems; the basis for bioinspiration and biomimetism, general rules for the development of biologically-inspired designs, and how these could serve recursively as biological models to explain biological systems; the study on the development of networks for wearable robotics. Wearable Robotics: Biomechatronic Exoskeletons will appeal to lecturers, senior undergraduate students, postgraduates and other researchers of medical, electrical and bio engineering who are interested in the area of assistive robotics. Active system developers in this sector of the engineering industry will also find it an informative and welcome resource.

Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.

Download or read book Blindsight written by Peter Watts and published by Macmillan. This book was released on 2006-10-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hugo and Shirley Jackson award-winning Peter Watts stands on the cutting edge of hard SF with his acclaimed novel, Blindsight Two months since the stars fell... Two months of silence, while a world held its breath. Now some half-derelict space probe, sparking fitfully past Neptune's orbit, hears a whisper from the edge of the solar system: a faint signal sweeping the cosmos like a lighthouse beam. Whatever's out there isn't talking to us. It's talking to some distant star, perhaps. Or perhaps to something closer, something en route. So who do you send to force introductions with unknown and unknowable alien intellect that doesn't wish to be met? You send a linguist with multiple personalities, her brain surgically partitioned into separate, sentient processing cores. You send a biologist so radically interfaced with machinery that he sees x-rays and tastes ultrasound. You send a pacifist warrior in the faint hope she won't be needed. You send a monster to command them all, an extinct hominid predator once called vampire, recalled from the grave with the voodoo of recombinant genetics and the blood of sociopaths. And you send a synthesist—an informational topologist with half his mind gone—as an interface between here and there. Pray they can be trusted with the fate of a world. They may be more alien than the thing they've been sent to find. At the Publisher's request, this title is being sold without Digital Rights Management Software (DRM) applied.

Download or read book Social Transformation Digital Way written by Jyotsna Kumar Mandal and published by Springer. This book was released on 2018-08-23 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 52nd Annual Convention of the Computer Society of India, CSI 2017, held in Kolkata, India, in January 2018. The 59 revised papers presented were carefully reviewed and selected from 157 submissions. The theme of CSI 2017, Social Transformation – Digital Way, was selected to highlight the importance of technology for both central and state governments at their respective levels to achieve doorstep connectivity with its citizens. The papers are organized in the following topical sections: Signal processing, microwave and communication engineering; circuits and systems; data science and data analytics; bio computing; social computing; mobile, nano, quantum computing; data mining; security and forensics; digital image processing; and computational intelligence.

Download or read book Whole Angle MEMS Gyroscopes written by Doruk Senkal and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the mathematical framework, technical language, and control systems know-how needed to design, develop, and instrument micro-scale whole-angle gyroscopes This comprehensive reference covers the technical fundamentals, mathematical framework, and common control strategies for degenerate mode gyroscopes, which are used in high-precision navigation applications. It explores various energy loss mechanisms and the effect of structural imperfections, along with requirements for continuous rate integrating gyroscope operation. It also provides information on the fabrication of MEMS whole-angle gyroscopes and the best methods of sustaining oscillations. Whole-Angle Gyroscopes: Challenges and Opportunities begins with a brief overview of the two main types of Coriolis Vibratory Gyroscopes (CVGs): non-degenerate mode gyroscopes and degenerate mode gyroscopes. It then introduces readers to the Foucault Pendulum analogy and a review of MEMS whole angle mode gyroscope development. Chapters cover: dynamics of whole-angle coriolis vibratory gyroscopes; fabrication of whole-angle coriolis vibratory gyroscopes; energy loss mechanisms of coriolis vibratory gyroscopes; and control strategies for whole-angle coriolis vibratory gyro- scopes. The book finishes with a chapter on conventionally machined micro-machined gyroscopes, followed by one on micro-wineglass gyroscopes. In addition, the book: Lowers barrier to entry for aspiring scientists and engineers by providing a solid understanding of the fundamentals and control strategies of degenerate mode gyroscopes Organizes mode-matched mechanical gyroscopes based on three classifications: wine-glass, ring/disk, and mass spring mechanical elements Includes case studies on conventionally micro-machined and 3-D micro-machined gyroscopes Whole-Angle Gyroscopes is an ideal book for researchers, scientists, engineers, and college/graduate students involved in the technology. It will also be of great benefit to engineers in control systems, MEMS production, electronics, and semi-conductors who work with inertial sensors.

Download or read book Dictionary of Industrial Terms written by Michael D. Holloway and published by John Wiley & Sons. This book was released on 2013-01-07 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most comprehensive dictionary of maintenance and reliability terms ever compiled, covering the process, manufacturing, and other related industries, every major area of engineering used in industry, and more. The over 15,000 entries are all alphabetically arranged and include special features to encourage usage and understanding. They are supplemented by hundreds of figures and tables that clearly demonstrate the principles & concepts behind important process control, instrumentation, reliability, machinery, asset management, lubrication, corrosion, and much much more. With contributions by leading researchers in the field: Zaki Yamani Bin Zakaria Department, Chemical Engineering, Faculty Universiti Teknologi Malaysia, Malaysia Prof. Jelenka B. Savkovic-Stevanovic, Chemical Engineering Dept, University of Belgrade, Serbia Jim Drago, PE, Garlock an EnPro Industries family of companies, USA Robert Perez, President of Pumpcalcs, USA Luiz Alberto Verri, Independent Consultatnt, Verri Veritatis Consultoria, Brasil Matt Tones, Garlock an EnPro Industries family of companies, USA Dr. Reza Javaherdashti, formerly with Qatar University, Doha-Qatar Prof. Semra Bilgic, Faculty of Sciences, Department of Physical Chemistry, Ankara University, Turkey Dr. Mazura Jusoh , Chemical Engineering Department, Universiti Teknologi Malaysia Jayesh Ramesh Tekchandaney, Unique Mixers and Furnaces Pvt. Ltd. Dr. Henry Tan, Senior Lecturer in Safety & Reliability Engineering, and Subsea Engineering, School of Engineering, University of Aberdeen Fiddoson Fiddo, School of Engineering, University of Aberdeen Prof. Roy Johnsen, NTNU, Norway Prof. N. Sitaram , Thermal Turbomachines Laboratory, Department of Mechanical Engineering, IIT Madras, Chennai India Ghazaleh Mohammadali, IranOilGas Network Members' Services Greg Livelli, ABB Instrumentation, Warminster, Pennsylvania, USA Gas Processors Suppliers Association (GPSA)

Download or read book ACS Without an Attitude written by Harold L. Hallock and published by Springer. This book was released on 2017-05-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book de-emphasizes the formal mathematical description of spacecraft on-board attitude and orbit applications in favor of a more qualitative, concept-oriented presentation of these topics. The information presented in this book was originally given as a set of lectures in 1999 and 2000 instigated by a NASA Flight Software Branch Chief at Goddard Space Flight Center. The Branch Chief later suggested this book. It provides an approachable insight into the area and is not intended as an essential reference work. ACS Without an Attitude is intended for programmers and testers new to the field who are seeking a commonsense understanding of the subject matter they are coding and testing in the hope that they will reduce their risk of introducing or missing the key software bug that causes an abrupt termination in their spacecraft’s mission. In addition, the book will provide managers and others working with spacecraft with a basic understanding of this subject.